Cut from Bug Description.

** Tags removed: gbj-oklahoma-0902
** Tags added: needs-upstream-testing

** Attachment removed: "out1"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/150204/+attachment/184013/+files/out1

** Attachment added: "lspci -vv"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/150204/+attachment/3190671/+files/lspci%20-vv

** Description changed:

  Hello. My problem is that I can't shut down my Packard Bell EasyNote V7900 
whit Ubuntu. It stops in the Ubuntu Logo when it's shutting down and I have to 
push the power button for a while to shut down my PC.
  This is a problem that I had have with all Ubuntu's distros.
  Rarely my PC shuts down, only when the NTFS partitons aren't mounted because 
Windows is hibernated.
  
  Please, I would love that I could shut down my PC only by clicking a
  button in the next Ubuntu 7.10. :)
  
  Thank you.
  
- 
  This is the output of "lspci -vv":
- 
- 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 
945GT Express Memory Controller Hub (rev 03)
-         Subsystem: Unknown device 1631:c017
-         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
-         Latency: 0
-         Capabilities: [e0] Vendor Specific Information
- 
- 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 
945GT Express PCI Express Root Port (rev 03) (prog-if 00 [Normal decode])
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
-         I/O behind bridge: 00007000-00007fff
-         Memory behind bridge: 5c200000-5c2fffff
-         Prefetchable memory behind bridge: 0000000048000000-000000004fffffff
-         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
-         BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
-         Capabilities: [88] Subsystem: Unknown device 1631:c017
-         Capabilities: [80] Power Management version 2
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-         Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- 
Queue=0/0 Enable-
-                 Address: 00000000  Data: 0000
-         Capabilities: [a0] Express Root Port (Slot+) IRQ 0
-                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
-                 Device: Latency L0s <64ns, L1 <1us
-                 Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
-                 Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
-                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
-                 Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2
-                 Link: Latency L0s <256ns, L1 <4us
-                 Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
-                 Link: Speed 2.5Gb/s, Width x16
-                 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
-                 Slot: Number 1, PowerLimit 75.000000
-                 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
-                 Slot: AttnInd Off, PwrInd On, Power-
-                 Root: Correctable- Non-Fatal- Fatal- PME-
- 
- 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition 
Audio Controller (rev 02)
-         Subsystem: Unknown device 1631:c017
-         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Interrupt: pin A routed to IRQ 21
-         Region 0: Memory at 5c300000 (64-bit, non-prefetchable) [size=16K]
-         Capabilities: [50] Power Management version 2
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-         Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/0 Enable-
-                 Address: 0000000000000000  Data: 0000
-         Capabilities: [70] Express Unknown type IRQ 0
-                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
-                 Device: Latency L0s <64ns, L1 <1us
-                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
-                 Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
-                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
-                 Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
-                 Link: Latency L0s <64ns, L1 <1us
-                 Link: ASPM Disabled CommClk- ExtSynch-
-                 Link: Speed unknown, Width x0
- 
- 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 
(rev 02) (prog-if 00 [Normal decode])
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0, Cache Line Size: 64 bytes
-         Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
-         I/O behind bridge: 00006000-00006fff
-         Memory behind bridge: 5b200000-5c1fffff
-         Prefetchable memory behind bridge: 0000000054100000-00000000550fffff
-         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
-         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
-         Capabilities: [40] Express Root Port (Slot+) IRQ 0
-                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
-                 Device: Latency L0s unlimited, L1 unlimited
-                 Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
-                 Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
-                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
-                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
-                 Link: Latency L0s <1us, L1 <4us
-                 Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
-                 Link: Speed 2.5Gb/s, Width x0
-                 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
-                 Slot: Number 0, PowerLimit 6.500000
-                 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
-                 Slot: AttnInd Unknown, PwrInd Unknown, Power-
-                 Root: Correctable- Non-Fatal- Fatal- PME-
-         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- 
Queue=0/0 Enable-
-                 Address: 00000000  Data: 0000
-         Capabilities: [90] Subsystem: Unknown device 1631:c017
-         Capabilities: [a0] Power Management version 2
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- 
- 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 
(rev 02) (prog-if 00 [Normal decode])
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0, Cache Line Size: 64 bytes
-         Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
-         I/O behind bridge: 00005000-00005fff
-         Memory behind bridge: 5a100000-5b1fffff
-         Prefetchable memory behind bridge: 0000000055100000-00000000560fffff
-         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
-         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
-         Capabilities: [40] Express Root Port (Slot+) IRQ 0
-                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
-                 Device: Latency L0s unlimited, L1 unlimited
