Albert Chin, this bug was reported a while ago and there hasn't been any
activity in it recently. We were wondering if this is still an issue? If
so, could you please test for this with the latest development release
of Ubuntu? ISO CD images are available from
http://cdimage.ubuntu.com/releases/ .

If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications->Accessories->Terminal), as it will automatically gather
and attach updated debug information to this report:

apport-collect -p linux <replace-with-bug-number>

Also, could you please test the latest upstream kernel available? It
will allow additional upstream developers to examine the issue. Refer to
https://wiki.ubuntu.com/KernelMainlineBuilds . Please do not test the
kernel in the daily folder, but the one all the way at the bottom. Once
you've tested the upstream kernel, please remove the 'needs-upstream-
testing' tag. This can be done by clicking on the yellow pencil icon
next to the tag located at the bottom of the bug description and
deleting the 'needs-upstream-testing' text. As well, please comment on
which kernel version specifically you tested.

If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.

If you are unable to test the mainline kernel, for example it will not
boot, please add the tag: 'kernel-unable-to-test-upstream', and comment
as to why specifically you were unable to test it.

Please let us know your results. Thanks in advance.

Helpful Bug Reporting Links:
https://help.ubuntu.com/community/ReportingBugs#Bug_Reporting_Etiquette
https://help.ubuntu.com/community/ReportingBugs#A3._Make_sure_the_bug_hasn.27t_already_been_reported
https://help.ubuntu.com/community/ReportingBugs#Adding_Apport_Debug_Information_to_an_Existing_Launchpad_Bug
https://help.ubuntu.com/community/ReportingBugs#Adding_Additional_Attachments_to_an_Existing_Launchpad_Bug

** Description changed:

  # ifconfig bond0
- bond0     Link encap:Ethernet  HWaddr 00:1b:21:b7:21:ea  
-           inet6 addr: fe80::21b:21ff:feb7:21ea/64 Scope:Link
-           UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
-           RX packets:17 errors:0 dropped:16 overruns:0 frame:0
-           TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
-           collisions:0 txqueuelen:0 
-           RX bytes:2044 (2.0 KB)  TX bytes:2912 (2.9 KB)
+ bond0     Link encap:Ethernet  HWaddr 00:1b:21:b7:21:ea
+           inet6 addr: fe80::21b:21ff:feb7:21ea/64 Scope:Link
+           UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
+           RX packets:17 errors:0 dropped:16 overruns:0 frame:0
+           TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
+           collisions:0 txqueuelen:0
+           RX bytes:2044 (2.0 KB)  TX bytes:2912 (2.9 KB)
  
  # ifconfig eth2
- eth2      Link encap:Ethernet  HWaddr 00:1b:21:b7:21:ea  
-           UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
-           RX packets:36 errors:0 dropped:0 overruns:0 frame:0
-           TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
-           collisions:0 txqueuelen:1000 
-           RX bytes:4464 (4.4 KB)  TX bytes:5958 (5.9 KB)
-           Memory:b2420000-b2440000 
+ eth2      Link encap:Ethernet  HWaddr 00:1b:21:b7:21:ea
+           UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
+           RX packets:36 errors:0 dropped:0 overruns:0 frame:0
+           TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
+           collisions:0 txqueuelen:1000
+           RX bytes:4464 (4.4 KB)  TX bytes:5958 (5.9 KB)
+           Memory:b2420000-b2440000
  
  # ifconfig eth3
  root@trunks:/home/china# ifconfig eth3
- eth3      Link encap:Ethernet  HWaddr 00:1b:21:b7:21:ea  
-           UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
-           RX packets:52 errors:0 dropped:1 overruns:0 frame:0
-           TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
-           collisions:0 txqueuelen:1000 
-           RX bytes:6012 (6.0 KB)  TX bytes:6696 (6.6 KB)
-           Memory:b2400000-b2420000 
+ eth3      Link encap:Ethernet  HWaddr 00:1b:21:b7:21:ea
+           UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
+           RX packets:52 errors:0 dropped:1 overruns:0 frame:0
+           TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
+           collisions:0 txqueuelen:1000
+           RX bytes:6012 (6.0 KB)  TX bytes:6696 (6.6 KB)
+           Memory:b2400000-b2420000
  
