Hi Brian, Here are a dmesg before and a dmesg after the mouse wheel up event. But unfortunately as you see here, you won't find any difference too. -Tom.
Brian Murray wrote: > Did you grab 'dmesg' after experiencing the event? I ask because I > don't see anything odd in the kernel messages. > -- [EMAIL PROTECTED] www.thomasbrenneur.com [ 0.000000] Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed May 23 01:46:23 UTC 2007 (Ubuntu 2.6.20-16.28-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001def0000 end: 000000001dff0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000001dff0000 size: 0000000000003000 end: 000000001dff3000 type: 4 [ 0.000000] copy_e820_map() start: 000000001dff3000 size: 000000000000d000 end: 000000001e000000 type: 3 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001dff0000 (usable) [ 0.000000] BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 479MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4c60 [ 0.000000] Entering add_active_range(0, 0, 122864) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 122864 [ 0.000000] HighMem 122864 -> 122864 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 122864 [ 0.000000] On node 0 totalpages: 122864 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 927 pages used for memmap [ 0.000000] Normal zone: 117841 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 GBT ) @ 0x000f65e0 [ 0.000000] ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1dff3000 [ 0.000000] ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1dff3040 [ 0.000000] ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1dff7200 [ 0.000000] ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e0c00000) [ 0.000000] Detected 1915.268 MHz processor. [ 16.662404] Built 1 zonelists. Total pages: 121905 [ 16.662408] Kernel command line: root=UUID=e5bc1329-5943-4104-8bda-fff27cf57145 ro quiet splash [ 16.662582] mapped APIC to ffffd000 (fee00000) [ 16.662584] mapped IOAPIC to ffffc000 (fec00000) [ 16.662588] Enabling fast FPU save and restore... done. [ 16.662591] Enabling unmasked SIMD FPU exception support... done. [ 16.662603] Initializing CPU#0 [ 16.662682] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 16.663862] Console: colour VGA+ 80x25 [ 16.664352] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 16.664689] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 16.679592] Memory: 476216k/491456k available (1992k kernel code, 14712k reserved, 896k data, 328k init, 0k highmem) [ 16.679603] virtual kernel memory layout: [ 16.679604] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 16.679606] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 16.679607] vmalloc : 0xde800000 - 0xff7fe000 ( 527 MB) [ 16.679608] lowmem : 0xc0000000 - 0xddff0000 ( 479 MB) [ 16.679610] .init : 0xc03d9000 - 0xc042b000 ( 328 kB) [ 16.679611] .data : 0xc02f2354 - 0xc03d26d4 ( 896 kB) [ 16.679612] .text : 0xc0100000 - 0xc02f2354 (1992 kB) [ 16.679616] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 16.758576] Calibrating delay using timer specific routine.. 3834.27 BogoMIPS (lpj=7668540) [ 16.758626] Security Framework v1.0.0 initialized [ 16.758634] SELinux: Disabled at boot. [ 16.758653] Mount-cache hash table entries: 512 [ 16.758826] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [ 16.758836] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.758839] CPU: L2 Cache: 512K (64 bytes/line) [ 16.758842] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 [ 16.758853] Compat vDSO mapped to ffffe000. [ 16.758859] Remapping vsyscall page to ffffe000 [ 16.758870] Checking 'hlt' instruction... OK. [ 16.774699] SMP alternatives: switching to UP code [ 16.774958] Freeing SMP alternatives: 11k freed [ 16.775202] Early unpacking initramfs... done [ 17.093825] ACPI: Core revision 20060707 [ 17.097562] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 17.267999] CPU0: AMD Athlon(tm) XP 2600+ stepping 00 [ 17.268027] Total of 1 processors activated (3834.27 BogoMIPS). [ 17.268772] ENABLING IO-APIC IRQs [ 17.269076] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 17.413861] Brought up 1 CPUs [ 17.414153] Booting paravirtualized kernel on bare hardware [ 17.414256] Time: 17:43:09 Date: 05/06/107 [ 17.414295] NET: Registered protocol family 16 [ 17.414413] EISA bus registered [ 17.414418] ACPI: bus type pci registered [ 17.421786] PCI: PCI BIOS revision 2.10 entry at 0xfa4a0, last bus=1 [ 17.421788] PCI: Using configuration type 1 [ 17.421790] Setting up standard PCI resources [ 17.429862] ACPI: Interpreter enabled [ 17.429870] ACPI: Using IOAPIC for interrupt routing [ 17.430499] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.430505] PCI: Probing PCI hardware (bus 00) [ 17.431304] Boot video device is 0000:01:00.0 [ 17.431346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.457467] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 