Jesper1266, thank you for reporting this and helping make Ubuntu better. Hardy 
desktop reached EOL on May 12, 2011.
Please see this document for currently supported Ubuntu releases:
https://wiki.ubuntu.com/Releases

We were wondering if this is still an issue on a supported release? If
so, can you try with the latest development release of Ubuntu? ISO CD
images are available from http://cdimage.ubuntu.com/releases/ .

If it remains an issue, could you run the following command in a
supported release from a Terminal (Applications->Accessories->Terminal).
It will automatically gather and attach updated debug information to
this report.

apport-collect -p linux <replace-with-bug-number>

Also, if you could test the latest upstream kernel available that would
be great. It will allow additional upstream developers to examine the
issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once
you've tested the upstream kernel, please remove the 'needs-upstream-
testing' tag. This can be done by clicking on the yellow pencil icon
next to the tag located at the bottom of the bug description and
deleting the 'needs-upstream-testing' text. Please let us know your
results.

Thanks in advance.

** Description changed:

  The onboard sound card (Realtek ALC1200 chip, using ALC888 driver) does
  not work on my Asus P5Q-EM motherboard, when I have my NVIDIA 9600 GT
  graphics gard installed.
  
  This problem has been reproduced on Ubuntu 8.10 and 8.4. Across all
  tested kernels (different versions and types of kernels)
  
  When the PCI-express graphics card is removed from the port and the
  internal graphics card is used, the sound works.
  
  The sound works under windows when the graphics card is installed,
  therefore its not a hardware problem.
  
  The soundcard is discovered by the system (shows up as an HDA Intel
  ALC888 card) even when the sound does not work. The result of the test
  function (using gnome-sound-pro, sound playback test) is an error
  message:
  
  audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample !
  gconfaudiosink: Could not open audio device for playback.
  
