Interestingly, while it failed in 3.2.0 (that's what the above patch is against) the motherboard boots out of the box with 3.3-rc6. There's a new DMESG error however on the first and subsequent resumes:
[ 695.000381] Enabling non-boot CPUs ... [ 695.000381] Booting Node 0 Processor 1 APIC 0x1 [ 695.000381] smpboot cpu 1: start_ip = 9a000 [ 694.690076] Calibrating delay loop (skipped) already calibrated this CPU [ 694.690076] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu [ 694.690076] perf: IBS APIC setup failed on cpu #1 [ 695.031768] NMI watchdog enabled, takes one hw-pmu counter. [ 695.031828] Switch to broadcast mode on CPU1 [ 695.031941] CPU1 is up which repeats for CPUs 2 & 3. Full DMESG attached. Searching LKML reveals that Robert Richter from AMD has written a bunch of driver code in this area, but this error appears to be more than the expected AMD "bug" notices for this chipset family. Still, the system is operating normally and suspends/resumes OK. ** Attachment added: "dmesg-3.3rc6.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/658955/+attachment/2855323/+files/dmesg-3.3rc6.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/658955 Title: Natty fails to boot on Gigabyte GA-MA78GPM-UD2H To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/658955/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