17.457801] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 17.458124] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 17.458428] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.458838] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. [ 17.459231] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. [ 17.459652] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. [ 17.460055] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. [ 17.463069] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.463080] pnp: PnP ACPI init [ 17.467518] pnp: PnP ACPI: found 16 devices [ 17.467523] PnPBIOS: Disabled by ACPI PNP [ 17.467585] PCI: Using ACPI for IRQ routing [ 17.467588] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.489987] NET: Registered protocol family 8 [ 17.489989] NET: Registered protocol family 20 [ 17.490337] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved [ 17.490341] pnp: 00:02: ioport range 0x40f0-0x40ff could not be reserved [ 17.490344] pnp: 00:02: ioport range 0x5000-0x500f has been reserved [ 17.490622] PCI: Bridge: 0000:00:01.0 [ 17.490624] IO window: disabled. [ 17.490629] MEM window: dc000000-ddffffff [ 17.490633] PREFETCH window: d8000000-dbffffff [ 17.490649] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 17.490680] NET: Registered protocol family 2 [ 17.529787] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 17.529894] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 17.530148] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 17.530267] TCP: Hash tables configured (established 16384 bind 8192) [ 17.530270] TCP reno registered [ 17.541791] checking if image is initramfs... it is [ 18.141396] Freeing initrd memory: 6774k freed [ 18.141939] audit: initializing netlink socket (disabled) [ 18.141956] audit(1181151789.396:1): initialized [ 18.142082] VFS: Disk quotas dquot_6.5.1 [ 18.142103] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 18.142157] io scheduler noop registered [ 18.142160] io scheduler anticipatory registered [ 18.142163] io scheduler deadline registered [ 18.142170] io scheduler cfq registered (default) [ 18.142240] PCI: Bypassing VIA 8237 APIC De-Assert Message [ 18.142473] isapnp: Scanning for PnP cards... [ 18.495886] isapnp: No Plug & Play device found [ 18.521976] Real Time Clock Driver v1.12ac [ 18.522037] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.522161] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.522318] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.522880] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.523113] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.523364] mice: PS/2 mouse device common for all mice [ 18.524025] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.524302] input: Macintosh mouse button emulation as /class/input/input0 [ 18.524340] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 18.524345] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 18.524649] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 18.525017] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.525022] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.525159] EISA: Probing bus 0 at eisa.0 [ 18.525183] Cannot allocate resource for EISA slot 4 [ 18.525186] Cannot allocate resource for EISA slot 5 [ 18.525199] EISA: Detected 0 cards. [ 18.555374] TCP cubic registered [ 18.555382] NET: Registered protocol family 1 [ 18.555406] Using IPI No-Shortcut mode [ 18.555482] ACPI: (supports S0 S1 S4 S5) [ 18.555534] Magic number: 11:935:743 [ 18.556199] Freeing unused kernel memory: 328k freed [ 18.556470] Time: tsc clocksource has been installed. [ 18.568732] input: AT Translated Set 2 keyboard as /class/input/input1 [ 19.785339] Capability LSM initialized [ 20.327136] SCSI subsystem initialized [ 20.332426] libata version 2.20 loaded. [ 20.333742] sata_via 0000:00:0f.0: version 2.1 [ 20.334184] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 20.334187] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 20.334198] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 20.334222] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 20.334303] ata1: SATA max UDMA/133 cmd 0x00019000 ctl 0x00019402 bmdma 0x0001a000 irq 16 [ 20.334345] ata2: SATA max UDMA/133 cmd 0x00019800 ctl 0x00019c02 bmdma 0x0001a008 irq 16 [ 20.334363] scsi0 : sata_via [ 20.363490] usbcore: registered new interface driver usbfs [ 20.363522] usbcore: registered new interface driver hub [ 20.363552] usbcore: registered new device driver usb [ 20.422393] USB Universal Host Controller Interface driver v3.0 [ 20.436172] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 20.512226] ieee1394: Initialized config rom entry `ip1394' [ 20.532039] Floppy drive(s): fd0 is 1.44M [ 20.538166] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 20.548583] ATA: abnormal status 0x7F on port 0x00019007 [ 