Private bug reported:
Build Version/Date: linux-
image-3.2.0-1600-armadaxp_3.2.0-1600.1ppa1_armhf.deb
Environment used for testing: armadaxp2
Summary: armadaxp test kernel fails to boot
Steps to Reproduce: attempt to boot the kernel
Expected result: kernel boots to completion
Actual result: kernel hangs before completing boot
***
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-1600-armadaxp (buildd@iara) (gcc version
4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu3) ) #1ppa1-Ubuntu SMP Mon Mar 12 15:06:46
UTC 2012 (Ubuntu 3.2.0-1600.1ppa1-armadaxp 3.2.9)
[ 0.000000] CPU: Marvell - PJ4Bv7 Processor [562f5842] revision 2 (ARMv7),
cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: Marvell Armada XP Development Board
[ 0.000000] Using UBoot passing parameters structure
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] SMP: init cpus
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c2b6d000 s11168 r8192 d13408 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 780288
[ 0.000000] Kernel command line: console=ttyS0,115200 pm_disable pm_disable
pm_disable root=/dev/sda3 rw profile=1 earlyprintk=ttyS0,115200
[ 0.000000] kernel profiling enabled (shift: 1)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 12582912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Memory: 3072MB = 3072MB total
[ 0.000000] Memory: 3093340k/3093340k available, 52388k reserved, 2318336K
highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf3000000 - 0xfa800000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf2800000 ( 808 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0a4ad90 (10508 kB)
[ 0.000000] .init : 0xc0a4b000 - 0xc0ab5ba0 ( 427 kB)
[ 0.000000] .data : 0xc0ab6000 - 0xc0b0bca8 ( 344 kB)
[ 0.000000] .bss : 0xc0b0bccc - 0xc0bd5e74 ( 809 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:211 nr_irqs:211 211
[ 0.000000] Initializing ArmadaXP SOC Timer 0
[ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every
171798ms
[ 0.000000] Console: colour dummy device 80x30
[ 102.452768] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 102.548429] pid_max: default: 32768 minimum: 301
[ 102.553244] Security Framework initialized
[ 102.557455] AppArmor: AppArmor initialized
[ 102.561621] Yama: becoming mindful.
[ 102.565357] Mount-cache hash table entries: 512
[ 102.570492] Initializing cgroup subsys cpuacct
[ 102.575028] Initializing cgroup subsys memory
[ 102.579508] Initializing cgroup subsys devices
[ 102.584021] Initializing cgroup subsys freezer
[ 102.588545] Initializing cgroup subsys net_cls
[ 102.593056] Initializing cgroup subsys blkio
[ 102.597490] CPU: Testing write buffer coherency: ok
[ 102.602476] ftrace: allocating 30749 entries in 91 pages
[ 102.624164] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 102.629917] SMP: prepare CPUs (4 cores)
[ 102.634347] SMP: CPU 0 Waking up CPU 1
[ 102.638198] SMP: CPU 0 Waking up CPU 2
[ 102.642015] SMP: CPU 0 Waking up CPU 3
[ 102.645873] Setting up static identity map for 0x71a960 - 0x71a994
[ 102.663469] CPU1: Booted secondary processor
[ 102.695556] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 102.705736] CPU2: Booted secondary processor
[ 102.745556] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 102.754907] CPU3: Booted secondary processor
[ 102.785556] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 102.785628] Brought up 4 CPUs
[ 102.818800] SMP: Total of 4 processors activated (5328.07 BogoMIPS).
[ 102.826248] devtmpfs: initialized
[ 102.834583] xor: measuring software checksum speed
[ 102.885524] arm4regs : 1086.800 MB/sec
[ 102.935521] 8regs : 956.800 MB/sec
[ 102.985520] 32regs : 1227.600 MB/sec
[ 102.989772] xor: using function: 32regs (1227.600 MB/sec)
[ 102.995544] print_constraints: dummy:
[ 102.999648] NET: Registered protocol family 16
[ 103.004658] Aurora: Working in ARMv7 mode
[ 103.008772] L0 cache Enabled
[ 103.011727] Speculative Prefetch Disabled
[ 103.015834] Aurora L2 Cache Enabled
[ 103.019713] Support IO coherency.