- Another bug states the installation of the NVIDIA graphics drivers as the 
cause og the sound failure, this is not the problem in my case. 
- No sound is produced after a clean install, where no graphics drivers are 
installed. Disbaling the nvidiadriver (replacing with nv in xorg.conf) did not 
change the behaviour either. 
- 
- Below is the output of lspci -vv and lspci -vvn
- 
- Hope this helps to find a solution
- 
- Cheers
- 
- Jesper
- 
- 
---------------------------------------------------------------------------------------------------------------
- 
- 
- lspci -vv
- 
- 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 
03)
-       Subsystem: ASUSTeK Computer Inc. Device 82d3
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
-       Latency: 0
-       Capabilities: <access denied>
-       Kernel modules: intel-agp
- 
- 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port 
(rev 03)
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
-       I/O behind bridge: 0000c000-0000cfff
-       Memory behind bridge: fa000000-feafffff
-       Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
-       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
-       BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
-       Capabilities: <access denied>
-       Kernel driver in use: pcieport-driver
-       Kernel modules: shpchp
- 
- 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI 
Controller #4
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin A routed to IRQ 16
-       Region 4: I/O ports at b800 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI 
Controller #5
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin B routed to IRQ 21
-       Region 4: I/O ports at b880 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI 
Controller #6
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin C routed to IRQ 18
-       Region 4: I/O ports at bc00 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI 
Controller #2 (prog-if 20)
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin C routed to IRQ 18
-       Region 0: Memory at f9fff000 (32-bit, non-prefetchable) [size=1K]
-       Capabilities: <access denied>
-       Kernel driver in use: ehci_hcd
-       Kernel modules: ehci-hcd
- 
- 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio 
Controller
-       Subsystem: ASUSTeK Computer Inc. Device 82fe
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Interrupt: pin A routed to IRQ 22
-       Region 0: Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K]
-       Capabilities: <access denied>
-       Kernel driver in use: HDA Intel
-       Kernel modules: snd-hda-intel
- 
- 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 
1
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
-       Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
-       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
-       BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
-       Capabilities: <access denied>
-       Kernel driver in use: pcieport-driver
-       Kernel modules: shpchp
- 
- 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 
6
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
-       I/O behind bridge: 0000d000-0000dfff
-       Memory behind bridge: feb00000-febfffff
-       Prefetchable memory behind bridge: 00000000f8e00000-00000000f8efffff
-       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
-       BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
-       Capabilities: <access denied>
-       Kernel driver in use: pcieport-driver
-       Kernel modules: shpchp
- 
- 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI 
Controller #1
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin A routed to IRQ 23
-       Region 4: I/O ports at b080 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI 
Controller #2
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin B routed to IRQ 19
-       Region 4: I/O ports at b400 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI 
Controller #3
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin C routed to IRQ 18
-       Region 4: I/O ports at b480 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI 
Controller #1 (prog-if 20)
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin A routed to IRQ 23
-       Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [size=1K]
-       Capabilities: <access denied>
-       Kernel driver in use: ehci_hcd
-       Kernel modules: ehci-hcd
- 
- 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01)
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
-       I/O behind bridge: 0000e000-0000efff
-       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
-       BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
-       Capabilities: <access denied>
- 
- 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface 
Controller
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Capabilities: <access denied>
- 
- 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI 
Controller (prog-if 01)
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin B routed to IRQ 219
-       Region 0: I/O ports at ac00 [size=8]
-       Region 1: I/O ports at a880 [size=4]
-       Region 2: I/O ports at a800 [size=8]
-       Region 3: I/O ports at a480 [size=4]
-       Region 4: I/O ports at a400 [size=32]
-       Region 5: Memory at f9ffc000 (32-bit, non-prefetchable) [size=2K]
-       Capabilities: <access denied>
-       Kernel driver in use: ahci
-       Kernel modules: ahci
- 
- 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
-       Subsystem: ASUSTeK Computer Inc. Device 82d4
-       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Interrupt: pin C routed to IRQ 15
-       Region 0: Memory at f9ffd000 (64-bit, non-prefetchable) [size=256]
-       Region 4: I/O ports at 0400 [size=32]
-       Kernel modules: i2c-i801
- 
- 01:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] 
(rev a1)
-       Subsystem: Giga-byte Technology Device 3481
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin A routed to IRQ 16
-       Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
-       Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
-       Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
-       Region 5: I/O ports at cc00 [size=128]
-       [virtual] Expansion ROM at fea80000 [disabled] [size=512K]
-       Capabilities: <access denied>
-       Kernel driver in use: nvidia
-       Kernel modules: nvidia, nvidiafb
- 
- 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B 
PCI Express Gigabit Ethernet controller (rev 02)
-       Subsystem: ASUSTeK Computer Inc. Device 82c6
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Interrupt: pin A routed to IRQ 220
-       Region 0: I/O ports at d800 [size=256]
-       Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
-       Region 4: Memory at f8ef0000 (64-bit, prefetchable) [size=64K]
-       Expansion ROM at febc0000 [disabled] [size=128K]
-       Capabilities: <access denied>
-       Kernel driver in use: r8169
-       Kernel modules: r8169
- 
- 04:00.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
-       Subsystem: Ensoniq ES1371 [AudioPCI-97]
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 64 (3000ns min, 32000ns max)
-       Interrupt: pin A routed to IRQ 16
-       Region 0: I/O ports at ec00 [size=64]
-       Capabilities: <access denied>
-       Kernel driver in use: ENS1371
-       Kernel modules: snd-ens1371
- 
- 
- 
---------------------------------------------------------------------------------------------------------------
- 