20.548612] scsi1 : sata_via [ 20.598889] FDC 0 is a post-1991 82077 [ 20.753891] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 20.764307] ATA: abnormal status 0x7F on port 0x00019807 [ 20.766109] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [ 20.766114] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 20.766124] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 20.766138] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 20.766330] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 20.766364] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000ac00 [ 20.766517] usb usb1: configuration #1 chosen from 1 choice [ 20.766547] hub 1-0:1.0: USB hub found [ 20.766558] hub 1-0:1.0: 2 ports detected [ 20.873928] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 20.873945] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 20.873973] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 20.873999] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000b000 [ 20.874102] usb usb2: configuration #1 chosen from 1 choice [ 20.874129] hub 2-0:1.0: USB hub found [ 20.874137] hub 2-0:1.0: 2 ports detected [ 20.981775] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 20.981793] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 20.981819] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 20.981845] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000b400 [ 20.981948] usb usb3: configuration #1 chosen from 1 choice [ 20.981977] hub 3-0:1.0: USB hub found [ 20.981988] hub 3-0:1.0: 2 ports detected [ 21.089652] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 21.089669] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 21.089701] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 21.089727] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000b800 [ 21.089825] usb usb4: configuration #1 chosen from 1 choice [ 21.089855] hub 4-0:1.0: USB hub found [ 21.089867] hub 4-0:1.0: 2 ports detected [ 21.197608] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 21.197614] 8139cp 0000:00:13.0: Try the "8139too" driver instead. [ 21.199299] 8139too Fast Ethernet driver 0.9.28 [ 21.199349] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 21.199623] eth0: RealTek RTL8139 at 0xde846000, 00:0d:61:68:73:c4, IRQ 18 [ 21.199626] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 21.199723] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 21.199734] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 21.199766] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 21.199817] ehci_hcd 0000:00:10.4: irq 17, io mem 0xde006000 [ 21.199824] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.199923] usb usb5: configuration #1 chosen from 1 choice [ 21.199955] hub 5-0:1.0: USB hub found [ 21.199967] hub 5-0:1.0: 8 ports detected [ 21.305492] ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 17 (level, low) -> IRQ 19 [ 21.355399] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[de005000-de0057ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 21.355551] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [ 21.355568] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 21.355580] VP_IDE: chipset revision 6 [ 21.355582] VP_IDE: not 100% native mode: will probe irqs later [ 21.355593] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 21.355602] ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA [ 21.355614] ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:pio [ 21.355624] Probing IDE interface ide0... [ 21.792752] hda: WDC WD800JB-00FMA0, ATA DISK drive [ 22.080421] hdb: Maxtor 90288D2, ATA DISK drive [ 22.140626] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 22.617183] Probing IDE interface ide1... [ 22.631860] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d61000061df60] [ 23.498744] hdc: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive [ 23.843704] ide1 at 0x170-0x177,0x376 on irq 15 [ 23.856818] hda: max request size: 128KiB [ 23.870705] hda: Host Protected Area detected. [ 23.870708] current capacity is 156299375 sectors (80025 MB) [ 23.870710] native capacity is 156301488 sectors (80026 MB) [ 23.871659] hda: Host Protected Area disabled. [ 23.871664] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 23.871774] hda: cache flushes supported [ 23.871836] hda: hda1 hda2 < hda5 hda6 > [ 23.899283] hdb: max request size: 128KiB [ 23.899363] hdb: 5627664 sectors (2881 MB) w/256KiB Cache, CHS=5583/16/63, UDMA(33) [ 23.899369] hdb: cache flushes not supported [ 23.899403] hdb: hdb1 [ 23.935803] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 23.935815] Uniform CD-ROM driver Revision: 3.20 [ 24.296069] Attempting manual resume [ 24.296074] swsusp: Resume From Partition 3:5 [ 24.296076] PM: Checking swsusp image. [ 24.296262] PM: Resume from disk failed. [ 24.333645] kjournald starting. Commit interval 5 seconds [ 24.333660] EXT3-fs: mounted