I followed all of the instructions, and it still happens
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-030500-generic (apw@gomeisa) (gcc version
4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201207211835 SMP Sat Jul 21 22:35:55
UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-3.5.0-030500-generic
root=UUID=d1b86751-29b4-4068-bebb-3d662aa6d99b ro rootflags=subvol=@ quiet
splash xbmc=autostart vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fedffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fee0000-0x000000007fee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fee3000-0x000000007feeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N-SLI DELUXE,
BIOS ASUS M2N-SLI DELUXE ACPI BIOS Revision 5001 02/04/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7fee0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 2047M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM:
0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f5a40-0x000f5a4f] mapped at
[ffff8800000f5a40]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x7fedffff]
[ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M
[ 0.000000] [mem 0x7fe00000-0x7fedffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x7fedffff @ [mem
0x1fbfd000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x364d8000-0x37263fff]
[ 0.000000] ACPI: RSDP 00000000000f7a80 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 000000007fee3100 0003C (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007feea640 000F4 (v03 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007fee3280 0735E (v01 NVIDIA AWRDACPI 00001000
MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007fee0000 00040
[ 0.000000] ACPI: MCFG 000000007feea900 0003C (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: APIC 000000007feea780 00098 (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fedffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fedffff]
[ 0.000000] NODE_DATA [mem 0x7fedc000-0x7fedffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD ->
[ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7fedffff]
[ 0.000000] On node 0 totalpages: 523887
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8124 pages used for memmap
[ 0.000000] DMA32 zone: 511780 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x7ff00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s83456 r8192
d23040 u524288
[ 0.000000] pcpu-alloc: s83456 r8192 d23040 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 515693
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line:
BOOT_IMAGE=/@/boot/vmlinuz-3.5.0-030500-generic
root=UUID=d1b86751-29b4-4068-bebb-3d662aa6d99b ro rootflags=subvol=@ quiet
splash xbmc=autostart vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 400000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2032608k/2096000k available (6751k kernel code, 452k
absent, 62940k reserved, 6415k data, 936k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2411.063 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008006] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4822.12 BogoMIPS (lpj=9644252)
[ 0.008009] pid_max: default: 32768 minimum: 301
[ 0.008035] Security Framework initialized
[ 0.008050] AppArmor: AppArmor initialized
[ 0.008259] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012250] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012718] Mount-cache hash table entries: 256
[ 0.012931] Initializing cgroup subsys cpuacct
[ 0.012934] Initializing cgroup subsys memory
[ 0.012944] Initializing cgroup subsys devices
[ 0.012946] Initializing cgroup subsys freezer
[ 0.012948] Initializing cgroup subsys blkio
[ 0.012950] Initializing cgroup subsys perf_event
[ 0.012977] tseg: 007ff00000
[ 0.012979] CPU: Physical Processor ID: 0
[ 0.012980] CPU: Processor Core ID: 0
[ 0.012982] mce: CPU supports 5 MCE banks
[ 0.012990] LVT offset 0 assigned for vector 0xf9
[ 0.012994] using AMD E400 aware idle routine
[ 0.014517] ACPI: Core revision 20120320
[ 0.019504] ftrace: allocating 27398 entries in 108 pages
[ 0.028594] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.069920] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 0.072003] Performance Events: AMD PMU driver.
[ 0.072003] ... version: 0
[ 0.072003] ... bit width: 48
[ 0.072003] ... generic registers: 4
[ 0.072003] ... value mask: 0000ffffffffffff
[ 0.072003] ... max period: 00007fffffffffff
[ 0.072003] ... fixed-purpose events: 0
[ 0.072003] ... event mask: 000000000000000f
[ 0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.072003] Booting Node 0, Processors #1
[ 0.156093] Brought up 2 CPUs
[ 0.156096] Total of 2 processors activated (9644.66 BogoMIPS).
[ 0.156562] devtmpfs: initialized
[ 0.157459] EVM: security.selinux
[ 0.157460] EVM: security.SMACK64
[ 0.157462] EVM: security.capability
[ 0.157477] PM: Registering ACPI NVS region [mem 0x7fee0000-0x7fee2fff]
(12288 bytes)
[ 0.157477] dummy:
[ 0.157477] RTC time: 12:22:45, date: 08/07/12
[ 0.157477] NET: Registered protocol family 16
[ 0.157477] node 0 link 0: io port [b000, ffff]
[ 0.157477] TOM: 0000000080000000 aka 2048M
[ 0.157477] node 0 link 0: mmio [a0000, bffff]
[ 0.157477] node 0 link 0: mmio [80000000, efffffff]
[ 0.157477] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.157477] node 0 link 0: mmio [f0000000, f03fffff]
[ 0.157477] bus: [00, 03] on node 0 link 0
[ 0.157477] bus: 00 [io 0x0000-0xffff]
[ 0.157477] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.157477] bus: 00 [mem 0x80000000-0xf3ffffff]
[ 0.157477] bus: 00 [mem 0xf4000000-0xfcffffffff]
[ 0.157477] ACPI: bus type pci registered
[ 0.157477] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.157477] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.161789] PCI: Using configuration type 1 for base access
[ 0.162688] bio: create slab <bio-0> at 0
[ 0.162688] ACPI: Added _OSI(Module Device)
[ 0.162688] ACPI: Added _OSI(Processor Device)
[ 0.162688] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.162688] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.164089] ACPI: EC: Look up EC in DSDT
[ 0.169077] ACPI: Interpreter enabled
[ 0.169082] ACPI: (supports S0 S3 S4 S5)
[ 0.169102] ACPI: Using IOAPIC for interrupt routing
[ 0.174295] ACPI: No dock devices found.
