** Description changed: - I'm using Ubuntu quantal (development branch), since the new 3.5 kernel coming, can't boot without "nomodeset" option. I don't know where is the problem, kernel or ati module, but with 3.4 kernel there is no problem booting the Ubuntu. - When choose the 3.5 kernel from grub menu and start loading, after 10-15 seconds, just freeze, and can't do anything. I tried and mainline kernel from kernel-ppa/mainline but no change, still can't boot. With nomodeset, 3D don't work corectly, cant use normal unity session, unity 2D session works but with artefacts. - - - 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) - 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03) - 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) - 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) - 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) - 00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) - 00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) - 00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) - 00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) - 00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) - 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) - 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) - 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) - 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 01) - 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M52 [Mobility Radeon X1300] - 02:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller - 02:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) - 02:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller - 02:06.4 Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller - 08:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express (rev 21) - 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) - tolostoi@HP-Compaq-nc6400-RH484EA-ABB-tstoi:~$ lsb_release -a - No LSB modules are available. - Distributor ID: Ubuntu - Description: Ubuntu quantal (development branch) - Release: 12.10 - Codename: quantal - - - 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- - Latency: 0 - Capabilities: [e0] Vendor Specific Information: Len=09 <?> - - 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00 [Normal decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 - I/O behind bridge: 00004000-00004fff - Memory behind bridge: e0600000-e06fffff - Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- - BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- - Capabilities: [88] Subsystem: Hewlett-Packard Company Device [103c:30ac] - Capabilities: [80] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- - Address: fee0300c Data: 4171 - Capabilities: [a0] Express (v1) Root Port (Slot-), MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us - ExtTag- RBE- FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- - LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us - ClockPM- Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- - RootCap: CRSVisible- - RootSta: PME ReqID 0000, PMEStatus- PMEPending- - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed+ WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - Capabilities: [140 v1] Root Complex Link - Desc: PortNumber=02 ComponentID=01 EltType=Config - Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ - Addr: 00000000fed99000 - Kernel driver in use: pcieport - Kernel modules: shpchp - - 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 45 - Region 0: Memory at e0700000 (64-bit, non-prefetchable) [size=16K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ - Address: 00000000fee0100c Data: 41a1 - Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us - ExtTag- RBE- FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- - LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us - ClockPM- Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed- WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 - Status: NegoPending- InProgress- - Capabilities: [130 v1] Root Complex Link - Desc: PortNumber=0f ComponentID=02 EltType=Config - Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ - Addr: 00000000fed90000 - Kernel driver in use: snd_hda_intel - Kernel modules: snd-hda-intel - - 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 - I/O behind bridge: 00002000-00002fff - Memory behind bridge: e0100000-e01fffff - Prefetchable memory behind bridge: 0000000084000000-00000000841fffff - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- - BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- - Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited - ExtTag- RBE- FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- - LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us - ClockPM- Surprise- LLActRep+ BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- - SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ - Slot #2, PowerLimit 10.000W; Interlock- NoCompl- - SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- - Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- - SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- - Changed: MRL- PresDet- LinkState+ - RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- - RootCap: CRSVisible- - RootSta: PME ReqID 0000, PMEStatus- PMEPending- - Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- - Address: fee0300c Data: 4179 - Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30ac] - Capabilities: [a0] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed+ WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 - Status: NegoPending- InProgress- - Capabilities: [180 v1] Root Complex Link - Desc: PortNumber=01 ComponentID=02 EltType=Config - Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ - Addr: 00000000fed90001 - Kernel driver in use: pcieport - Kernel modules: shpchp - - 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Bus: primary=00, secondary=10, subordinate=10, sec-latency=0 - I/O behind bridge: 00003000-00003fff - Memory behind