filesystem with ordered data mode. [ 31.488140] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 32.813400] NET: Registered protocol family 17 [ 33.422496] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.424342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 33.856581] Linux agpgart interface v0.102 (c) Dave Jones [ 34.165869] agpgart: Detected VIA KM400/KM400A chipset [ 34.173955] agpgart: AGP aperture is 128M @ 0xd0000000 [ 34.383921] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 [ 34.450852] input: PC Speaker as /class/input/input3 [ 34.489803] parport: PnPBIOS parport detected. [ 34.489851] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 35.024940] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 35.024946] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 35.024956] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20 [ 35.025106] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 35.663390] fuse init (API version 7.8) [ 35.699515] lp0: using parport0 (interrupt-driven). [ 35.753522] Adding 506008k swap on /dev/disk/by-uuid/8e331965-c1a4-4cde-badb-111e319c6469. Priority:-1 extents:1 across:506008k [ 35.945929] EXT3 FS on hda1, internal journal [ 36.886454] NET: Registered protocol family 10 [ 36.886564] lo: Disabled Privacy Extensions [ 37.443306] eth0: link down [ 38.979290] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 47.206757] eth0: no IPv6 routers present [ 95.999397] kjournald starting. Commit interval 5 seconds [ 95.999645] EXT3 FS on hda6, internal journal [ 95.999651] EXT3-fs: mounted filesystem with ordered data mode. [ 102.503941] input: Power Button (FF) as /class/input/input4 [ 102.509219] ACPI: Power Button (FF) [PWRF] [ 102.549077] input: Power Button (CM) as /class/input/input5 [ 102.554334] ACPI: Power Button (CM) [PWRB] [ 102.612749] Using specific hotkey driver [ 102.643563] No dock devices found. [ 102.679660] ibm_acpi: ec object not found [ 102.763400] pcc_acpi: loading... [ 105.654852] [drm] Initialized drm 1.1.0 20060810 [ 105.776164] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 [ 105.779664] [drm] Initialized via 2.11.0 20061227 on minor 0 [ 105.875668] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 105.876016] agpgart: Device is in legacy mode, falling back to 2.x [ 105.876231] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 105.876493] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 105.881532] [drm:via_mem_alloc] *ERROR* Attempt to allocate from uninitialized memory manager. [ 106.162501] ppdev: user-space parallel port driver [ 109.304827] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 109.304834] apm: overridden by ACPI. [ 109.541375] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). [ 109.727885] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 109.728425] NFSD: starting 90-second grace period [ 111.027869] vmmon: module license 'unspecified' taints kernel. [ 111.036651] /dev/vmmon[5385]: Module vmmon: registered with major=10 minor=165 [ 111.037119] /dev/vmmon[5385]: Module vmmon: initialized [ 111.139177] /dev/vmnet: open called by PID 5411 (vmnet-bridge) [ 111.139609] /dev/vmnet: hub 0 does not exist, allocating memory. [ 111.139840] /dev/vmnet: port on hub 0 successfully opened [ 111.140103] bridge-eth0: enabling the bridge [ 111.140295] bridge-eth0: up [ 111.140458] bridge-eth0: already up [ 111.140634] bridge-eth0: attached [ 111.181514] /dev/vmnet: open called by PID 5425 (vmnet-natd) [ 111.181866] /dev/vmnet: hub 8 does not exist, allocating memory. [ 111.182098] /dev/vmnet: port on hub 8 successfully opened [ 111.537174] Bluetooth: Core ver 2.11 [ 111.537263] NET: Registered protocol family 31 [ 111.537265] Bluetooth: HCI device and connection manager initialized [ 111.537270] Bluetooth: HCI socket layer initialized [ 111.565553] Bluetooth: L2CAP ver 2.8 [ 111.565559] Bluetooth: L2CAP socket layer initialized [ 111.752164] Bluetooth: RFCOMM socket layer initialized [ 111.752184] Bluetooth: RFCOMM TTY layer initialized [ 111.752186] Bluetooth: RFCOMM ver 1.8 [ 112.243943] /dev/vmnet: open called by PID 5543 (vmnet-netifup) [ 112.244298] /dev/vmnet: hub 1 does not exist, allocating memory. [ 112.244529] /dev/vmnet: port on hub 1 successfully opened [ 112.248570] /dev/vmnet: open called by PID 5544 (vmnet-netifup) [ 112.248925] /dev/vmnet: port on hub 8 successfully opened [ 112.744192] /dev/vmnet: open called by PID 5557 (vmnet-dhcpd) [ 112.744477] /dev/vmnet: port on hub 8 successfully opened [ 112.751167] /dev/vmnet: open called by PID 5582 (vmnet-dhcpd) [ 112.751445] /dev/vmnet: port on hub 1 successfully opened [ 120.744237] eth0: no IPv6 routers present [ 122.598057] vmnet8: no IPv6 routers present [ 122.737891] vmnet1: no IPv6 routers present [ 180.229744] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 180.230339] NTFS-fs warning (device