I have tried setting the CONFIG_HPET_EMULATE_RTC option and I still get
these messages.
Below is "cat /proc/drivers/rtc":
rtc_time : 10:50:40
rtc_date : 2007-06-11
rtc_epoch : 1900
alarm : 00:00:00
DST_enable : no
BCD : yes
24hr : yes
square_wave : no
alarm_IRQ : no
update_IRQ : no
periodic_IRQ : no
periodic_freq : 1024
batt_status : okay
Which clearly shows the problem. Periodic IRQ is not set.
The RTC driver test example out of the Documentation/rtc.txt file gives:
RTC Driver Test Example.
Counting 5 update (1/sec) interrupts from reading /dev/rtc:
and then just sits there never to end.
Is this the same for everyone else here.
(I also have AMD64 x2 with nForce 4 m/b). (My problem doesn't appear on
boot, but does when I install the ztdummy driver from the zaptel modules
which I need to run asterisk).
--
When using kqemu, rtc: lost some interrupts at 1024Hz.
https://bugs.launchpad.net/bugs/82149
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