[ 103.056199] skipping Serdes configuration phase, assume bootloader did this
work already !!!
[ 103.167762]
[ 103.169332] Marvell Armada-XP DB-78460-BP rev 2.0 Board - Soc: MV78460 A0
LE
[ 103.176744] Detected Tclk 250000000, SysClk 667000000, FabricClk
667000000, PClk 1333000000
[ 103.185316] LSP version: AXP_3.0.0-rc1
[ 103.189311]
[ 103.191924] registered dev#0 asa ehci_marvell
[ 103.196672] Marvell USB EHCI Host controller #0: f2168e00
[ 103.202188] registered dev#1 asa ehci_marvell
[ 103.206928] Marvell USB EHCI Host controller #1: f2168c00
[ 103.212440] registered dev#2 asa mv_udc
[ 103.216661] Marvell USB Gadget controller #2: f2168a00
[ 103.221914] PCI-E: Cheking physical bus #0 (controller #0): Enabled - No Link
[ 103.230311] PCI-E: Cheking physical bus #1 (controller #1): Enabled - No Link
[ 103.238691] PCI-E: Cheking physical bus #2 (controller #2): Enabled - No Link
[ 103.247069] PCI-E: Cheking physical bus #3 (controller #3): Enabled - No Link
[ 103.255441] PCI-E: Cheking physical bus #4 (controller #8): Enabled - No Link
[ 103.263818] PCI-E: Cheking physical bus #5 (controller #9): Enabled - No Link
[ 103.276580] Trying to unpack rootfs image as initramfs...
[ 103.283156] bio: create slab <bio-0> at 0
[ 103.375994] Freeing initrd memory: 2408K
[ 103.455662] raid6: int32x1 151 MB/s
[ 103.625743] raid6: int32x2 235 MB/s
[ 103.795728] raid6: int32x4 221 MB/s
[ 103.965710] raid6: int32x8 258 MB/s
[ 103.969528] raid6: using algorithm int32x8 (258 MB/s)
[ 103.975153] vgaarb: loaded
[ 103.978776] SCSI subsystem initialized
[ 103.982932] usbcore: registered new interface driver usbfs
[ 103.988543] usbcore: registered new interface driver hub
[ 103.994022] usbcore: registered new device driver usb
[ 103.999591] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 104.006360] NetLabel: Initializing
[ 104.009833] NetLabel: domain hash size = 128
[ 104.014255] NetLabel: protocols = UNLABELED CIPSOv4
[ 104.019323] NetLabel: unlabeled traffic allowed by default
[ 104.025130] Switching to clocksource axp_clocksource
[ 104.048420] FS-Cache: Loaded
[ 104.051567] AppArmor: AppArmor Filesystem Enabled
[ 104.065227] NET: Registered protocol family 2
[ 104.069931] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 104.078059] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 104.086530] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 104.093673] TCP: Hash tables configured (established 131072 bind 65536)
[ 104.100358] TCP reno registered
[ 104.103576] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 104.109591] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 104.116273] NET: Registered protocol family 1
[ 104.121061] RPC: Registered named UNIX socket transport module.
[ 104.127042] RPC: Registered udp transport module.
[ 104.131826] RPC: Registered tcp transport module.
[ 104.136595] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 104.143134] CESA test started: bufNum = 1, bufSize = 20000
[ 104.148732] Cesa Test Start: pMbufSrc=f2282000, pFragsSrc=f229e000,
pMbufDst=f2289800, pFragsDst=f22a4000
[ 104.164456] mvCesaInit: channels=2, session=32, queue=256
[ 104.187997] cesadev_init(c0a541f8)
[ 104.191785] Armada XP hwmon thermal sensor initialized.