hdb1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel. [ 180.296878] NTFS volume version 3.0. [ 0.000000] Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed May 23 01:46:23 UTC 2007 (Ubuntu 2.6.20-16.28-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001def0000 end: 000000001dff0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000001dff0000 size: 0000000000003000 end: 000000001dff3000 type: 4 [ 0.000000] copy_e820_map() start: 000000001dff3000 size: 000000000000d000 end: 000000001e000000 type: 3 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001dff0000 (usable) [ 0.000000] BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 479MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4c60 [ 0.000000] Entering add_active_range(0, 0, 122864) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 122864 [ 0.000000] HighMem 122864 -> 122864 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 122864 [ 0.000000] On node 0 totalpages: 122864 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 927 pages used for memmap [ 0.000000] Normal zone: 117841 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 GBT ) @ 0x000f65e0 [ 0.000000] ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1dff3000 [ 0.000000] ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1dff3040 [ 0.000000] ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1dff7200 [ 0.000000] ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e0c00000) [ 0.000000] Detected 1915.268 MHz processor. [ 16.662404] Built 1 zonelists. Total pages: 121905 [ 16.662408] Kernel command line: root=UUID=e5bc1329-5943-4104-8bda-fff27cf57145 ro quiet splash [ 16.662582] mapped APIC to ffffd000 (fee00000) [ 16.662584] mapped IOAPIC to ffffc000 (fec00000) [ 16.662588] Enabling fast FPU save and restore... done. [ 16.662591] Enabling unmasked SIMD FPU exception support... done. [ 16.662603] Initializing CPU#0 [ 16.662682] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 16.663862] Console: colour VGA+ 80x25 [ 16.664352] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 16.664689] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 16.679592] Memory: 476216k/491456k available (1992k kernel code, 14712k reserved, 896k data, 328k init, 0k highmem) [ 16.679603] virtual kernel memory layout: [ 16.679604] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 16.679606] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 16.679607] vmalloc : 0xde800000 - 0xff7fe000 ( 527 MB) [ 16.679608] lowmem : 0xc0000000 - 0xddff0000 ( 479 MB) [ 16.679610] .init : 0xc03d9000 - 0xc042b000 ( 328 kB) [ 16.679611] .data : 0xc02f2354 - 0xc03d26d4 ( 896 kB) [ 16.679612] .text : 0xc0100000 - 0xc02f2354 (1992 kB) [ 16.679616] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 16.758576] Calibrating delay using timer specific routine.. 3834.27 BogoMIPS (lpj=7668540) [ 16.758626] Security Framework v1.0.0 initialized [ 16.758634] SELinux: Disabled at boot. [ 16.758653] Mount-cache hash table entries: 512 [ 16.758826] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [ 16.758836] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.758839] CPU: L2 Cache: 512K (64 bytes/line) [ 16.758842] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 [ 16.758853] Compat vDSO mapped to ffffe000. [ 16.758859] Remapping vsyscall page to ffffe000 [ 16.758870] Checking 'hlt' instruction... OK. [ 16.774699] SMP alternatives: switching to UP code [ 16.774958] Freeing SMP alternatives: 11k freed [ 16.775202] Early unpacking initramfs... done [ 17.093825] ACPI: Core revision 20060707 [ 17.097562] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 17.267999] CPU0: AMD Athlon(tm) XP 2600+ stepping 00 [ 17.268027] Total of 1 processors activated (3834.27 BogoMIPS). [ 17.268772] ENABLING IO-APIC IRQs [ 17.269076] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 17.413861] Brought up 1 CPUs [ 17.414153] Booting paravirtualized kernel on bare hardware [ 17.414256] Time: 17:43:09 Date: 05/06/107 [ 17.414295] NET: Registered protocol family 16 [ 17.414413] EISA bus registered [ 17.414418] ACPI: bus type pci registered [ 17.421786] PCI: PCI BIOS revision 2.10 entry at 0xfa4a0, last bus=1 [ 17.421788] PCI: Using configuration type 1 [ 17.421790] Setting up standard PCI resources [ 17.429862] ACPI: Interpreter enabled [ 17.429870] ACPI: Using IOAPIC for interrupt routing [ 17.430499] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.430505] PCI: Probing PCI hardware (bus 00) [ 17.431304] Boot video device is 0000:01:00.0 [ 17.431346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.457467] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 17.457801] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 17.458124] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 17.458428] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.458838] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. [ 