I had a look at your setup logs and noticed the following:
Aug 7 09:46:57 ubuntu kernel: [ 1960.963656] ata3.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Aug 7 09:46:57 ubuntu kernel: [ 1960.963662] ata3.00: BMDMA stat 0x24
Aug 7 09:46:57 ubuntu kernel: [ 1960.963667] ata3.00: failed command: READ DMA
Aug 7 09:46:57 ubuntu kernel: [ 1960.963673] ata3.00: cmd
c8/00:48:e0:db:0f/00:00:00:00:00/e0 tag 0 dma 36864 in
Aug 7 09:46:57 ubuntu kernel: [ 1960.963675] res
51/40:11:17:dc:0f/00:00:00:00:00/e0 Emask 0x9 (media error)
Aug 7 09:46:57 ubuntu kernel: [ 1960.963678] ata3.00: status: { DRDY ERR }
Aug 7 09:46:57 ubuntu kernel: [ 1960.963680] ata3.00: error: { UNC }
Aug 7 09:46:57 ubuntu kernel: [ 1961.000139] ata3.00: configured for UDMA/100
Aug 7 09:46:57 ubuntu kernel: [ 1961.000149] ata3: EH complete
That means your hard drive is faulty (it has some bad sectors on it) and
the system is unable to write data due to that - do a backup
immediately, then perform a long test according to your drive
manufacturer's instructions (in your case, your hard drive is a Fujitsu
one, so the diagnostic utility is here:
http://storage.toshiba.com/techdocs/fjdtwin.exe - you must run it from
Windows - or http://storage.toshiba.com/techdocs/fjdt_700.zip - you must
run it from a DOS boot disk).
If the utility reports the drive as faulty, replace the hard disk
immediately.
Please test the drive and tell me here how the test went.
** Changed in: ubiquity (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1033917
Title:
canNOT INSTALL 11.10
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1033917/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