- # cat /proc/net/bonding/bond0 
+ # cat /proc/net/bonding/bond0
  Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  
  Bonding Mode: IEEE 802.3ad Dynamic link aggregation
  Transmit Hash Policy: layer2 (0)
  MII Status: up
  MII Polling Interval (ms): 100
  Up Delay (ms): 200
  Down Delay (ms): 0
  
  802.3ad info
  LACP rate: fast
  Aggregator selection policy (ad_select): stable
  Active Aggregator Info:
-         Aggregator ID: 1
-         Number of ports: 2
-         Actor Key: 17
-         Partner Key: 24
-         Partner Mac Address: 00:04:96:18:54:d5
+         Aggregator ID: 1
+         Number of ports: 2
+         Actor Key: 17
+         Partner Key: 24
+         Partner Mac Address: 00:04:96:18:54:d5
  
  Slave Interface: eth2
  MII Status: up
  Speed: 1000 Mbps
  Duplex: full
  Link Failure Count: 0
  Permanent HW addr: 00:1b:21:b7:21:ea
  Aggregator ID: 1
  Slave queue ID: 0
  
  Slave Interface: eth3
  MII Status: up
  Speed: 1000 Mbps
  Duplex: full
  Link Failure Count: 0
  Permanent HW addr: 00:1b:21:b7:21:eb
  Aggregator ID: 1
  Slave queue ID: 0
  
- # lspci -vv
- ...
- 0a:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network 
Connection (rev 01)
-       Subsystem: Intel Corporation Gigabit ET Dual Port Server Adapter
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 64 bytes
-       Interrupt: pin A routed to IRQ 30
-       Region 0: Memory at b2420000 (32-bit, non-prefetchable) [size=128K]
-       Region 1: Memory at b2000000 (32-bit, non-prefetchable) [size=4M]
-       Region 2: I/O ports at 2020 [size=32]
-       Region 3: Memory at b24c4000 (32-bit, non-prefetchable) [size=16K]
-       Expansion ROM at b2800000 [disabled] [size=4M]
-       Capabilities: [40] Power Management version 3
-               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
-       Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
-               Address: 0000000000000000  Data: 0000
-               Masking: 00000000  Pending: 00000000
-       Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
-               Vector table: BAR=3 offset=00000000
-               PBA: BAR=3 offset=00002000
-       Capabilities: [a0] Express (v2) Endpoint, MSI 00
-               DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
-                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
-               DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
-                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
-                       MaxPayload 256 bytes, MaxReadReq 512 bytes
-               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
TransPend-
-               LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency 
L0 <4us, L1 <64us
-                       ClockPM- Surprise- LLActRep- BwNot-
-               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
-                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-               LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
-               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
-               DevCtl2: Completion Timeout: 4s to 13s, TimeoutDis-
-               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
SpeedDis-, Selectable De-emphasis: -6dB
-                        Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
-                        Compliance De-emphasis: -6dB
-               LnkSta2: Current De-emphasis Level: -6dB
-       Capabilities: [100 v1] Advanced Error Reporting
-               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
-               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
-               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
-               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
-               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
-               AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
-       Capabilities: [140 v1] Device Serial Number 00-1b-21-ff-ff-b7-21-ea
-       Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
-               ARICap: MFVC- ACS-, Next Function: 1
-               ARICtl: MFVC- ACS-, Function Group: 0
-       Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
-               IOVCap: Migration-, Interrupt Message Number: 000
-               IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
-               IOVSta: Migration-
-               Initial VFs: 8, Total VFs: 8, Number of VFs: 8, Function 