[ 0.174302] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.174361] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.174438] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.174441] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.174443] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.174446] pci_root PNP0A08:00: host bridge window [mem
0x000c0000-0x000dffff]
[ 0.174448] pci_root PNP0A08:00: host bridge window [mem
0x7ff00000-0xfebfffff]
[ 0.174483] PCI host bridge to bus 0000:00
[ 0.174486] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.174488] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.174491] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.174494] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.174496] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff]
[ 0.174521] pci 0000:00:00.0: [10de:0369] type 00 class 0x050000
[ 0.174699] pci 0000:00:01.0: [10de:0360] type 00 class 0x060100
[ 0.174721] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.174736] pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500
[ 0.174748] pci 0000:00:01.1: reg 10: [io 0xff00-0xff3f]
[ 0.174764] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.174770] pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.174799] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.174820] pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310
[ 0.174829] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.174857] pci 0000:00:02.0: supports D1 D2
[ 0.174860] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174872] pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320
[ 0.174880] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.174910] pci 0000:00:02.1: supports D1 D2
[ 0.174912] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174930] pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a
[ 0.174946] pci 0000:00:04.0: reg 20: [io 0xfc00-0xfc0f]
[ 0.174970] pci 0000:00:05.0: [10de:037f] type 00 class 0x010185
[ 0.174978] pci 0000:00:05.0: reg 10: [io 0x09f0-0x09f7]
[ 0.174983] pci 0000:00:05.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.174987] pci 0000:00:05.0: reg 18: [io 0x0970-0x0977]
[ 0.174992] pci 0000:00:05.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.174996] pci 0000:00:05.0: reg 20: [io 0xf700-0xf70f]
[ 0.175001] pci 0000:00:05.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[ 0.175029] pci 0000:00:05.1: [10de:037f] type 00 class 0x010185
[ 0.175037] pci 0000:00:05.1: reg 10: [io 0x09e0-0x09e7]
[ 0.175041] pci 0000:00:05.1: reg 14: [io 0x0be0-0x0be3]
[ 0.175046] pci 0000:00:05.1: reg 18: [io 0x0960-0x0967]
[ 0.175050] pci 0000:00:05.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.175055] pci 0000:00:05.1: reg 20: [io 0xf200-0xf20f]
[ 0.175060] pci 0000:00:05.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.175087] pci 0000:00:05.2: [10de:037f] type 00 class 0x010185
[ 0.175095] pci 0000:00:05.2: reg 10: [io 0xf100-0xf107]
[ 0.175100] pci 0000:00:05.2: reg 14: [io 0xf000-0xf003]
[ 0.175104] pci 0000:00:05.2: reg 18: [io 0xef00-0xef07]
[ 0.175109] pci 0000:00:05.2: reg 1c: [io 0xee00-0xee03]
[ 0.175113] pci 0000:00:05.2: reg 20: [io 0xed00-0xed0f]
[ 0.175118] pci 0000:00:05.2: reg 24: [mem 0xfe02b000-0xfe02bfff]
[ 0.175148] pci 0000:00:06.0: [10de:0370] type 01 class 0x060401
[ 0.175178] pci 0000:00:06.1: [10de:0371] type 00 class 0x040300
[ 0.175188] pci 0000:00:06.1: reg 10: [mem 0xfe024000-0xfe027fff]
[ 0.175222] pci 0000:00:06.1: PME# supported from D3hot D3cold
[ 0.175243] pci 0000:00:08.0: [10de:0373] type 00 class 0x068000
[ 0.175254] pci 0000:00:08.0: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.175258] pci 0000:00:08.0: reg 14: [io 0xec00-0xec07]
[ 0.175263] pci 0000:00:08.0: reg 18: [mem 0xfe029000-0xfe0290ff]
[ 0.175267] pci 0000:00:08.0: reg 1c: [mem 0xfe028000-0xfe02800f]
[ 0.175297] pci 0000:00:08.0: supports D1 D2
[ 0.175300] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175321] pci 0000:00:0e.0: [10de:0375] type 01 class 0x060400
[ 0.175347] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175362] pci 0000:00:0f.0: [10de:0377] type 01 class 0x060400
[ 0.175387] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.175404] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.175423] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.175438] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.175454] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.175509] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.175514] pci 0000:00:06.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.175516] pci 0000:00:06.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.175519] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.175521] pci 0000:00:06.0: bridge window [mem 0x000c0000-0x000dffff]
(subtractive decode)
[ 0.175524] pci 0000:00:06.0: bridge window [mem 0x7ff00000-0xfebfffff]
(subtractive decode)
[ 0.175557] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
[ 0.175616] pci 0000:02:00.0: reg 24: [mem 0xfdefe000-0xfdefffff]
[ 0.175626] pci 0000:02:00.0: reg 30: [mem 0xfdee0000-0xfdeeffff pref]
[ 0.175661] pci 0000:02:00.0: PME# supported from D3hot
[ 0.175686] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[ 0.175703] pci 0000:02:00.1: reg 10: [io 0xdc00-0xdc07]
[ 0.175713] pci 0000:02:00.1: reg 14: [io 0xd800-0xd803]
[ 0.175723] pci 0000:02:00.1: reg 18: [io 0xd400-0xd407]
[ 0.175733] pci 0000:02:00.1: reg 1c: [io 0xd000-0xd003]
[ 0.175743] pci 0000:02:00.1: reg 20: [io 0xcc00-0xcc0f]
[ 0.175800] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.175810] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.175813] pci 0000:00:0e.0: bridge window [io 0xc000-0xdfff]
[ 0.175816] pci 0000:00:0e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.175846] pci 0000:03:00.0: [10de:0641] type 00 class 0x030000