[ 104.197107] ArmadaXP Power Managament Suspend Operations Initialized
[ 104.203536] Initializing Armada-XP CPU power management (SNOOZE)
[ 104.210219] audit: initializing netlink socket (disabled)
[ 104.215704] type=2000 audit(1.750:1): initialized
[ 104.337695] highmem bounce pool size: 64 pages
[ 104.342705] VFS: Disk quotas dquot_6.5.2
[ 104.346868] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 104.354533] FS-Cache: Netfs 'nfs' registered for caching
[ 104.360244] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 104.366558] fuse init (API version 7.17)
[ 104.370734] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 104.381166] SGI XFS Quota Management subsystem
[ 104.385698] msgmni has been set to 1518
[ 104.390918] async_tx: api initialized (async)
[ 104.395413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 104.402988] io scheduler noop registered
[ 104.406980] io scheduler deadline registered
[ 104.411383] io scheduler cfq registered (default)
[ 104.416345] Initializing ths8200_init
[ 104.423822] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 105.070348] dw-apb-uart dw-apb-uart.0: no clock-frequency property set
[ 105.076943] dw-apb-uart: probe of dw-apb-uart.0 failed with error -22
[ 105.083697] [drm] Initialized drm 1.1.0 20060810
[ 105.088848] brd: module loaded
[ 105.095110] loop: module loaded
[ 105.098920] sata_mv sata_mv.0: cannot get clkdev
[ 105.103701] sata_mv sata_mv.0: slots 32 ports 2
[ 105.109328] scsi0 : sata_mv
[ 105.112509] scsi1 : sata_mv
[ 105.115541] ata1: SATA max UDMA/133 irq 55
[ 105.119707] ata2: SATA max UDMA/133 irq 55
[ 105.124424]
[ 105.124427] INFO: Found cfi_flash_0 0 - base 0xf2000000, size 0x2000000, bus
2
[ 105.133035] INFO: Found spi_flash 0 - base 0xf0000000, size 0x1000000
[ 105.139542] INFO: flashInfoFill - Found 2 Flash Devices
[ 105.144852] INFO: flash_map_init - detected 2 devices
[ 105.150249] MTD: Initialize the cfi_flash_0 device at address 0xf2000000
[ 105.157380]
[ 105.157383] INFO: Io remapped successfully - phy addr = 0xf2000000, virt
addr = 0xf5000000
[ 105.167017] INFO: Using cfi_probe to probe cfi_flash_0 at address
0xf2000000, size 0x2000000, width 2m
[ 105.176444] cfi_flash_0: Found 1 x16 devices at 0x0 in 16-bit bank.
Manufacturer ID 0x000089 Chip ID 0x000018
[ 105.186702] Intel/Sharp Extended Query Table at 0x0031
[ 105.191922] Intel/Sharp Extended Query Table at 0x0031
[ 105.197133] Using buffer write method
[ 105.200873] cfi_cmdset_0001: Erase suspend on write enabled
[ 105.206521] - detected OK - OK.
[ 105.214837] MTD: Initialize the spi_flash device at address 0xf0000000
[ 105.221624]
[ 105.221627] INFO: Io remapped successfully - phy addr = 0xf0000000, virt
addr = 0xf8000000
[ 105.231259] INFO: Using sflash to probe spi_flash at address 0xf0000000,
size 0x1000000, width 2m - Not detected - FAILED!
[ 105.246161] mv_eth_probe: portMask = f cpuMask=f
[ 105.251105] 0 - Base 0x00000000 , Size = 0x80000000.
[ 105.256134] 2 - Base 0x80000000 , Size = 0x40000000.
[ 105.261172] 4 - Base 0xf4000000 , Size = 0x00100000.
[ 105.266200] 8 - Base 0xe0000000 , Size = 0x02000000.
[ 105.271237] 10 - Base 0xe2000000 , Size = 0x02000000.
[ 105.276352] 12 - Base 0xe4000000 , Size = 0x02000000.
[ 105.281474] 14 - Base 0xe6000000 , Size = 0x02000000.
[ 105.286588] 16 - Base 0xe8000000 , Size = 0x02000000.