17.459231] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. [ 17.459652] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. [ 17.460055] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. [ 17.463069] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.463080] pnp: PnP ACPI init [ 17.467518] pnp: PnP ACPI: found 16 devices [ 17.467523] PnPBIOS: Disabled by ACPI PNP [ 17.467585] PCI: Using ACPI for IRQ routing [ 17.467588] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.489987] NET: Registered protocol family 8 [ 17.489989] NET: Registered protocol family 20 [ 17.490337] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved [ 17.490341] pnp: 00:02: ioport range 0x40f0-0x40ff could not be reserved [ 17.490344] pnp: 00:02: ioport range 0x5000-0x500f has been reserved [ 17.490622] PCI: Bridge: 0000:00:01.0 [ 17.490624] IO window: disabled. [ 17.490629] MEM window: dc000000-ddffffff [ 17.490633] PREFETCH window: d8000000-dbffffff [ 17.490649] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 17.490680] NET: Registered protocol family 2 [ 17.529787] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 17.529894] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 17.530148] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 17.530267] TCP: Hash tables configured (established 16384 bind 8192) [ 17.530270] TCP reno registered [ 17.541791] checking if image is initramfs... it is [ 18.141396] Freeing initrd memory: 6774k freed [ 18.141939] audit: initializing netlink socket (disabled) [ 18.141956] audit(1181151789.396:1): initialized [ 18.142082] VFS: Disk quotas dquot_6.5.1 [ 18.142103] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 18.142157] io scheduler noop registered [ 18.142160] io scheduler anticipatory registered [ 18.142163] io scheduler deadline registered [ 18.142170] io scheduler cfq registered (default) [ 18.142240] PCI: Bypassing VIA 8237 APIC De-Assert Message [ 18.142473] isapnp: Scanning for PnP cards... [ 18.495886] isapnp: No Plug & Play device found [ 18.521976] Real Time Clock Driver v1.12ac [ 18.522037] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.522161] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.522318] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.522880] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.523113] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 18.523364] mice: PS/2 mouse device common for all mice [ 18.524025] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.524302] input: Macintosh mouse button emulation as /class/input/input0 [ 18.524340] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 18.524345] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 18.524649] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 18.525017] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.525022] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.525159] EISA: Probing bus 0 at eisa.0 [ 18.525183] Cannot allocate resource for EISA slot 4 [ 18.525186] Cannot allocate resource for EISA slot 5 [ 18.525199] EISA: Detected 0 cards. [ 18.555374] TCP cubic registered [ 18.555382] NET: Registered protocol family 1 [ 18.555406] Using IPI No-Shortcut mode [ 18.555482] ACPI: (supports S0 S1 S4 S5) [ 18.555534] Magic number: 11:935:743 [ 18.556199] Freeing unused kernel memory: 328k freed [ 18.556470] Time: tsc clocksource has been installed. [ 18.568732] input: AT Translated Set 2 keyboard as /class/input/input1 [ 19.785339] Capability LSM initialized [ 20.327136] SCSI subsystem initialized [ 20.332426] libata version 2.20 loaded. [ 20.333742] sata_via 0000:00:0f.0: version 2.1 [ 20.334184] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 20.334187] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 20.334198] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 20.334222] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 20.334303] ata1: SATA max UDMA/133 cmd 0x00019000 ctl 0x00019402 bmdma 0x0001a000 irq 16 [ 20.334345] ata2: SATA max UDMA/133 cmd 0x00019800 ctl 0x00019c02 bmdma 0x0001a008 irq 16 [ 20.334363] scsi0 : sata_via [ 20.363490] usbcore: registered new interface driver usbfs [ 20.363522] usbcore: registered new interface driver hub [ 20.363552] usbcore: registered new device driver usb [ 20.422393] USB Universal Host Controller Interface driver v3.0 [ 20.436172] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 20.512226] ieee1394: Initialized config rom entry `ip1394' [ 20.532039] Floppy drive(s): fd0 is 1.44M [ 20.538166] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 20.548583] ATA: abnormal status 0x7F on port 0x00019007 [ 20.548612] scsi1 : sata_via [ 20.598889] FDC 0 is a post-1991 82077 [ 20.753891] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 20.764307] ATA: abnormal status 0x7F on port 0x00019807 [ 20.766109] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [ 20.766114] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 20.766124] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 20.766138] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 20.766330] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 20.766364] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000ac00 [ 20.766517] usb usb1: configuration #1 chosen from 1 choice [ 20.766547] hub 1-0:1.0: USB hub found [ 20.766558] hub 1-0:1.0: 2 ports detected [ 20.873928] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 20.873945] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 20.873973] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 20.873999] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000b000 [ 20.874102] usb usb2: configuration #1 chosen from 1 choice [ 20.874129] hub 2-0:1.0: USB hub found [ 20.874137] hub 2-0:1.0: 2 ports detected [ 20.981775] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 20.981793] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 20.981819] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 20.981845] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000b400 [ 20.981948] usb usb3: configuration #1 chosen from 1 choice [ 20.981977] hub 3-0:1.0: USB hub found [ 20.981988] hub 3-0:1.0: 2 ports detected [ 21.089652] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 21.089669] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 21.089701] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 21.089727] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000b800 [ 21.089825] usb usb4: configuration #1 chosen from 1 choice [ 21.089855] hub 4-0:1.0: USB hub found [ 21.089867] hub 4-0:1.0: 2 ports detected [ 21.197608] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 21.197614] 8139cp 0000:00:13.0: Try the "8139too" driver instead. [ 21.199299] 8139too Fast Ethernet driver 0.9.28 [ 21.199349] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 21.199623] eth0: RealTek RTL8139 at 0xde846000, 00:0d:61:68:73:c4, IRQ 18 [ 21.199626] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 21.199723] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17 [ 21.199734] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 21.199766] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 21.199817] ehci_hcd 0000:00:10.4: irq 17, io mem 0xde006000 [ 21.199824] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.199923] usb usb5: configuration #1 chosen from 1 choice [ 21.199955] hub 5-0:1.0: USB hub found [ 21.199967] hub 5-0:1.0: 8 ports detected [ 21.305492] ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 17 (level, low) -> IRQ 19 [ 21.355399] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[de005000-de0057ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 21.355551] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [ 21.355568] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16 [ 21.355580] VP_IDE: chipset revision 6 [ 21.355582] VP_IDE: not 100% native mode: will probe irqs later [ 21.355593] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 21.355602] ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA [ 21.355614] ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:pio [ 21.355624] Probing IDE interface ide0... [ 21.792752] hda: WDC WD800JB-00FMA0, ATA DISK drive [ 22.080421] hdb: Maxtor 90288D2, ATA DISK drive [ 22.140626] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 22.617183] Probing IDE interface ide1... [ 22.631860] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000d61000061df60] [ 23.498744] hdc: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive [ 23.843704] ide1 at 0x170-0x177,0x376 on irq 15 [ 23.856818] hda: max request size: 128KiB [ 23.870705] hda: Host Protected Area detected. [ 23.870708] current capacity is 156299375 sectors (80025 MB) [ 23.870710] native capacity is 156301488 sectors (80026 MB) [ 23.871659] hda: Host Protected Area disabled. [ 23.871664] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 23.871774] hda: cache flushes supported [ 23.871836] hda: hda1 hda2 < hda5 hda6 > [ 23.899283] hdb: max request size: 128KiB [ 23.899363] hdb: 5627664 sectors (2881 MB) w/256KiB Cache, CHS=5583/16/63, UDMA(33) [ 23.899369] hdb: cache flushes not supported [ 23.899403] hdb: hdb1 [ 23.935803] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 23.935815] Uniform CD-ROM driver Revision: 3.20 [ 24.296069] Attempting manual resume [ 24.296074] swsusp: Resume From Partition 3:5 [ 24.296076] PM: Checking swsusp image. [ 24.296262] PM: Resume from disk failed. [ 24.333645] kjournald starting. Commit interval 5 seconds [ 24.333660] EXT3-fs: mounted filesystem with ordered data mode. [ 31.488140] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 32.813400] NET: Registered protocol family 17 [ 33.422496] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.424342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 