Dependency Link: 00
-               VF offset: 128, stride: 2, Device ID: 10ca
-               Supported Page Size: 00000553, System Page Size: 00000001
-               Region 0: Memory at 00000000b2440000 (64-bit, non-prefetchable)
-               Region 3: Memory at 00000000b2460000 (64-bit, non-prefetchable)
-               VF Migration: offset: 00000000, BIR: 0
-       Kernel driver in use: igb
-       Kernel modules: igb
- 
- 0a:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network 
Connection (rev 01)
-       Subsystem: Intel Corporation Gigabit ET Dual Port Server Adapter
-       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
-       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
-       Latency: 0, Cache Line Size: 64 bytes
-       Interrupt: pin B routed to IRQ 37
-       Region 0: Memory at b2400000 (32-bit, non-prefetchable) [size=128K]
-       Region 1: Memory at b1c00000 (32-bit, non-prefetchable) [size=4M]
-       Region 2: I/O ports at 2000 [size=32]
-       Region 3: Memory at b24c0000 (32-bit, non-prefetchable) [size=16K]
-       Expansion ROM at b2c00000 [disabled] [size=4M]
-       Capabilities: [40] Power Management version 3
-               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
-               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
-       Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
-               Address: 0000000000000000  Data: 0000
-               Masking: 00000000  Pending: 00000000
-       Capabilities: [70] MSI-X: Enable+ Count=10 Masked-
-               Vector table: BAR=3 offset=00000000
-               PBA: BAR=3 offset=00002000
-       Capabilities: [a0] Express (v2) Endpoint, MSI 00
-               DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
-                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
-               DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
-                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
-                       MaxPayload 256 bytes, MaxReadReq 512 bytes
-               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ 
TransPend-
-               LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency 
L0 <4us, L1 <64us
-                       ClockPM- Surprise- LLActRep- BwNot-
-               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
-                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-               LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
-               DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
-               DevCtl2: Completion Timeout: 4s to 13s, TimeoutDis-
-               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
SpeedDis-, Selectable De-emphasis: -6dB
-                        Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
-                        Compliance De-emphasis: -6dB
-               LnkSta2: Current De-emphasis Level: -6dB
-       Capabilities: [100 v1] Advanced Error Reporting
-               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
-               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
-               UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
-               CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
-               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
-               AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
-       Capabilities: [140 v1] Device Serial Number 00-1b-21-ff-ff-b7-21-ea
-       Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
-               ARICap: MFVC- ACS-, Next Function: 0
-               ARICtl: MFVC- ACS-, Function Group: 0
-       Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
-               IOVCap: Migration-, Interrupt Message Number: 000
-               IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
-               IOVSta: Migration-
-               Initial VFs: 8, Total VFs: 8, Number of VFs: 8, Function 
Dependency Link: 01
-               VF offset: 128, stride: 2, Device ID: 10ca
-               Supported Page Size: 00000553, System Page Size: 00000001
-               Region 0: Memory at 00000000b2480000 (64-bit, non-prefetchable)
-               Region 3: Memory at 00000000b24a0000 (64-bit, non-prefetchable)
-               VF Migration: offset: 00000000, BIR: 0
-       Kernel driver in use: igb
-       Kernel modules: igb
  ...
  
