I can confirm that applying the fix from comment #46 fixed our Issues
with only 1 Interface of the 2 onboard NICs working after reboot.

We ran into the Problem first after upgrading from Lucid (10.04) to
Oneiric (11.10) aswell as doing a clean install with Oneiric.

Hardware: DL 385 G2 (same as HP DL385 G5)

----------------cut-------------
Dec 12 13:38:12 d01-spi-1 kernel: [    1.651916] bnx2: Broadcom NetXtreme II 
Gigabit Ethernet Driver bnx2 v2.1.6 (Mar 7, 2011)
Dec 12 13:38:12 d01-spi-1 kernel: [    1.651948] bnx2 0000:04:00.0: PCI INT A 
-> GSI 41 (level, low) -> IRQ 41
Dec 12 13:38:12 d01-spi-1 kernel: [    2.135913] bnx2 0000:04:00.0: eth0: 
Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem 
f8000000, IRQ 41, node addr 00:19:bb:ca:6a:88
Dec 12 13:38:12 d01-spi-1 kernel: [    2.136152] bnx2 0000:42:00.0: PCI INT A 
-> GSI 34 (level, low) -> IRQ 34
Dec 12 13:38:12 d01-spi-1 kernel: [   62.944053] bnx2: Can't load firmware file 
"bnx2/bnx2-mips-06-6.2.1.fw"
Dec 12 13:38:12 d01-spi-1 kernel: [   62.944085] bnx2 0000:42:00.0: PCI INT A 
disabled
Dec 12 13:38:12 d01-spi-1 kernel: [   62.944126] bnx2: probe of 0000:42:00.0 
failed with error -2
Dec 12 13:38:13 d01-spi-1 kernel: [   66.367555] bnx2 0000:04:00.0: irq 68 for 
MSI/MSI-X
Dec 12 13:38:13 d01-spi-1 kernel: [   66.477097] bnx2 0000:04:00.0: eth1: using 
MSI
Dec 12 13:38:16 d01-spi-1 kernel: [   69.651513] bnx2 0000:04:00.0: eth1: NIC 
Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
----------------cut-------------

----------------cut-------------
root@d01-spi-1:~# ethtool -i eth0
driver: bnx2
version: 2.1.6
firmware-version: bc 1.9.6
bus-info: 0000:04:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
----------------cut-------------

----------------cut-------------
root@d01-spi-1:~# lspci | grep -i Ethernet
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit 
Ethernet (rev 12)
42:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit 
Ethernet (rev 12)
----------------cut-------------

----------------cut-------------
Linux d01-spi-1 3.0.0-14-server #23-Ubuntu SMP Mon Nov 21 20:49:05 UTC 2011 
x86_64 x86_64 x86_64 GNU/Linux
----------------cut-------------

----------------cut-------------
ii  udev                                            173-0ubuntu4                
                    rule-based device node and kernel event manager
ii  linux-image-server                              3.0.0.14.16                 
                    Linux kernel image on Server Equipment.
----------------cut-------------

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/842560

Title:
  bnx2 firmware missing

To manage notifications about this bug go to:
https://bugs.launchpad.net/oem-priority/+bug/842560/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to