-                 Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
-                 Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
-                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
-                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
-                 Link: Latency L0s <256ns, L1 <4us
-                 Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
-                 Link: Speed 2.5Gb/s, Width x1
-                 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
-                 Slot: Number 1, PowerLimit 6.500000
-                 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
-                 Slot: AttnInd Unknown, PwrInd Unknown, Power-
-                 Root: Correctable- Non-Fatal- Fatal- PME-
-         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- 
Queue=0/0 Enable-
-                 Address: 00000000  Data: 0000
-         Capabilities: [90] Subsystem: Unknown device 1631:c017
-         Capabilities: [a0] Power Management version 2
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- 
- 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 
(rev 02) (prog-if 00 [Normal decode])
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0, Cache Line Size: 64 bytes
-         Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
-         I/O behind bridge: 00004000-00004fff
-         Memory behind bridge: 59100000-5a0fffff
-         Prefetchable memory behind bridge: 0000000056100000-00000000570fffff
-         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
-         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
-         Capabilities: [40] Express Root Port (Slot+) IRQ 0
-                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
-                 Device: Latency L0s unlimited, L1 unlimited
-                 Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
-                 Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
-                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
-                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
-                 Link: Latency L0s <1us, L1 <4us
-                 Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
-                 Link: Speed 2.5Gb/s, Width x0
-                 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
-                 Slot: Number 2, PowerLimit 6.500000
-                 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
-                 Slot: AttnInd Unknown, PwrInd Unknown, Power-
-                 Root: Correctable- Non-Fatal- Fatal- PME-
-         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- 
Queue=0/0 Enable-
-                 Address: 00000000  Data: 0000
-         Capabilities: [90] Subsystem: Unknown device 1631:c017
-         Capabilities: [a0] Power Management version 2
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- 
- 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 
(rev 02) (prog-if 00 [Normal decode])
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0, Cache Line Size: 64 bytes
-         Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
-         I/O behind bridge: 00003000-00003fff
-         Memory behind bridge: 58100000-590fffff
-         Prefetchable memory behind bridge: 0000000057100000-00000000580fffff
-         Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
-         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
-         Capabilities: [40] Express Root Port (Slot+) IRQ 0
-                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
-                 Device: Latency L0s unlimited, L1 unlimited
-                 Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
-                 Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
-                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
-                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
-                 Link: Latency L0s <1us, L1 <4us
-                 Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
-                 Link: Speed 2.5Gb/s, Width x0
-                 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
-                 Slot: Number 0, PowerLimit 6.500000
-                 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
-                 Slot: AttnInd Unknown, PwrInd Unknown, Power-
-                 Root: Correctable- Non-Fatal- Fatal- PME-
-         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- 
Queue=0/0 Enable-
-                 Address: 00000000  Data: 0000
-         Capabilities: [90] Subsystem: Unknown device 1631:c017
-         Capabilities: [a0] Power Management version 2
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- 
- 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #1 (rev 02) (prog-if 00 [UHCI])
-         Subsystem: Unknown device 1631:c017
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Interrupt: pin A routed to IRQ 16
-         Region 4: I/O ports at 8080 [size=32]
- 
- 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #2 (rev 02) (prog-if 00 [UHCI])
-         Subsystem: Unknown device 1631:c017
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Interrupt: pin B routed to IRQ 17
-         Region 4: I/O ports at 8060 [size=32]
- 
- 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #3 (rev 02) (prog-if 00 [UHCI])
-         Subsystem: Unknown device 1631:c017
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Interrupt: pin C routed to IRQ 18
-         Region 4: I/O ports at 8040 [size=32]
- 
- 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #4 (rev 02) (prog-if 00 [UHCI])
-         Subsystem: Unknown device 1631:c017
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Interrupt: pin D routed to IRQ 19
-         Region 4: I/O ports at 8020 [size=32]
- 
- 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 02) (prog-if 20 [EHCI])
-         Subsystem: Unknown device 1631:c017
-         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Interrupt: pin A routed to IRQ 16
-         Region 0: Memory at 5c304000 (32-bit, non-prefetchable) [size=1K]
-         Capabilities: [50] Power Management version 2
-                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-         Capabilities: [58] Debug port
- 
- 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 
(prog-if 01 [Subtractive decode])
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Bus: primary=00, secondary=06, subordinate=07, sec-latency=32
-         I/O behind bridge: 00002000-00002fff
-         Memory behind bridge: 52000000-540fffff
-         Prefetchable memory behind bridge: 0000000050000000-0000000051ffffff
-         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR+