[ 0.175855] pci 0000:03:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.175864] pci 0000:03:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.175873] pci 0000:03:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.175880] pci 0000:03:00.0: reg 24: [io 0xbc00-0xbc7f]
[ 0.175886] pci 0000:03:00.0: reg 30: [mem 0xfbf80000-0xfbffffff pref]
[ 0.180024] pci 0000:00:0f.0: PCI bridge to [bus 03-03]
[ 0.180028] pci 0000:00:0f.0: bridge window [io 0xb000-0xbfff]
[ 0.180031] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.180034] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.180042] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.180216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.180352] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.180356] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned
control mask: 0x1d
[ 0.180357] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.200648] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.200695] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.200740] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.200783] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.200827] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.200873] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
[ 0.200918] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15)
[ 0.200961] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.201005] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.201049] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.201094] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.201138] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.201183] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.201226] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.201273] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.201317] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.201361] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 0.201406] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.201458] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.201509] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
[ 0.201594] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.201669] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.201742] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.201816] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.201889] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.201962] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.202035] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.202108] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.202182] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.202256] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.202331] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
[ 0.202405] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.202483] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.202557] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.202632] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.202707] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.202782] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.202860] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.202938] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.203013] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.203096] vgaarb: device added:
PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.203096] vgaarb: loaded
[ 0.203096] vgaarb: bridge control possible 0000:03:00.0
[ 0.203096] SCSI subsystem initialized
[ 0.203096] libata version 3.00 loaded.
[ 0.203096] ACPI: bus type usb registered
[ 0.203096] usbcore: registered new interface driver usbfs
[ 0.203096] usbcore: registered new interface driver hub
[ 0.203096] usbcore: registered new device driver usb
[ 0.203096] PCI: Using ACPI for IRQ routing
[ 0.204832] PCI: pci_cache_line_size set to 64 bytes
[ 0.204896] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.204899] e820: reserve RAM buffer [mem 0x7fee0000-0x7fffffff]
[ 0.205006] NetLabel: Initializing
[ 0.205008] NetLabel: domain hash size = 128
[ 0.205009] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.205022] NetLabel: unlabeled traffic allowed by default
[ 0.213379] AppArmor: AppArmor Filesystem Enabled
[ 0.213414] pnp: PnP ACPI init
[ 0.213434] ACPI: bus type pnp registered
[ 0.213557] pnp 00:00: [bus 00-ff]
[ 0.213560] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.213563] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.213565] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.213568] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.213573] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.213575] pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
[ 0.213654] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.213673] pnp 00:01: [io 0x1000-0x107f]
[ 0.213676] pnp 00:01: [io 0x1080-0x10ff]
[ 0.213678] pnp 00:01: [io 0x1400-0x147f]
[ 0.213680] pnp 00:01: [io 0x1480-0x14ff]
[ 0.213683] pnp 00:01: [io 0x1800-0x187f]
[ 0.213685] pnp 00:01: [io 0x1880-0x18ff]
[ 0.213740] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.213742] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 0.213745] system 00:01: [io 0x1400-0x147f] has been reserved
[ 0.213748] system 00:01: [io 0x1480-0x14ff] has been reserved
[ 0.213751] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.213754] system 00:01: [io 0x1880-0x18ff] has been reserved
[ 0.213757] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.213820] pnp 00:02: [io 0x0010-0x001f]
[ 0.213823] pnp 00:02: [io 0x0022-0x003f]
[ 0.213825] pnp 00:02: [io 0x0044-0x005f]
[ 0.213828] pnp 00:02: [io 0x0062-0x0063]
[ 0.213830] pnp 00:02: [io 0x0065-0x006f]
[ 0.213833] pnp 00:02: [io 0x0074-0x007f]
[ 0.213835] pnp 00:02: [io 0x0091-0x0093]
[ 0.213838] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.213840] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.213843] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.213846] pnp 00:02: [io 0x0800-0x087f]
