Acer 5750z same issue
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family
6 port SATA AHCI Controller (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Acer Incorporated [ALI] Device 0504
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 40
Region 0: I/O ports at 2088 [size=8]
Region 1: I/O ports at 209c [size=4]
Region 2: I/O ports at 2080 [size=8]
Region 3: I/O ports at 2098 [size=4]
Region 4: I/O ports at 2060 [size=32]
Region 5: Memory at c0608000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4159
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus
Controller (rev 04)
Subsystem: Acer Incorporated [ALI] Device 0504
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 7
Region 0: Memory at c0606000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2040 [size=32]
Kernel modules: i2c-i801
[ 97.695518] ata1.00: exception Emask 0x0 SAct 0x59 SErr 0x0 action 0x0
[ 97.695571] ata1.00: irq_stat 0x40000008
[ 97.695609] ata1.00: failed command: READ FPDMA QUEUED
[ 97.695645] ata1.00: cmd 60/08:30:38:41:2f/00:00:20:00:00/40 tag 6 ncq 4096
in
[ 97.695646] res 41/40:08:38:41:2f/00:00:20:00:00/60 Emask 0x409
(media error) <F>
[ 97.695723] ata1.00: status: { DRDY ERR }
[ 97.695744] ata1.00: error: { UNC }
[ 97.697629] ata1.00: configured for UDMA/100
[ 97.697657] ata1: EH complete
[ 101.612365] ata1.00: exception Emask 0x0 SAct 0x1f SErr 0x0 action 0x0
[ 101.612418] ata1.00: irq_stat 0x40000008
[ 101.612456] ata1.00: failed command: READ FPDMA QUEUED
[ 101.612493] ata1.00: cmd 60/08:00:38:41:2f/00:00:20:00:00/40 tag 0 ncq 4096
in
[ 101.612494] res 41/40:08:38:41:2f/00:00:20:00:00/60 Emask 0x409
(media error) <F>
[ 101.612570] ata1.00: status: { DRDY ERR }
[ 101.612591] ata1.00: error: { UNC }
[ 101.614473] ata1.00: configured for UDMA/100
[ 101.614502] ata1: EH complete
... and so on
And I don't think this should stay in "undecided". This looks scary.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/550559
Title:
hdd problems, failed command: READ FPDMA QUEUED
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/550559/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