[ 105.291712] 20 - Base 0xea000000 , Size = 0x02000000.
[ 105.296827] 24 - Base 0xec000000 , Size = 0x02000000.
[ 105.301949] 26 - Base 0xee000000 , Size = 0x02000000.
[ 105.307064] 28 - Base 0xd0000000 , Size = 0x00100000.
[ 105.312186] 30 - Base 0xf0000000 , Size = 0x01000000.
[ 105.317300] 38 - Base 0xfff00000 , Size = 0x00100000.
[ 105.322422] 39 - Base 0xf2000000 , Size = 0x02000000.
[ 105.327537] 41 - Base 0xc8010000 , Size = 0x00010000.
[ 105.332664] 42 - Base 0xf4480000 , Size = 0x00010000.
[ 105.337779] 43 - Base 0xf4500000 , Size = 0x00100000.
[ 105.342927] o 4 Giga ports supported
[ 105.346744] o SKB recycle supported (Enabled)
[ 105.351348] o NETA acceleration mode 1
[ 105.355339] o RX Queue support: 8 Queues * 128 Descriptors
[ 105.361066] o TX Queue support: 8 Queues * 532 Descriptors
[ 105.366785] o GSO supported
[ 105.369823] o GRO supported
[ 105.372869] o Receive checksum offload supported
[ 105.377724] o Transmit checksum offload supported
[ 105.382671] o Driver ERROR statistics enabled
[ 105.387265]
[ 105.388944] o Loading network interface(s)
[ 105.393299]
[ 105.394868] o Port 0 is connected to Linux netdevice
[ 105.400171] giga p=0: mtu=1500, mac=f20a3e36
[ 105.409093] o eth0, ifindex = 2, GbE port = 0
[ 105.413893]
[ 105.415464] o Port 1 is connected to Linux netdevice
[ 105.420769] giga p=1: mtu=1500, mac=f20a3e36
[ 105.429697] o eth1, ifindex = 3, GbE port = 1
[ 105.434495]
[ 105.436066] o Port 2 is connected to Linux netdevice
[ 105.441369] giga p=2: mtu=1500, mac=f20a3e36
[ 105.450350] o eth2, ifindex = 4, GbE port = 2
[ 105.455134]
[ 105.456703] o Port 3 is connected to Linux netdevice
[ 105.462014] giga p=3: mtu=1500, mac=f20a3e36
[ 105.471049] o eth3, ifindex = 5, GbE port = 3
[ 105.475831]
[ 105.478584] Fixed MDIO Bus: probed
[ 105.482071] tun: Universal TUN/TAP device driver, 1.6
[ 105.487186] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 105.493561] PPP generic driver version 2.4.2
[ 105.498024] NET: Registered protocol family 24
[ 105.502643] usbcore: registered new interface driver smsc95xx
[ 105.508652] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 105.515345] ehci_marvell ehci_marvell.0: Marvell Orion EHCI
[ 105.521145] ehci_marvell ehci_marvell.0: new USB bus registered, assigned
bus number 1
[ 105.550227] ehci_marvell ehci_marvell.0: irq 45, io base 0xfbb50100
[ 105.570217] ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00
[ 105.576669] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 105.583535] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 105.590824] usb usb1: Product: Marvell Orion EHCI
[ 105.595594] usb usb1: Manufacturer: Linux 3.2.0-1600-armadaxp ehci_hcd
[ 105.602188] usb usb1: SerialNumber: ehci_marvell.0
[ 105.607475] hub 1-0:1.0: USB hub found
[ 105.611322] hub 1-0:1.0: 1 port detected
[ 105.615672] ehci_marvell ehci_marvell.1: Marvell Orion EHCI
[ 105.621475] ehci_marvell ehci_marvell.1: new USB bus registered, assigned
bus number 2
[ 105.650224] ehci_marvell ehci_marvell.1: irq 46, io base 0xfbb51100
[ 105.670215] ehci_marvell ehci_marvell.1: USB 2.0 started, EHCI 1.00
[ 105.676645] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 105.683504] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 105.690792] usb usb2: Product: Marvell Orion EHCI
[ 105.695562] usb usb2: Manufacturer: Linux 3.2.0-1600-armadaxp ehci_hcd
[ 105.702158] usb usb2: SerialNumber: ehci_marvell.1
[ 105.707430] hub 2-0:1.0: USB hub found
[ 105.710266] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 105.717596] hub 2-0:1.0: 1 port detected
[ 105.722059] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 105.728488] usbcore: registered new interface driver usblp
[ 105.734051] Initializing USB Mass Storage driver...