[ 0.213848] pnp 00:02: [io 0x0290-0x0297]
[ 0.213904] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.213907] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.213909] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.213913] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.213924] pnp 00:03: [dma 4]
[ 0.213927] pnp 00:03: [io 0x0000-0x000f]
[ 0.213929] pnp 00:03: [io 0x0080-0x0090]
[ 0.213932] pnp 00:03: [io 0x0094-0x009f]
[ 0.213934] pnp 00:03: [io 0x00c0-0x00df]
[ 0.213963] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.214012] pnp 00:04: [io 0x0070-0x0073]
[ 0.214026] pnp 00:04: [irq 8]
[ 0.214054] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.214063] pnp 00:05: [io 0x0061]
[ 0.214091] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.214100] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.214108] pnp 00:06: [irq 13]
[ 0.214136] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.215107] pnp 00:07: [mem 0xf0000000-0xf3ffffff]
[ 0.215167] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.215170] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.215282] pnp 00:08: [mem 0x000d2800-0x000d3fff]
[ 0.215285] pnp 00:08: [mem 0x000f0000-0x000f7fff]
[ 0.215287] pnp 00:08: [mem 0x000f8000-0x000fbfff]
[ 0.215289] pnp 00:08: [mem 0x000fc000-0x000fffff]
[ 0.215292] pnp 00:08: [mem 0xfefff000-0xfefff0ff]
[ 0.215294] pnp 00:08: [mem 0x7fee0000-0x7fefffff]
[ 0.215297] pnp 00:08: [mem 0xffff0000-0xffffffff]
[ 0.215299] pnp 00:08: [mem 0x00000000-0x0009ffff]
[ 0.215301] pnp 00:08: [mem 0x00100000-0x7fedffff]
[ 0.215304] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.215306] pnp 00:08: [mem 0xfee00000-0xfeefffff]
[ 0.215311] pnp 00:08: [mem 0xfefff000-0xfeffffff]
[ 0.215313] pnp 00:08: [mem 0xfff80000-0xfff80fff]
[ 0.215316] pnp 00:08: [mem 0xfff90000-0xfffbffff]
[ 0.215318] pnp 00:08: [mem 0xfffed000-0xfffeffff]
[ 0.215386] system 00:08: [mem 0x000d2800-0x000d3fff] has been reserved
[ 0.215390] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.215392] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.215395] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.215398] system 00:08: [mem 0xfefff000-0xfefff0ff] has been reserved
[ 0.215401] system 00:08: [mem 0x7fee0000-0x7fefffff] could not be reserved
[ 0.215404] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.215407] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.215410] system 00:08: [mem 0x00100000-0x7fedffff] could not be reserved
[ 0.215413] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.215416] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.215420] system 00:08: [mem 0xfefff000-0xfeffffff] could not be reserved
[ 0.215422] system 00:08: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.215425] system 00:08: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.215428] system 00:08: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.215431] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.215441] pnp: PnP ACPI: found 9 devices
[ 0.215442] ACPI: ACPI bus type pnp unregistered
[ 0.221830] Switching to clocksource acpi_pm
[ 0.221881] pci 0000:00:06.0: PCI bridge to [bus 01-01]
[ 0.221887] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.221890] pci 0000:00:0e.0: bridge window [io 0xc000-0xdfff]
[ 0.221894] pci 0000:00:0e.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.221898] pci 0000:00:0f.0: PCI bridge to [bus 03-03]
[ 0.221900] pci 0000:00:0f.0: bridge window [io 0xb000-0xbfff]
[ 0.221903] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.221907] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.221915] pci 0000:00:06.0: setting latency timer to 64
[ 0.221922] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.221924] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.221927] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.221929] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.221932] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff]
[ 0.221935] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.221937] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.221940] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.221942] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.221945] pci_bus 0000:01: resource 8 [mem 0x7ff00000-0xfebfffff]
[ 0.221947] pci_bus 0000:02: resource 0 [io 0xc000-0xdfff]
[ 0.221950] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.221952] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.221955] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.221957] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit
pref]
[ 0.221996] NET: Registered protocol family 2
[ 0.222092] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.222763] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 0.222763] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.223015] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.223018] TCP: reno registered
[ 0.223027] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.223053] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.223145] NET: Registered protocol family 1
[ 0.223364] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.296211] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.296293] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 0.296340] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 0.296387] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 0.296432] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 0.296482] pci 0000:00:06.1: Enabling HT MSI Mapping
[ 0.296539] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.296597] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.296659] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 0.296686] pci 0000:03:00.0: Boot video device
[ 0.296688] PCI: CLS 32 bytes, default 64
[ 0.296740] Trying to unpack rootfs image as initramfs...
