** Description changed: I was trying to access my all-in-one Epson EP804AW's scanner through a WiFi network. This does not work out of the box. - I had found instructions for generically enabling scan over WifI for - epson by adding net. 255.255.255.255 # with actual ip number of course - in /etc/sane.d/epson2.conf + I had found instructions for generically enabling scan over WifI for epson by adding, in /etc/sane.d/epson2.conf: + net 255.255.255.255 # using the printer's IP This is INCORRECT for the EP804AW. - It caused Simple Scan and xsane to crash. - It also locked up the EP804AW, which had to be power-cycled and recalibrated + It caused Simple Scan and xsane to crash (hence the sane-backends bug report). + It also locked up the EP804AW, which had to be power-cycled and recalibrated. I found the correct method in this guide: http://edgar.tumblr.com/post/1425668485/scanning-over-wifi-from-an- epson-tx550w-using-ubuntu This procedure could be simplified by installing the avasys "iscan" - packages from jockey. + drivers from jockey. Jockey already provides installation options for avasys's printer - drivers, including USB scanning. + drivers. Please include this in Jockey to improve user experience and prevent possible damage to hardware. ProblemType: Crash DistroRelease: Ubuntu 12.04 Package: sane-utils 1.0.22-7ubuntu1 ProcVersionSignature: Ubuntu 3.2.0-17.26-generic 3.2.6 Uname: Linux 3.2.0-17-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 1.92-0ubuntu1 Architecture: amd64 Date: Fri Feb 24 12:35:43 2012 EcryptfsInUse: Yes ExecutablePath: /usr/bin/scanimage InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) ProcCmdline: scanimage -L SegvAnalysis: - Segfault happened at: 0x7fe5047f07e0: mov 0x8(%rsi),%rax - PC (0x7fe5047f07e0) ok - source "0x8(%rsi)" (0x00000008) not located in a known VMA region (needed readable region)! - destination "%rax" ok + Segfault happened at: 0x7fe5047f07e0: mov 0x8(%rsi),%rax + PC (0x7fe5047f07e0) ok + source "0x8(%rsi)" (0x00000008) not located in a known VMA region (needed readable region)! + destination "%rax" ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: sane-backends StacktraceTop: - ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 - ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 - ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 - ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 - ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 + ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 + ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 + ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 + ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 + ?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3 Title: scanimage crashed with SIGSEGV UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare mtime.conffile..etc.default.saned: 2012-02-14T15:31:24.882599
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/940063 Title: Add "iscan" configuration to Jockey To manage notifications about this bug go to: https://bugs.launchpad.net/jockey/+bug/940063/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