bridge: e0000000-e00fffff - Prefetchable memory behind bridge: 0000000084200000-00000000843fffff - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- - BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- - Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited - ExtTag- RBE- FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- - LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us - ClockPM- Surprise- LLActRep+ BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- - SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ - Slot #3, PowerLimit 0.160W; Interlock- NoCompl- - SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- - Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- - SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- - Changed: MRL- PresDet- LinkState- - RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- - RootCap: CRSVisible- - RootSta: PME ReqID 0000, PMEStatus- PMEPending- - Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- - Address: fee0300c Data: 4181 - Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30ac] - Capabilities: [a0] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed+ WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 - Status: NegoPending- InProgress- - Capabilities: [180 v1] Root Complex Link - Desc: PortNumber=02 ComponentID=02 EltType=Config - Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ - Addr: 00000000fed90001 - Kernel driver in use: pcieport - Kernel modules: shpchp - - 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 20 - Region 4: I/O ports at 5000 [size=32] - Kernel driver in use: uhci_hcd - - 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin B routed to IRQ 22 - Region 4: I/O ports at 5020 [size=32] - Kernel driver in use: uhci_hcd - - 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin C routed to IRQ 18 - Region 4: I/O ports at 5040 [size=32] - Kernel driver in use: uhci_hcd - - 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin D routed to IRQ 19 - Region 4: I/O ports at 5060 [size=32] - Kernel driver in use: uhci_hcd - - 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 20 - Region 0: Memory at e0704000 (32-bit, non-prefetchable) [size=1K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [58] Debug port: BAR=1 offset=00a0 - Kernel driver in use: ehci_hcd - - 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01 [Subtractive decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Bus: primary=00, secondary=02, subordinate=06, sec-latency=32 - I/O behind bridge: 00006000-00006fff - Memory behind bridge: e0200000-e05fffff - Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff - Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- - BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- - Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:30ac] - - 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Capabilities: [e0] Vendor Specific Information: Len=0c <?> - Kernel modules: leds-ss4200, iTCO_wdt, intel-rng - - 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 16 - Region 0: I/O ports at 01f0 [size=8] - Region 1: I/O ports at 03f4 [size=1] - Region 2: I/O ports at 0170 [size=8] - Region 3: I/O ports at 0374 [size=1] - Region 4: I/O ports at 5080 [size=16] - Kernel driver in use: ata_piix - - 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] [8086:27c5] (rev 01) (prog-if 01 [AHCI 1.0]) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin B routed to IRQ 43 - Region 0: I/O ports at 13f0 [size=8] - Region 1: I/O ports at 15f4 [size=4] - Region 2: I/O ports at 1370 [size=8] - Region 3: I/O ports at 1574 [size=4] - Region 4: I/O ports at 50b0 [size=16] - Region 5: Memory at e0705000 (32-bit, non-prefetchable) [size=1K] - Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- - Address: fee0100c Data: 4191 - Capabilities: [70] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Kernel driver in use: ahci - - 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI M52 [Mobility Radeon X1300] [1002:714a] (prog-if 00 [VGA controller]) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 16 - Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M] - Region 1: I/O ports at 4000 [size=256] - Region 2: Memory at e0600000 (32-bit, non-prefetchable) [size=64K] - [virtual] Expansion ROM at e0620000 [disabled] [size=128K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [58] Express (v1) Legacy Endpoint, MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited - ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- - LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us - ClockPM- Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ - Address: 0000000000000000 Data: 0000 - Kernel driver in use: radeon - Kernel modules: radeon - - 02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 168, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 18 - Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=4K] - Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 - Memory window 0: 80000000-83ffffff (prefetchable) - Memory window 1: 88000000-8bffffff - I/O window 0: 00006000-000060ff - I/O window 1: 00006400-000064ff - BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ - 16-bit legacy interface ports at 0001 - Kernel driver in use: yenta_cardbus - Kernel modules: yenta_socket - - 02:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 18 - Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K] - Capabilities: [44] Power Management version 2 - Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Kernel driver in use: tifm_7xx1 - Kernel modules: tifm_7xx1 - - 02:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes - Interrupt: pin C routed to IRQ 22 - Region 0: Memory at e0202000 (32-bit, non-prefetchable) [size=256] - Capabilities: [80] Power Management version 2 - Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Kernel driver in use: sdhci-pci - Kernel modules: sdhci-pci - - 02:06.4 Communication controller [0780]: Texas Instruments PCIxx12 GemCore based SmartCard