[ 105.739079] usbcore: registered new interface driver usb-storage
[ 105.745160] USB Mass Storage support registered.
[ 105.749883] usbcore: registered new interface driver ums-datafab
[ 105.750310] ata1.00: ATA-8: Hitachi HTS725032A9A364, PC3OCA0B, max UDMA/133
[ 105.750323] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 105.769755] usbcore: registered new interface driver ums-freecom
[ 105.775867] usbcore: registered new interface driver ums-jumpshot
[ 105.782072] usbcore: registered new interface driver ums-sddr09
[ 105.788087] usbcore: registered new interface driver ums-sddr55
[ 105.794377] mousedev: PS/2 mouse device common for all mice
[ 105.800561] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[ 105.806537] i2c /dev entries driver
[ 105.810272] ata1.00: configured for UDMA/133
[ 105.810589] Linux media interface: v0.10
[ 105.810656] Linux video capture interface: v2.00
[ 105.816440] md: linear personality registered for level -1
[ 105.816451] md: raid0 personality registered for level 0
[ 105.816461] md: raid1 personality registered for level 1
[ 105.816471] md: raid10 personality registered for level 10
[ 105.816481] md: raid6 personality registered for level 6
[ 105.816491] md: raid5 personality registered for level 5
[ 105.816501] md: raid4 personality registered for level 4
[ 105.861284] device-mapper: uevent: version 1.0.3
[ 105.861768] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72503 PC3O
PQ: 0 ANSI: 5
[ 105.862539] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298
GiB)
[ 105.862955] sd 0:0:0:0: [sda] Write Protect is off
[ 105.863141] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 105.895768] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-de...@redhat.com
[ 105.904609] cpuidle: using governor ladder
[ 105.909305] cpuidle: using governor menu
[ 105.914490] mmc0: mvsdio driver initialized, lacking card detect (fall back
to polling)
[ 105.923266] usbcore: registered new interface driver usbhid
[ 105.928899] usbhid: USB HID core driver
[ 105.933198] ALSA device list:
[ 105.936248] No soundcards found.
[ 105.939896] aufs 3.2-20120109
[ 105.942951] oprofile: hardware counters not available
[ 105.948068] oprofile: using timer interrupt.
[ 105.952502] u32 classifier
[ 105.955293] Actions configured
[ 105.958778] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 105.968007] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 105.973449] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 105.973489] TCP cubic registered
[ 105.982677] NET: Registered protocol family 10
[ 105.988039] sd 0:0:0:0: [sda] Attached SCSI disk
[ 105.998793] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 106.004432] IPv6 over IPv4 tunneling driver
[ 106.011887] NET: Registered protocol family 17
[ 106.016649] Bridge firewalling registered
[ 106.020839] 8021q: 802.1Q VLAN Support v1.8
[ 106.025115] lib80211: common routines for IEEE802.11 drivers
[ 106.030892] Registering the dns_resolver key type
[ 106.035699] VFP support v0.3: implementor 56 architecture 2 part 20 variant
9 rev 6
[ 106.043478] turn off boot console earlycon0
** Affects: eilt
Importance: Undecided
Assignee: Bryan Wu (cooloney)
Status: New
** Package changed: ubuntu => eilt
** Visibility changed to: Private
** Changed in: eilt
Assignee: (unassigned) => Bryan Wu (cooloney)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/954082
Title:
armadaxp test kernel fails to boot
To manage notifications about this bug go to:
https://bugs.launchpad.net/eilt/+bug/954082/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
