Randomness...I setup my system to automatically login, but it seems to
boot up and let me start a terminal only to show the login prompt (that
I can't see). I've worked around it, but that seems broken too and
might stop others from even using their system.
Inside broken install sudo xrandr -q gives...
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1920 x 1200, maximum 1920 x 1200
default connected 1920x1200+0+0 0mm x 0mm
1920x1200 50.0*
1920x1080 51.0 52.0 53.0 54.0 55.0 56.0 57.0
1680x1050 58.0 59.0
1600x1200 60.0
1600x1024 61.0
1440x900 62.0
1400x1050 63.0 64.0 65.0
1360x768 66.0 67.0
1280x1024 68.0 69.0 70.0
1280x960 71.0 72.0 73.0
1280x720 74.0 75.0 76.0
1152x864 77.0 78.0 79.0 80.0 81.0 82.0 83.0
1024x768 84.0 85.0 86.0 87.0 88.0 89.0
960x720 90.0 91.0
960x600 92.0
960x540 93.0
928x696 94.0 95.0
896x672 96.0 97.0
840x525 98.0 99.0 100.0 101.0 102.0
832x624 103.0
800x600 104.0 105.0 106.0 107.0 108.0 109.0 110.0
111.0 112.0 113.0
800x512 114.0
720x576 115.0
720x480 116.0 117.0
720x450 118.0
720x400 119.0
700x525 120.0 121.0 122.0 123.0
680x384 124.0 125.0
640x512 126.0 127.0 128.0
640x480 129.0 130.0 131.0 132.0 133.0 134.0 135.0
640x400 136.0
640x350 137.0
576x432 138.0 139.0 140.0 141.0 142.0 143.0 144.0
512x384 145.0 146.0 147.0 148.0 149.0
416x312 150.0
400x300 151.0 152.0 153.0 154.0 155.0
360x200 156.0
320x240 157.0 158.0 159.0 160.0
320x200 161.0
320x175 162.0
And sudo get-edid | parse-edid gives...
parse-edid: parse-edid version 2.0.0
get-edid: get-edid version 2.0.0
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0x11100 "NVIDIA"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call successful
parse-edid: EDID checksum passed.
parse-edid: first bytes don't match EDID version 1 header
parse-edid: do not trust output (if any).
# EDID version 131 revision 1
Section "Monitor"
Identifier "@XA:1f14"
VendorName "@XA"
ModelName "@XA:1f14"
# DPMS capabilities: Active off:no Suspend:no Standby:no
Mode "37x68" # vfreq 714.533Hz, hfreq 72.168kHz
DotClock 113.520000
HTimings 37 37 195 1573
VTimings 68 116 133 101
EndMode
Mode "85x68" # vfreq 632.173Hz, hfreq 63.849kHz
DotClock 103.500000
HTimings 85 85 115 1621
VTimings 68 108 152 101
EndMode
Mode "150x68" # vfreq 933.019Hz, hfreq 94.235kHz
DotClock 158.880000
HTimings 150 150 212 1686
VTimings 68 100 134 101
EndMode
Mode "69x68" # vfreq 682.243Hz, hfreq 68.907kHz
DotClock 112.800000
HTimings 69 69 99 1637
VTimings 68 68 68 101
EndMode
EndSection
** Attachment added: "Xorg log from broken install (nvidia driver"
https://bugs.launchpad.net/ubuntu/+bug/891947/+attachment/2606558/+files/Xorg.0.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/891947
Title:
Desktop not completely displayed after install
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/891947/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