  # ethtool -k bond0
  Offload parameters for bond0:
  rx-checksumming: on
  tx-checksumming: on
  scatter-gather: on
  tcp-segmentation-offload: on
  udp-fragmentation-offload: off
  generic-segmentation-offload: on
  generic-receive-offload: on
  large-receive-offload: off
  rx-vlan-offload: on
  tx-vlan-offload: on
  ntuple-filters: off
  receive-hashing: off
  
  # ethtool -i bond0
  driver: bonding
  version: 3.7.1
  firmware-version: 2
- bus-info: 
+ bus-info:
  supports-statistics: no
  supports-test: no
  supports-eeprom-access: no
  supports-register-dump: no
- --- 
+ ---
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  Architecture: i386
  CRDA: Error: [Errno 2] No such file or directory
  Card0.Amixer.info:
-  Card hw:0 'Audigy2'/'SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 
0xb800, irq 21'
-    Mixer name : 'SigmaTel STAC9750,51'
-    Components : 'AC97a:83847650'
-    Controls      : 211
-    Simple ctrls  : 46
+  Card hw:0 'Audigy2'/'SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 
0xb800, irq 21'
+    Mixer name : 'SigmaTel STAC9750,51'
+    Components : 'AC97a:83847650'
+    Controls      : 211
+    Simple ctrls  : 46
  DistroRelease: Ubuntu 10.04
  HibernationDevice: RESUME=UUID=72a255fb-d7ef-43e8-b41d-a64dfa2e0d93
  InstallationMedia: Ubuntu 10.04.2 LTS "Lucid Lynx" - Release i386 (20110211.3)
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic 
root=UUID=86b85e0a-4cfc-452e-8944-add406605f60 ro quiet splash
  ProcEnviron:
-  LANG=en_US.utf8
-  SHELL=/bin/zsh
+  LANG=en_US.utf8
+  SHELL=/bin/zsh
  ProcVersionSignature: Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12
  Regression: No
  RelatedPackageVersions: linux-firmware 1.34.7
  Reproducible: Yes
  RfKill:
-  
+ 
  Tags: lucid networking needs-upstream-testing
  Uname: Linux 2.6.32-28-generic i686
  UserGroups: adm admin cdrom dialout libvirtd lpadmin plugdev sambashare
  dmi.bios.date: 02/07/2005
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: WP87510A.86B.0059.P18.0502071117
  dmi.board.name: S875WP1
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAC28366-305
  dmi.chassis.type: 2
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrWP87510A.86B.0059.P18.0502071117:bd02/07/2005:svn:pn:pvr:rvnIntelCorporation:rnS875WP1:rvrAAC28366-305:cvn:ct2:cvr:
- --- 
+ ---
  AlsaDevices:
-  total 0
-  crw-rw---- 1 root audio 116,  1 2011-11-17 06:29 seq
-  crw-rw---- 1 root audio 116, 33 2011-11-17 06:29 timer
+  total 0
+  crw-rw---- 1 root audio 116,  1 2011-11-17 06:29 seq
+  crw-rw---- 1 root audio 116, 33 2011-11-17 06:29 timer
  AplayDevices: Error: [Errno 2] No such file or directory
  ApportVersion: 1.23-0ubuntu3
  Architecture: amd64
  ArecordDevices: Error: [Errno 2] No such file or directory
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 11.10
  HibernationDevice: RESUME=UUID=372c7fdc-eb4c-42e0-8cf9-de4b6434a6eb
  InstallationMedia: Ubuntu-Server 11.10 "Oneiric Ocelot" - Release amd64 
(20111011)
  MachineType: Intel Corporation S5520UR
  Package: linux (not installed)
  PciMultimedia:
-  
+ 
  ProcEnviron:
-  LANG=en_US.UTF-8
-  SHELL=/usr/bin/zsh
+  LANG=en_US.UTF-8
+  SHELL=/usr/bin/zsh
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.0.0-12-server 
root=/dev/mapper/hostname-lv_root ro crashkernel=384M-2G:64M,2G-:128M 
console=tty0 console=ttyS0,9600n8
  ProcVersionSignature: Ubuntu 3.0.0-12.20-server 3.0.4
  RelatedPackageVersions:
-  linux-restricted-modules-3.0.0-12-server N/A
-  linux-backports-modules-3.0.0-12-server  N/A
-  linux-firmware                           1.60
+  linux-restricted-modules-3.0.0-12-server N/A
+  linux-backports-modules-3.0.0-12-server  N/A
+  linux-firmware                           1.60
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  oneiric
  Uname: Linux 3.0.0-12-server x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm admin cdrom dialout libvirtd lpadmin plugdev sambashare
  dmi.bios.date: 08/23/2011
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: S5500.86B.01.00.0059.082320111421
  dmi.board.asset.tag: ....................
  dmi.board.name: S5520UR
  dmi.board.vendor: Intel Corporation
  dmi.board.version: E22554-752
  dmi.chassis.asset.tag: ....................
  dmi.chassis.type: 23
  dmi.chassis.vendor: ...............................
  dmi.chassis.version: ..................
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrS5500.86B.01.00.0059.082320111421:bd08/23/2011:svnIntelCorporation:pnS5520UR:pvr....................:rvnIntelCorporation:rnS5520UR:rvrE22554-752:cvn...............................:ct23:cvr..................:
  dmi.product.name: S5520UR
  dmi.product.version: ....................
  dmi.sys.vendor: Intel Corporation

** Tags removed: bonding
** Tags added: lucid

** Tags added: kernel-net

** Changed in: linux (Ubuntu)
       Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/890475

Title:
  bond interface showing dropped packets

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/890475/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to