I've just run into this under Feisty as well. After having read
somewhere on the net that someone got it to work with ndiswrapper I have
tried that, too, but failed. I believe to have set everything back as it
was and would be delighted if we could go through this and see if we can
get it fixed once, for all, for everybody. If you insist, I'll reinstall
Feisty and start from a clean sheet.
> iwconfig reports:
lo no wireless extensions.
eth0 no wireless extensions.
ra0 RT2500 Wireless ESSID:""
Mode:Managed Frequency=2.412 GHz Bit Rate:11 Mb/s Tx-Power:0 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=0/100 Signal level=-120 dBm Noise level:-200 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> iwlist ra0 scan
ra0 Scan completed :
Cell 01 - Address: 00:16:CE:8B:DA:8D
Mode:Managed
ESSID:"techconcierge.co.uk"
Encryption key:on
Channel:1
Quality:0/100 Signal level:-74 dBm Noise level:-200 dBm
Cell 02 - Address: 00:16:CF:2D:80:B1
Mode:Managed
ESSID:"Livebox-3D00"
Encryption key:on
Channel:1
Quality:0/100 Signal level:-77 dBm Noise level:-199 dBm
Cell 03 - Address: 00:0F:3D:A6:85:B2
Mode:Managed
ESSID:"G604T_WIRELESS"
Encryption key:off
Channel:11
Quality:0/100 Signal level:-27 dBm Noise level:-200 dBm
Cell 04 - Address: 00:01:38:8D:E8:E1
Mode:Managed
ESSID:"zoom"
Encryption key:on
Channel:10
Quality:0/100 Signal level:-88 dBm Noise level:-197 dBm
Which is interesting, so it does work to some extent.
I haven't knowingly done anything to /etc/network/interfaces:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
auto eth1
iface eth1 inet dhcp
auto eth2
iface eth2 inet dhcp
auto ath0
iface ath0 inet dhcp
auto wlan0
iface wlan0 inet dhcp
When I remove the card from the computer and put it back in, nothing happens
(no lights on), when I do it a second time, the lights come on and
/var/log/daemon.log reports:
Jun 23 02:38:58 ouattara NetworkManager: <debug info>^I[1182562738.301779]
nm_hal_device_added (): New device added (hal udi is
'/org/freedesktop/Hal/devices/pci_1814_201').
Jun 23 02:38:58 ouattara NetworkManager: <debug info>^I[1182562738.365347]
nm_hal_device_added (): New device added (hal udi is
'/org/freedesktop/Hal/devices/net_00_13_d3_82_66_96').
Jun 23 02:38:58 ouattara NetworkManager: <information>^Ira0: Device is
fully-supported using driver 'rt2500'.
Jun 23 02:38:58 ouattara NetworkManager: <information>^Inm_device_init():
waiting for device's worker thread to start
Jun 23 02:38:58 ouattara NetworkManager: <information>^Inm_device_init():
device's worker thread started, continuing.
Jun 23 02:38:58 ouattara NetworkManager: <information>^INow managing wireless
(802.11) device 'ra0'.
Jun 23 02:38:58 ouattara NetworkManager: <information>^IDeactivating device ra0.
--
MSI CB54G2 PCMCIA WiFi card is not working
https://bugs.launchpad.net/bugs/79296
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