[ 0.580518] Freeing initrd memory: 13872k freed
[ 0.587894] audit: initializing netlink socket (disabled)
[ 0.587907] type=2000 audit(1344342165.584:1): initialized
[ 0.612336] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.614232] VFS: Disk quotas dquot_6.5.2
[ 0.614284] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.614837] fuse init (API version 7.19)
[ 0.614938] msgmni has been set to 3997
[ 0.615530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 0.615577] io scheduler noop registered
[ 0.615579] io scheduler deadline registered
[ 0.615613] io scheduler cfq registered (default)
[ 0.615790] pcieport 0000:00:0e.0: irq 40 for MSI/MSI-X
[ 0.615898] pcieport 0000:00:0f.0: irq 41 for MSI/MSI-X
[ 0.615975] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.615997] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.616166] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.616171] ACPI: Power Button [PWRB]
[ 0.616225] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.616228] ACPI: Power Button [PWRF]
[ 0.616274] ACPI: Fan [FAN] (on)
[ 0.621341] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no
elements (empty) (20120320/nspredef-463)
[ 0.621347] ACPI: [Package] has zero elements (ffff880078d1a680)
[ 0.621351] ACPI: Invalid passive threshold
[ 0.621593] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.621595] ACPI: Thermal Zone [THRM] (40 C)
[ 0.621629] GHES: HEST is not enabled!
[ 0.621712] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.623306] Linux agpgart interface v0.103
[ 0.624944] brd: module loaded
[ 0.625789] loop: module loaded
[ 0.625967] ahci 0000:02:00.0: version 3.0
[ 0.626156] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.640045] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3
impl SATA mode
[ 0.640048] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.640432] scsi0 : ahci
[ 0.640538] scsi1 : ahci
[ 0.640584] ata1: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100
irq 16
[ 0.640587] ata2: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180
irq 16
[ 0.640751] pata_acpi 0000:00:04.0: setting latency timer to 64
[ 0.641032] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 0.641069] pata_acpi 0000:00:05.0: setting latency timer to 64
[ 0.641277] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 0.641302] pata_acpi 0000:00:05.1: setting latency timer to 64
[ 0.641507] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[ 0.641526] pata_acpi 0000:00:05.2: setting latency timer to 64
[ 0.641597] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.641738] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 0.641764] pata_acpi 0000:02:00.1: setting latency timer to 64
[ 0.642298] Fixed MDIO Bus: probed
[ 0.642345] tun: Universal TUN/TAP device driver, 1.6
[ 0.642347] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.642414] PPP generic driver version 2.4.2
[ 0.642475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.642547] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.642551] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.642560] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 1
[ 0.642583] ehci_hcd 0000:00:02.1: debug port 1
[ 0.642590] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
[ 0.642613] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 0.652021] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.652046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.652049] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.652051] usb usb1: Product: EHCI Host Controller
[ 0.652054] usb usb1: Manufacturer: Linux 3.5.0-030500-generic ehci_hcd
[ 0.652056] usb usb1: SerialNumber: 0000:00:02.1
[ 0.652200] hub 1-0:1.0: USB hub found
[ 0.652206] hub 1-0:1.0: 10 ports detected
[ 0.652301] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.652378] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.652382] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.652388] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 2
[ 0.652413] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 0.710023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.710025] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.710027] usb usb2: Product: OHCI Host Controller
[ 0.710029] usb usb2: Manufacturer: Linux 3.5.0-030500-generic ohci_hcd
[ 0.710031] usb usb2: SerialNumber: 0000:00:02.0
[ 0.710142] hub 2-0:1.0: USB hub found
[ 0.710148] hub 2-0:1.0: 10 ports detected
[ 0.710231] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.710286] usbcore: registered new interface driver libusual
[ 0.710318] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.710705] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.710711] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.710818] mousedev: PS/2 mouse device common for all mice
[ 0.710961] rtc_cmos 00:04: RTC can wake from S4
[ 0.711112] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.711142] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.711218] device-mapper: uevent: version 1.0.3
[ 0.711295] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
[email protected]
[ 0.711304] cpuidle: using governor ladder
[ 0.711305] cpuidle: using governor menu
[ 0.711307] EFI Variables Facility v0.08 2004-May-17
[ 0.711564] ashmem: initialized
[ 0.711689] TCP: cubic registered
[ 0.711801] NET: Registered protocol family 10
[ 0.712031] NET: Registered protocol family 17
[ 0.712043] Key type dns_resolver registered
[ 0.712232] PM: Hibernation image not present or could not be loaded.
[ 0.712246] registered taskstats version 1
[ 0.715039] Key type trusted registered
[ 0.717422] Key type encrypted registered
[ 0.720223] Magic number: 8:631:379
[ 0.720336] rtc_cmos 00:04: setting system clock to 2012-08-07 12:22:46 UTC
(1344342166)
[ 0.720390] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
4600+ (2 cpu cores) (version 2.20.00)
[ 0.720401] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects
found.