-         BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
-         Capabilities: [50] Subsystem: Unknown device 1631:c017
- 
- 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge 
(rev 02)
-         Subsystem: Unknown device 1631:c017
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Capabilities: [e0] Vendor Specific Information
- 
- 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller 
(rev 02) (prog-if 8a [Master SecP PriP])
-         Subsystem: Unknown device 1631:c017
-         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Interrupt: pin A routed to IRQ 16
-         Region 0: I/O ports at 01f0 [size=8]
-         Region 1: I/O ports at 03f4 [size=1]
-         Region 2: I/O ports at 0170 [size=8]
-         Region 3: I/O ports at 0374 [size=1]
-         Region 4: I/O ports at 80a0 [size=16]
- 
- 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 
02)
-         Subsystem: Unknown device 1631:c017
-         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Interrupt: pin B routed to IRQ 11
-         Region 4: I/O ports at 8000 [size=32]
- 
- 01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility 
X1600] (prog-if 00 [VGA])
-         Subsystem: Unknown device 1631:c017
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0
-         Interrupt: pin A routed to IRQ 16
-         Region 0: Memory at 48000000 (32-bit, prefetchable) [size=128M]
-         Region 1: I/O ports at 7000 [size=256]
-         Region 2: Memory at 5c200000 (32-bit, non-prefetchable) [size=64K]
-         Expansion ROM at 5c220000 [disabled] [size=128K]
-         Capabilities: [50] Power Management version 2
-                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-         Capabilities: [58] Express Legacy Endpoint IRQ 0
-                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
-                 Device: Latency L0s <4us, L1 unlimited
-                 Device: AtnBtn- AtnInd- PwrInd-
-                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
-                 Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
-                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
-                 Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
-                 Link: Latency L0s <64ns, L1 <1us
-                 Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
-                 Link: Speed 2.5Gb/s, Width x16
-         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/0 Enable-
-                 Address: 0000000000000000  Data: 0000
- 
- 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network 
Connection (rev 02)
-         Subsystem: Intel Corporation Unknown device 1001
-         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 0, Cache Line Size: 64 bytes
-         Interrupt: pin A routed to IRQ 17
-         Region 0: Memory at 5a100000 (32-bit, non-prefetchable) [size=4K]
-         Capabilities: [c8] Power Management version 2
-                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-         Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/0 Enable-
-                 Address: 0000000000000000  Data: 0000
-         Capabilities: [e0] Express Legacy Endpoint IRQ 0
-                 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
-                 Device: Latency L0s <512ns, L1 unlimited
-                 Device: AtnBtn- AtnInd- PwrInd-
-                 Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
-                 Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
-                 Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
-                 Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
-                 Link: Latency L0s <128ns, L1 <64us
-                 Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
-                 Link: Speed 2.5Gb/s, Width x1
- 
- 06:02.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 
(prog-if 10 [OHCI])
-         Subsystem: Unknown device 1631:c017
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 64
-         Interrupt: pin A routed to IRQ 16
-         Region 0: Memory at 54003000 (32-bit, non-prefetchable) [size=4K]
-         Region 1: Memory at 54004000 (32-bit, non-prefetchable) [size=2K]
-         Capabilities: [60] Power Management version 2
-                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME+
- 
- 06:02.2 Generic system peripheral [0805]: O2 Micro, Inc. Integrated MMC/SD 
Controller (rev 01)
-         Subsystem: Unknown device 1631:c017
-         Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Interrupt: pin A routed to IRQ 16
-         Region 0: Memory at 54004800 (32-bit, non-prefetchable) [size=256]
-         Capabilities: [a0] Power Management version 2
-                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- 
- 06:02.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller 
(rev 01)
-         Subsystem: Unknown device 1631:c017
-         Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Interrupt: pin A routed to IRQ 11
-         Region 0: Memory at 54001000 (32-bit, non-prefetchable) [size=4K]
-         Capabilities: [a0] Power Management version 2
-                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- 
- 06:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection 
(rev 02)
-         Subsystem: Unknown device 1631:c017
-         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
-         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
-         Latency: 64 (2000ns min, 14000ns max)
-         Interrupt: pin A routed to IRQ 20
-         Region 0: Memory at 54000000 (32-bit, non-prefetchable) [size=4K]
-         Region 1: I/O ports at 2200 [size=64]
-         Capabilities: [dc] Power Management version 2
-                 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
-                 Status: D0 PME-Enable- DSel=0 DScale=2 PME-
+ 
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/150204/+attachment/3190671/+files/lspci%20-vv

** Attachment removed: "out"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/150204/+attachment/184022/+files/out

** Attachment removed: "lspcivv.txt"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/150204/+attachment/307856/+files/lspcivv.txt

** Attachment removed: ""lspci -vv"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/150204/+attachment/474412/+files/%22lspci%20-vv

** Attachment removed: "DSC00180.JPG"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/150204/+attachment/484425/+files/DSC00180.JPG

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/150204

Title:
  EasyNote V7900 doesn't shut down

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/150204/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to