33.856581] Linux agpgart interface v0.102 (c) Dave Jones [ 34.165869] agpgart: Detected VIA KM400/KM400A chipset [ 34.173955] agpgart: AGP aperture is 128M @ 0xd0000000 [ 34.383921] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 [ 34.450852] input: PC Speaker as /class/input/input3 [ 34.489803] parport: PnPBIOS parport detected. [ 34.489851] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 35.024940] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 35.024946] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 35.024956] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20 [ 35.025106] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 35.663390] fuse init (API version 7.8) [ 35.699515] lp0: using parport0 (interrupt-driven). [ 35.753522] Adding 506008k swap on /dev/disk/by-uuid/8e331965-c1a4-4cde-badb-111e319c6469. Priority:-1 extents:1 across:506008k [ 35.945929] EXT3 FS on hda1, internal journal [ 36.886454] NET: Registered protocol family 10 [ 36.886564] lo: Disabled Privacy Extensions [ 37.443306] eth0: link down [ 38.979290] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 47.206757] eth0: no IPv6 routers present [ 95.999397] kjournald starting. Commit interval 5 seconds [ 95.999645] EXT3 FS on hda6, internal journal [ 95.999651] EXT3-fs: mounted filesystem with ordered data mode. [ 102.503941] input: Power Button (FF) as /class/input/input4 [ 102.509219] ACPI: Power Button (FF) [PWRF] [ 102.549077] input: Power Button (CM) as /class/input/input5 [ 102.554334] ACPI: Power Button (CM) [PWRB] [ 102.612749] Using specific hotkey driver [ 102.643563] No dock devices found. [ 102.679660] ibm_acpi: ec object not found [ 102.763400] pcc_acpi: loading... [ 105.654852] [drm] Initialized drm 1.1.0 20060810 [ 105.776164] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21 [ 105.779664] [drm] Initialized via 2.11.0 20061227 on minor 0 [ 105.875668] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 105.876016] agpgart: Device is in legacy mode, falling back to 2.x [ 105.876231] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 105.876493] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 105.881532] [drm:via_mem_alloc] *ERROR* Attempt to allocate from uninitialized memory manager. [ 106.162501] ppdev: user-space parallel port driver [ 109.304827] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 109.304834] apm: overridden by ACPI. [ 109.541375] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). [ 109.727885] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 109.728425] NFSD: starting 90-second grace period [ 111.027869] vmmon: module license 'unspecified' taints kernel. [ 111.036651] /dev/vmmon[5385]: Module vmmon: registered with major=10 minor=165 [ 111.037119] /dev/vmmon[5385]: Module vmmon: initialized [ 111.139177] /dev/vmnet: open called by PID 5411 (vmnet-bridge) [ 111.139609] /dev/vmnet: hub 0 does not exist, allocating memory. [ 111.139840] /dev/vmnet: port on hub 0 successfully opened [ 111.140103] bridge-eth0: enabling the bridge [ 111.140295] bridge-eth0: up [ 111.140458] bridge-eth0: already up [ 111.140634] bridge-eth0: attached [ 111.181514] /dev/vmnet: open called by PID 5425 (vmnet-natd) [ 111.181866] /dev/vmnet: hub 8 does not exist, allocating memory. [ 111.182098] /dev/vmnet: port on hub 8 successfully opened [ 111.537174] Bluetooth: Core ver 2.11 [ 111.537263] NET: Registered protocol family 31 [ 111.537265] Bluetooth: HCI device and connection manager initialized [ 111.537270] Bluetooth: HCI socket layer initialized [ 111.565553] Bluetooth: L2CAP ver 2.8 [ 111.565559] Bluetooth: L2CAP socket layer initialized [ 111.752164] Bluetooth: RFCOMM socket layer initialized [ 111.752184] Bluetooth: RFCOMM TTY layer initialized [ 111.752186] Bluetooth: RFCOMM ver 1.8 [ 112.243943] /dev/vmnet: open called by PID 5543 (vmnet-netifup) [ 112.244298] /dev/vmnet: hub 1 does not exist, allocating memory. [ 112.244529] /dev/vmnet: port on hub 1 successfully opened [ 112.248570] /dev/vmnet: open called by PID 5544 (vmnet-netifup) [ 112.248925] /dev/vmnet: port on hub 8 successfully opened [ 112.744192] /dev/vmnet: open called by PID 5557 (vmnet-dhcpd) [ 112.744477] /dev/vmnet: port on hub 8 successfully opened [ 112.751167] /dev/vmnet: open called by PID 5582 (vmnet-dhcpd) [ 112.751445] /dev/vmnet: port on hub 1 successfully opened [ 120.744237] eth0: no IPv6 routers present [ 122.598057] vmnet8: no IPv6 routers present [ 122.737891] vmnet1: no IPv6 routers present [ 180.229744] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 180.230339] NTFS-fs warning (device hdb1): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel. [ 180.296878] NTFS volume version 3.0. -- mouse wheel up open context menu when using avocent switchview kvm https://bugs.launchpad.net/bugs/114795 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
