Tried adding the bond0 interface to a bridge but it's not in the "RUNNING"
state:
# cat /etc/network/interfaces
...
auto bond0
iface bond0 inet manual
bond-mode 802.3ad
bond-lacp_rate slow
bond-miimon 100
bond-updelay 200
bond-slaves none
post-up ip link set dev bond0 up
post-down ip link set dev bond0 down
auto eth2
iface eth2 inet manual
bond-master bond0
auto eth3
iface eth3 inet manual
bond-master bond0
auto br0
iface br0 inet manual
bridge_ports bond0
bridge_stp off
# ifconfig bond0
bond0 Link encap:Ethernet HWaddr 00:1b:21:d3:f6:0b
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:231 errors:0 dropped:30 overruns:0 frame:0
TX packets:772 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:17484 (17.4 KB) TX bytes:95288 (95.2 KB)
# ifconfig br0
br0 Link encap:Ethernet HWaddr 92:ee:88:d7:12:40
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Oddly, bond0 does not seem to be a part of br0:
# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.000000000000 no
virbr0 8000.000000000000 yes
Do I need to add "up brctl addif br0 bond0" in my iface definition for
br0? That would defeat the purpose of bridge_ports in the br0 iface
definition.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/889423
Title:
802.3ad bonding not configured correctly
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ifupdown/+bug/889423/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