---------------------------------------------------------------------------------------------------------------
- 
---------------------------------------------------------------------------------------------------------------
- 
- 
- lspci -vvn
- 00:00.0 0600: 8086:2e20 (rev 03)
-       Subsystem: 1043:82d3
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
-       Latency: 0
-       Capabilities: <access denied>
-       Kernel modules: intel-agp
- 
- 00:01.0 0604: 8086:2e21 (rev 03)
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
-       I/O behind bridge: 0000c000-0000cfff
-       Memory behind bridge: fa000000-feafffff
-       Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
-       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
-       BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
-       Capabilities: <access denied>
-       Kernel driver in use: pcieport-driver
-       Kernel modules: shpchp
- 
- 00:1a.0 0c03: 8086:3a37
-       Subsystem: 1043:82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin A routed to IRQ 16
-       Region 4: I/O ports at b800 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1a.1 0c03: 8086:3a38
-       Subsystem: 1043:82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin B routed to IRQ 21
-       Region 4: I/O ports at b880 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1a.2 0c03: 8086:3a39
-       Subsystem: 1043:82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin C routed to IRQ 18
-       Region 4: I/O ports at bc00 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1a.7 0c03: 8086:3a3c (prog-if 20)
-       Subsystem: 1043:82d4
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin C routed to IRQ 18
-       Region 0: Memory at f9fff000 (32-bit, non-prefetchable) [size=1K]
-       Capabilities: <access denied>
-       Kernel driver in use: ehci_hcd
-       Kernel modules: ehci-hcd
- 
- 00:1b.0 0403: 8086:3a3e
-       Subsystem: 1043:82fe
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Interrupt: pin A routed to IRQ 22
-       Region 0: Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K]
-       Capabilities: <access denied>
-       Kernel driver in use: HDA Intel
-       Kernel modules: snd-hda-intel
- 
- 00:1c.0 0604: 8086:3a40
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
-       Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
-       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
-       BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
-       Capabilities: <access denied>
-       Kernel driver in use: pcieport-driver
-       Kernel modules: shpchp
- 
- 00:1c.5 0604: 8086:3a4a
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
-       I/O behind bridge: 0000d000-0000dfff
-       Memory behind bridge: feb00000-febfffff
-       Prefetchable memory behind bridge: 00000000f8e00000-00000000f8efffff
-       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
-       BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
-       Capabilities: <access denied>
-       Kernel driver in use: pcieport-driver
-       Kernel modules: shpchp
- 
- 00:1d.0 0c03: 8086:3a34
-       Subsystem: 1043:82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin A routed to IRQ 23
-       Region 4: I/O ports at b080 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1d.1 0c03: 8086:3a35
-       Subsystem: 1043:82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin B routed to IRQ 19
-       Region 4: I/O ports at b400 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1d.2 0c03: 8086:3a36
-       Subsystem: 1043:82d4
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin C routed to IRQ 18
-       Region 4: I/O ports at b480 [size=32]
-       Capabilities: <access denied>
-       Kernel driver in use: uhci_hcd
-       Kernel modules: uhci-hcd
- 
- 00:1d.7 0c03: 8086:3a3a (prog-if 20)
-       Subsystem: 1043:82d4
-       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin A routed to IRQ 23
-       Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [size=1K]
-       Capabilities: <access denied>
-       Kernel driver in use: ehci_hcd
-       Kernel modules: ehci-hcd
- 
- 00:1e.0 0604: 8086:244e (rev 90) (prog-if 01)
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
-       I/O behind bridge: 0000e000-0000efff
-       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
-       BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
-               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
-       Capabilities: <access denied>
- 
- 00:1f.0 0601: 8086:3a16
-       Subsystem: 1043:82d4
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Capabilities: <access denied>
- 
- 00:1f.2 0106: 8086:3a22 (prog-if 01)
-       Subsystem: 1043:82d4
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin B routed to IRQ 219
-       Region 0: I/O ports at ac00 [size=8]
-       Region 1: I/O ports at a880 [size=4]
-       Region 2: I/O ports at a800 [size=8]
-       Region 3: I/O ports at a480 [size=4]
-       Region 4: I/O ports at a400 [size=32]
-       Region 5: Memory at f9ffc000 (32-bit, non-prefetchable) [size=2K]
-       Capabilities: <access denied>
-       Kernel driver in use: ahci
-       Kernel modules: ahci
- 
- 00:1f.3 0c05: 8086:3a30
-       Subsystem: 1043:82d4
-       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
-       Interrupt: pin C routed to IRQ 15
-       Region 0: Memory at f9ffd000 (64-bit, non-prefetchable) [size=256]
-       Region 4: I/O ports at 0400 [size=32]
-       Kernel modules: i2c-i801
- 
- 01:00.0 0300: 10de:0622 (rev a1)
-       Subsystem: 1458:3481
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0
-       Interrupt: pin A routed to IRQ 16
-       Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
-       Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
-       Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
-       Region 5: I/O ports at cc00 [size=128]
-       [virtual] Expansion ROM at fea80000 [disabled] [size=512K]
-       Capabilities: <access denied>
-       Kernel driver in use: nvidia
-       Kernel modules: nvidia, nvidiafb
- 
- 02:00.0 0200: 10ec:8168 (rev 02)
-       Subsystem: 1043:82c6
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 32 bytes
-       Interrupt: pin A routed to IRQ 220
-       Region 0: I/O ports at d800 [size=256]
-       Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
-       Region 4: Memory at f8ef0000 (64-bit, prefetchable) [size=64K]
-       Expansion ROM at febc0000 [disabled] [size=128K]
-       Capabilities: <access denied>
-       Kernel driver in use: r8169
-       Kernel modules: r8169
- 
- 04:00.0 0401: 1274:1371 (rev 06)
-       Subsystem: 1274:1371
-       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 64 (3000ns min, 32000ns max)
-       Interrupt: pin A routed to IRQ 16
-       Region 0: I/O ports at ec00 [size=64]
-       Capabilities: <access denied>
-       Kernel driver in use: ENS1371
-       Kernel modules: snd-ens1371
+ Another bug states the installation of the NVIDIA graphics drivers as the 
cause og the sound failure, this is not the problem in my case.
+ No sound is produced after a clean install, where no graphics drivers are 
installed. Disbaling the nvidiadriver (replacing with nv in xorg.conf) did not 
change the behaviour either.

** Tags removed: alsa asus hda-intel sound
** Tags added: hardy intrepid kernel-sound needs-upstream-testing

** Changed in: linux (Ubuntu)
       Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/292743

Title:
  Sound not working when NVIDIA graphics card installed

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/292743/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to