[ 0.720401] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 0.720427] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.720428] EDD information not available.
[ 0.960049] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.960081] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.961834] Freeing unused kernel memory: 936k freed
[ 0.962189] Write protecting the kernel read-only data: 12288k
[ 0.964044] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 0.967352] Freeing unused kernel memory: 1432k freed
[ 0.971797] Freeing unused kernel memory: 1096k freed
[ 0.993391] udevd[128]: starting version 175
[ 1.011457] Btrfs loaded
[ 1.073582] pata_amd 0000:00:04.0: version 0.4.1
[ 1.073627] pata_amd 0000:00:04.0: setting latency timer to 64
[ 1.073999] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 1.075344] scsi3 : pata_jmicron
[ 1.075437] scsi2 : pata_amd
[ 1.075730] scsi4 : pata_jmicron
[ 1.075776] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd800 bmdma 0xcc00 irq 16
[ 1.075779] ata6: PATA max UDMA/100 cmd 0xd400 ctl 0xd000 bmdma 0xcc08 irq 16
[ 1.077192] scsi5 : pata_amd
[ 1.077625] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.077628] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.080132] sata_nv 0000:00:05.0: version 3.5
[ 1.080150] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 1.080496] sata_nv 0000:00:05.0: setting latency timer to 64
[ 1.080977] scsi6 : sata_nv
[ 1.084079] scsi7 : sata_nv
[ 1.084259] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 21
[ 1.084262] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 21
[ 1.088160] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 1.088562] sata_nv 0000:00:05.1: setting latency timer to 64
[ 1.092050] scsi8 : sata_nv
[ 1.094679] scsi9 : sata_nv
[ 1.094863] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 20
[ 1.094866] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 20
[ 1.097887] usb 1-1: New USB device found, idVendor=05e3, idProduct=0606
[ 1.097893] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.097896] usb 1-1: Product: USB2.0 Hub
[ 1.098326] hub 1-1:1.0: USB hub found
[ 1.098635] hub 1-1:1.0: 4 ports detected
[ 1.099102] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 1.099484] sata_nv 0000:00:05.2: setting latency timer to 64
[ 1.102700] scsi10 : sata_nv
[ 1.104130] scsi11 : sata_nv
[ 1.104304] ata11: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq
23
[ 1.104307] ata12: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq
23
[ 1.108040] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.64.
[ 1.108258] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 1.108266] forcedeth 0000:00:08.0: setting latency timer to 64
[ 1.212032] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 1.395065] ata4: port disabled--ignoring
[ 1.396022] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.404038] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.416025] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.511888] usb 1-3: New USB device found, idVendor=046d, idProduct=0807
[ 1.511891] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 1.511894] usb 1-3: SerialNumber: 351B2D60
[ 1.632441] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr
00:1b:fc:4c:a0:74
[ 1.632447] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit
lnktim msi desc-v3
[ 1.696888] usb 1-1.1: new high-speed USB device number 5 using ehci_hcd
[ 1.708037] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.789888] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0606
[ 1.789891] usb 1-1.1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 1.789894] usb 1-1.1: Product: USB2.0 Hub
[ 1.790302] hub 1-1.1:1.0: USB hub found
[ 1.790637] hub 1-1.1:1.0: 4 ports detected
[ 2.020028] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.224033] usb 2-4: new full-speed USB device number 2 using ohci_hcd
[ 2.439047] usb 2-4: New USB device found, idVendor=0471, idProduct=0815
[ 2.439050] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.439053] usb 2-4: Product: eHome Infrared Transceiver
[ 2.439055] usb 2-4: Manufacturer: Philips
[ 2.439057] usb 2-4: SerialNumber: PH00RZC3
[ 2.488042] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.496216] ata12.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100
[ 2.496220] ata12.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.504201] ata12.00: configured for UDMA/100
[ 2.504374] scsi 11:0:0:0: Direct-Access ATA M4-CT128M4SSD2 000F
PQ: 0 ANSI: 5
[ 2.504575] sd 11:0:0:0: [sda] 250069680 512-byte logical blocks: (128
GB/119 GiB)
[ 2.504637] sd 11:0:0:0: [sda] Write Protect is off
[ 2.504640] sd 11:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.504660] sd 11:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.504921] sd 11:0:0:0: Attached scsi generic sg0 type 0
[ 2.505063] sda: sda1 sda2
[ 2.505328] sd 11:0:0:0: [sda] Attached SCSI disk
[ 2.512901] usb 1-1.1.1: new high-speed USB device number 6 using ehci_hcd
[ 2.552400] device fsid d1b86751-29b4-4068-bebb-3d662aa6d99b devid 1 transid
10862 /dev/sda1
[ 2.560489] device fsid d1b86751-29b4-4068-bebb-3d662aa6d99b devid 1 transid
10862 /dev/disk/by-uuid/d1b86751-29b4-4068-bebb-3d662aa6d99b
[ 2.563661] btrfs: bdev
/dev/disk/by-uuid/d1b86751-29b4-4068-bebb-3d662aa6d99b errs: wr 0, rd 0, flush
0, corrupt 0, gen 0
[ 2.579445] Btrfs detected SSD devices, enabling SSD mode
[ 2.624151] usb 1-1.1.1: New USB device found, idVendor=152e, idProduct=2507
[ 2.624156] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.624159] usb 1-1.1.1: Product: Super Multi Rewriter
[ 2.624161] usb 1-1.1.1: Manufacturer: HLDS Inc.