controller [104c:803d] - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Interrupt: pin A routed to IRQ 11 - Region 0: Memory at e0203000 (32-bit, non-prefetchable) [size=4K] - Region 1: Memory at e0204000 (32-bit, non-prefetchable) [size=4K] - Capabilities: [44] Power Management version 2 - Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - - 08:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express [14e4:16fd] (rev 21) - Subsystem: Hewlett-Packard Company Device [103c:30ac] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 46 - Region 0: Memory at e0100000 (64-bit, non-prefetchable) [size=64K] - Expansion ROM at <ignored> [disabled] - Capabilities: [48] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- - Capabilities: [50] Vital Product Data - Product Name: Broadcom NetXtreme Gigabit Ethernet Controller - Read-only fields: - [PN] Part number: BCM95751M - [EC] Engineering changes: 106679-15 - [SN] Serial number: 0123456789 - [MN] Manufacture ID: 31 34 65 34 - [RV] Reserved: checksum bad, 27 byte(s) reserved - Read/write fields: - [YA] Asset tag: XYZ01234567 - [RW] Read-write area: 107 byte(s) free - End - Capabilities: [58] MSI: Enable+ Count=1/8 Maskable- 64bit+ - Address: 00000000fee0300c Data: 41a9 - Capabilities: [d0] Express (v1) Endpoint, MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited - ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 512 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- - LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us - ClockPM- Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - Capabilities: [100 v1] Advanced Error Reporting - UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- - UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- - UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- - CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- - CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- - AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- - Capabilities: [13c v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed- WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - Capabilities: [160 v1] Device Serial Number 00-16-d4-ff-fe-4a-b9-2e - Kernel driver in use: tg3 - Kernel modules: tg3 - - 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) - Subsystem: Hewlett-Packard Company PRO/Wireless 3945ABG [Golan] Network Connection [103c:135c] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 44 - Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=4K] - Capabilities: [c8] Power Management version 2 - Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ - Address: 00000000fee0100c Data: 4199 - Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited - ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- - LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us - ClockPM+ Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - Capabilities: [100 v1] Advanced Error Reporting - UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- - UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- - UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- - CESta: RxErr+ BadTLP+ BadDLLP+ Rollover- Timeout- NonFatalErr- - CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- - AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- - Capabilities: [140 v1] Device Serial Number 00-18-de-ff-ff-bf-64-95 - Kernel driver in use: iwl3945 - Kernel modules: iwl3945 + I'm using Ubuntu quantal (development branch), since the new 3.5 kernel coming, can't boot without "nomodeset" option. I don't know where is the problem, kernel or ati module, but with 3.4 kernel there is no problem booting the Ubuntu. + When choose the 3.5 kernel from grub menu and start loading, after 10-15 seconds, just freeze, and can't do anything. I tried and mainline kernel from kernel-ppa/mainline but no change, still can't boot. With nomodeset, 3D don't work corectly, cant use normal unity session, unity 2D session works but with artefacts. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: linux-image-generic 3.5.0.6.6 ProcVersionSignature: Ubuntu 3.4.0-5.11-generic 3.4.0 Uname: Linux 3.4.0-5-generic x86_64 ApportVersion: 2.4-0ubuntu5 Architecture: amd64 AudioDevicesInUse: - USER PID ACCESS COMMAND - /dev/snd/controlC0: tolostoi 1789 F.... pulseaudio + USER PID ACCESS COMMAND + /dev/snd/controlC0: tolostoi 1789 F.... pulseaudio Date: Fri Jul 27 09:38:39 2012 HibernationDevice: RESUME=UUID=8f2b4b51-ca26-4a68-8969-ea8e5c00f4b6 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120408) MachineType: Hewlett-Packard HP Compaq nc6400 (RH484EA#ABB) PccardctlIdent: - Socket 0: - no product info available + Socket 0: + no product info available PccardctlStatus: - Socket 0: - no card + Socket 0: + no card ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.4.0-5-generic root=UUID=c2283854-278c-4d59-93dd-d05801489a93 ro quiet splash RelatedPackageVersions: - linux-restricted-modules-3.4.0-5-generic N/A - linux-backports-modules-3.4.0-5-generic N/A - linux-firmware 1.86 + linux-restricted-modules-3.4.0-5-generic N/A + linux-backports-modules-3.4.0-5-generic N/A + linux-firmware 1.86 SourcePackage: linux UpgradeStatus: Upgraded to quantal on 2012-06-11 (45 days ago) dmi.bios.date: 09/05/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68YCD Ver. F.0B dmi.board.name: 30AC dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 56.36 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68YCDVer.F.0B:bd09/05/2007:svnHewlett-Packard:pnHPCompaqnc6400(RH484EA#ABB):pvrF.0B:rvnHewlett-Packard:rn30AC:rvrKBCVersion56.36:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq nc6400 (RH484EA#ABB) dmi.product.version: F.0B dmi.sys.vendor: Hewlett-Packard
** Tags added: needs-upstream-testing -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1029790 Title: Can't boot without nomodeset option-kernel 3.5.X.X ATI M52 [Mobility Radeon X1300] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1029790/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
