Public bug reported:
I have a problem with watching tv on ps3.
Pinnacle 400e USB on Laptop works fine:
laptop:~$ uname -r
2.6.20-15-generic (feisty 7.04)
laptop:~$ lsmod | grep dvb
dvb_usb_ttusb2 8192 0
dvb_usb 21644 1 dvb_usb_ttusb2
dvb_core 80808 1 dvb_usb
dvb_pll 15364 1 dvb_usb
i2c_core 22784 6 lnbp21,tda826x,tda10086,i2c_ec,dvb_usb,dvb_pll
usbcore 134280 7
usb_storage,libusual,dvb_usb_ttusb2,dvb_usb,ehci_hcd,uhci_hcd
the same Pinnacle 400e USB on PS3 didn't work:
ps3:~$ uname -r
2.6.20-16-powerpc64-smp (feisty 7.04)
ps3:~$ lsmod | grep dvb
dvb_usb_ttusb2 16040 0
dvb_usb 37748 1 dvb_usb_ttusb2
dvb_core 128220 1 dvb_usb
dvb_pll 22668 1 dvb_usb
usbcore 223288 10
dvb_usb_ttusb2,dvb_usb,xpad,hci_usb,usb_storage,libusual,usbhid,ehci_hcd,ohci_hcd
The different is the Modul i2c. The result off „ sudo modprobe
i2c_core“:
FATAL: Module i2c_core not found.
By the way, there is no different to Kernel 2.6.20-15-powerpc64-smp.
When I connect the device everything is o.k.:
ps3:[ 230.594380] usb 3-2.1: new high speed USB device using ps3-ehci-
driver and address
6
ps3:[ 230.686753] usb 3-2.1: configuration #
1 chosen from 1 choice
ps3:[ 230.687050] dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in cold
state, will try t
o load a firmware
ps3:[ 230.884372] dvb-usb: downloading firmware from file 'dvb-usb-
pctv-400e-01.fw'
ps3:[ 231.162410] usb 3-2.1: USB disconnect, address 6
ps3:[ 231.162495] dvb-usb: generic DVB-USB module successfully
deinitialized and disconne
cted.
ps3: [ 232.898514] usb 3-2.1: new high speed USB device using ps3-ehci-
driver and address
7
ps3: [ 232.991104] usb 3-2.1: configuration #1 chosen from 1 choice
ps3: [ 232.991394] dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in
warm state.
ps3: [ 232.992193] dvb-usb: will pass the complete MPEG2 transport
stream to the software
demuxer.
ps3: [ 232.992422] DVB: registering new adapter (Pinnacle 400e DVB-S
USB2.0).
ps3: [ 233.325646] DVB: registering frontend 0 (Philips TDA10086
DVB-S)...
ps3: [ 233.721469] dvb-usb: Pinnacle 400e DVB-S USB2.0 successfully
initialized and connec
ted.
When starting a channel scan (with kaffeine) the system stands (frozen). The
log-messages looks like this:
ps3: [ 1051.862220] ttusb2: there might have been an error during
control message transfer.
(rlen = 4, was 0)
....floods log!!!!!
Can someone pleace help?
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
--
system frozen when starting channel scan (dvb-s) on ppc+ps3
https://bugs.launchpad.net/bugs/117161
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