[ 2.624163] usb 1-1.1.1: SerialNumber: P01061020072621
[ 2.660949] Initializing USB Mass Storage driver...
[ 2.661205] scsi12 : usb-storage 1-1.1.1:1.0
[ 2.661291] usbcore: registered new interface driver usb-storage
[ 2.661293] USB Mass Storage support registered.
[ 2.687917] init: ureadahead main process (362) terminated with status 5
[ 2.696895] usb 1-1.1.3: new low-speed USB device number 7 using ehci_hcd
[ 2.797646] usb 1-1.1.3: New USB device found, idVendor=06a3, idProduct=5f0d
[ 2.797651] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.797654] usb 1-1.1.3: Product: Saitek P2600 Rumble Force Pad
[ 2.797656] usb 1-1.1.3: Manufacturer: Saitek PLC
[ 2.860982] udevd[451]: starting version 175
[ 2.872884] usb 1-1.1.4: new low-speed USB device number 8 using ehci_hcd
[ 2.903211] lp: driver loaded but no devices found
[ 2.956890] usb 1-1.1.4: device descriptor read/64, error -32
[ 3.043735] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 3.043742] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO
conflicts with Region \_SB_.PCI0.SM01 1 (20120320/utaddress-251)
[ 3.043748] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO
conflicts with Region \_SB_.PCI0.SM00 2 (20120320/utaddress-251)
[ 3.043752] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 3.067328] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 3.067436] nv_tco: Watchdog reboot not detected
[ 3.068655] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 3.163640] usb 1-1.1.4: New USB device found, idVendor=1241, idProduct=1037
[ 3.163646] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.163648] usb 1-1.1.4: Product: Wireless TrackballKeyboard
[ 3.163651] usb 1-1.1.4: Manufacturer: FOCUS
[ 3.384306] Linux video capture interface: v2.00
[ 3.389611] k8temp 0000:00:18.3: Temperature readouts might be wrong - check
erratum #141
[ 3.406438] MCE: In-kernel MCE decoding enabled.
[ 3.410487] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.412868] EDAC MC: Ver: 2.1.0
[ 3.419168] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0807)
[ 3.420075] AMD64 EDAC driver v3.4.0
[ 3.429730] EDAC amd64: DRAM ECC disabled.
[ 3.429749] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[ 3.429749] Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
[ 3.429749] (Note that use of the override may cause unknown side effects.)
[ 3.440554] input: UVC Camera (046d:0807) as
/devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input3
[ 3.441418] usbcore: registered new interface driver uvcvideo
[ 3.441422] USB Video Class driver (1.1.1)
[ 3.465508] nvidia: module license 'NVIDIA' taints kernel.
[ 3.465514] Disabling lock debugging due to kernel taint
[ 3.490344] usbcore: registered new interface driver usbhid
[ 3.490352] usbhid: USB HID core driver
[ 3.500298] type=1400 audit(1344363769.277:2): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient" pid=734 comm="apparmor_parser"
[ 3.500779] type=1400 audit(1344363769.277:3): apparmor="STATUS"
operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action"
pid=734 comm="apparmor_parser"
[ 3.501054] type=1400 audit(1344363769.277:4): apparmor="STATUS"
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
pid=734 comm="apparmor_parser"
[ 3.770630] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 3.770643] vgaarb: device changed decodes:
PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.770920] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.35 Fri
Jun 8 00:07:59 PDT 2012
[ 3.775622] microcode: AMD CPU family 0xf not supported
[ 3.802232] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 3.802240] hda_intel: msi for device 1043:81f6 set to 0
[ 3.802272] snd_hda_intel 0000:00:06.1: setting latency timer to 64
[ 3.805045] scsi 12:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-E10L LE07
PQ: 0 ANSI: 0
[ 3.815804] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 3.815822] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.816478] sr 12:0:0:0: Attached scsi CD-ROM sr0
[ 3.816676] sr 12:0:0:0: Attached scsi generic sg1 type 5
[ 3.820185] kvm: Nested Virtualization enabled
[ 3.822396] microcode: AMD CPU family 0xf not supported
[ 3.951566] input: Saitek PLC Saitek P2600 Rumble Force Pad as
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/input/input4
[ 3.952226] hid-generic 0003:06A3:5F0D.0001: input,hidraw0: USB HID v1.10
Joystick [Saitek PLC Saitek P2600 Rumble Force Pad] on
usb-0000:00:02.1-1.1.3/input0
[ 3.953501] input: FOCUS Wireless TrackballKeyboard as
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.0/input/input5
[ 3.955076] hid-generic 0003:1241:1037.0002: input,hidraw1: USB HID v1.10
Keyboard [FOCUS Wireless TrackballKeyboard] on usb-0000:00:02.1-1.1.4/input0
[ 3.955740] input: FOCUS Wireless TrackballKeyboard as
/devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.1/input/input6
[ 3.961555] hid-generic 0003:1241:1037.0003: input,hiddev0,hidraw2: USB HID
v1.10 Mouse [FOCUS Wireless TrackballKeyboard] on usb-0000:00:02.1-1.1.4/input1
[ 4.081490] usbcore: registered new interface driver snd-usb-audio
[ 5.323282] init: udev-fallback-graphics main process (893) terminated with
status 1
[ 11.841127] btrfs: unlinked 1 orphans
[ 11.875062] device fsid d1b86751-29b4-4068-bebb-3d662aa6d99b devid 1 transid
10862 /dev/sda1
[ 11.971619] init: failsafe main process (936) killed by TERM signal
[ 11.987924] init: xbmc-ir-keytable main process (953) terminated with status
255
[ 12.089238] ppdev: user-space parallel port driver
[ 12.134967] Bluetooth: Core ver 2.16
[ 12.134990] NET: Registered protocol family 31
[ 12.134992] Bluetooth: HCI device and connection manager initialized
[ 12.134994] Bluetooth: HCI socket layer initialized
[ 12.134996] Bluetooth: L2CAP socket layer initialized
[ 12.135000] Bluetooth: SCO socket layer initialized
[ 12.167499] type=1400 audit(1344363777.941:5): apparmor="STATUS"
operation="profile_load"
name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1041
comm="apparmor_parser"
[ 12.169434] type=1400 audit(1344363777.945:6): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient" pid=1042
comm="apparmor_parser"
[ 12.169927] type=1400 audit(1344363777.945:7): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1042
comm="apparmor_parser"
[ 12.170200] type=1400 audit(1344363777.945:8): apparmor="STATUS"
operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script"
pid=1042 comm="apparmor_parser"
[ 12.172257] type=1400 audit(1344363777.949:9): apparmor="STATUS"
operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1045
comm="apparmor_parser"
[ 12.172819] type=1400 audit(1344363777.949:10): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/cupsd" pid=1045 comm="apparmor_parser"
[ 12.176956] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.176961] Bluetooth: BNEP filters: protocol multicast
[ 12.181740] Bluetooth: RFCOMM TTY layer initialized
[ 12.181746] Bluetooth: RFCOMM socket layer initialized
[ 12.181748] Bluetooth: RFCOMM ver 1.11
[ 12.213519] type=1400 audit(1344363777.989:11): apparmor="STATUS"
operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1054
comm="apparmor_parser"
[ 12.214102] type=1400 audit(1344363777.989:12): apparmor="STATUS"
operation="profile_replace" name="/usr/sbin/cupsd" pid=1054
comm="apparmor_parser"
[ 12.220350] type=1400 audit(1344363777.997:13): apparmor="STATUS"
operation="profile_load" name="/usr/bin/evince" pid=1048 comm="apparmor_parser"
[ 12.228885] type=1400 audit(1344363778.005:14): apparmor="STATUS"
operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1048
comm="apparmor_parser"
[ 12.248527] forcedeth 0000:00:08.0: irq 42 for MSI/MSI-X
[ 12.248561] forcedeth 0000:00:08.0: eth0: MSI enabled
[ 12.346809] lirc_dev: IR Remote Control driver registered, major 250
[ 12.396046] Registered IR keymap rc-rc6-mce
[ 12.396161] input: Media Center Ed. eHome Infrared Remote Transceiver
(0471:0815) as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/rc/rc0/input7
[ 12.396217] rc0: Media Center Ed. eHome Infrared Remote Transceiver
(0471:0815) as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/rc/rc0
[ 12.409943] IR NEC protocol handler initialized
[ 12.420734] IR RC5(x) protocol handler initialized
[ 12.423534] IR RC6 protocol handler initialized
[ 12.427602] IR JVC protocol handler initialized
[ 12.430682] IR Sony protocol handler initialized
[ 12.440105] IR SANYO protocol handler initialized
[ 12.445335] input: MCE IR Keyboard/Mouse (mceusb) as
/devices/virtual/input/input8
[ 12.447839] IR MCE Keyboard/mouse protocol handler initialized
[ 12.450367] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at
minor = 0
[ 12.450372] IR LIRC bridge handler initialized
[ 12.628062] mceusb 2-4:1.0: Registered Philips eHome Infrared Transceiver
with mce emulator interface version 1
[ 12.628067] mceusb 2-4:1.0: 2 tx ports (0x1 cabled) and 2 rx sensors (0x1
active)
[ 12.628123] usbcore: registered new interface driver mceusb
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/994105
Title:
machine no longer wakes from sleep on 12.04
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/994105/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
