Public bug reported:
I have a Apple usb keyboard and a logitech usb mouse both plugged into my
laptop. When I resume after suspending the system the usb keyboard works but
the usb mouse does not. Unplugging the mouse and plugging it back in is
required after every system suspend/resume.
I have only noticed this problem since the upgrade to quantal beta.
I have included whatever I thought might be helpful (lsusb and demsg output),
but if more is needed please let me know and I will add it.
lsb_release -rd
Description: Ubuntu quantal (development branch)
Release: 12.10
Here is the output of lsusb:
Bus 001 Device 002: ID 05a9:2640 OmniVision Technologies, Inc. OV2640 Webcam
Bus 002 Device 003: ID 05ac:1006 Apple, Inc. Hub in Aluminum Keyboard
Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 005 Device 005: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 05ac:0220 Apple, Inc. Aluminum Keyboard (ANSI)
And this is the output of dmesg. At the end you can see several lines generated
from me unplugging/re-plugging the mouse to get it working again.
[20677.013684] sky2 0000:09:00.0: eth0: disabling interface
[20677.221566] wlan0: deauthenticating from 08:76:ff:4f:25:f8 by local choice
(reason=3)
[20677.256246] cfg80211: All devices are disconnected, going to restore
regulatory settings
[20677.256259] cfg80211: Restoring regulatory settings
[20677.256279] cfg80211: Calling CRDA to update world regulatory domain
[20677.270664] cfg80211: Ignoring regulatory request Set by core since the
driver uses its own custom regulatory domain
[20677.270668] cfg80211: World regulatory domain updated:
[20677.270670] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[20677.270672] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[20677.270675] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[20677.270677] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[20677.270679] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[20677.270681] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[20678.390876] init: anacron main process (11742) killed by TERM signal
[20679.739867] PM: Syncing filesystems ... done.
[20679.755635] PM: Preparing system for mem sleep
[20679.755652] Freezing user space processes ... (elapsed 0.01 seconds) done.
[20679.772135] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[20679.788182] PM: Entering mem sleep
[20679.788195] Suspending console(s) (use no_console_suspend to debug)
[20679.789092] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[20679.790093] sd 0:0:0:0: [sda] Stopping disk
[20680.004035] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after
183.745 msecs
[20680.004050] PM: suspend of drv: dev:pci0000:00 complete after 183.587 msecs
[20680.004065] PM: suspend of devices complete after 215.528 msecs
[20680.004067] PM: suspend devices took 0.216 seconds
[20680.004350] PM: late suspend of devices complete after 0.280 msecs
[20680.211776] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[20680.226852] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[20680.229891] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[20680.232625] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[20680.235624] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
[20680.251078] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
[20680.253723] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[20680.254219] PM: noirq suspend of devices complete after 249.868 msecs
[20680.254611] ACPI: Preparing to enter system sleep state S3
[20680.261870] PM: Saving platform NVS memory
[20680.261872] Disabling non-boot CPUs ...
[20680.364022] CPU 1 is now offline
[20680.364547] Extended CMOS year: 2000
[20680.364547] ACPI: Low-level resume complete
[20680.364547] PM: Restoring platform NVS memory
[20680.364547] Extended CMOS year: 2000
[20680.364547] Enabling non-boot CPUs ...
[20680.364547] Booting Node 0 Processor 1 APIC 0x1
[20680.380078] CPU1 is up
[20680.381982] ACPI: Waking up from system sleep state S3
[20680.391627] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[20680.394164] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
[20680.396066] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
[20680.398742] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[20680.400561] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[20680.402646] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[20680.404811] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[20680.406226] firewire_ohci 0000:03:09.0: proprietary Ricoh MMC controller
disabled (via firewire function)
[20680.406228] firewire_ohci 0000:03:09.0: MMC cards are now supported by
standard SDHCI controller
[20680.407576] PM: noirq resume of devices complete after 18.878 msecs
[20680.408628] PM: early resume of devices complete after 1.002 msecs
[20680.410176] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[20680.410205] usb usb3: root hub lost power or was reset
[20680.410375] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[20680.410407] usb usb4: root hub lost power or was reset
[20680.410538] iwl4965 0000:0b:00.0: RF_KILL bit toggled to enable radio.
[20680.410540] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[20680.410585] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[20680.410615] usb usb5: root hub lost power or was reset
[20680.410644] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[20680.410679] usb usb6: root hub lost power or was reset
[20680.410709] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[20680.410755] usb usb7: root hub lost power or was reset
[20680.410801] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[20680.410832] pci 0000:00:1e.0: setting latency timer to 64
[20680.410959] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[20680.411058] ata_piix 0000:00:1f.1: setting latency timer to 64
[20680.411073] ahci 0000:00:1f.2: setting latency timer to 64
[20680.411369] ata4.00: _GTF evaluation failed (AE 0x1001)
[20680.411531] ata5: port disabled--ignoring
[20680.648278] PM: resume of drv:hub dev:4-0:1.0 complete after 236.497 msecs
[20680.648286] PM: resume of drv: dev:ep_00 complete after 236.469 msecs
[20680.648291] PM: resume of drv:hub dev:6-0:1.0 complete after 236.326 msecs
[20680.648297] PM: resume of drv: dev:ep_00 complete after 236.179 msecs
[20680.648302] PM: resume of drv:hub dev:7-0:1.0 complete after 236.132 msecs
[20680.648308] PM: resume of drv: dev:ep_00 complete after 236.095 msecs
[20680.648313] PM: resume of drv: dev:ep_81 complete after 236.515 msecs
[20680.648318] PM: resume of drv: dev:ep_81 complete after 236.336 msecs
[20680.648323] PM: resume of drv: dev:ep_81 complete after 236.132 msecs
[20680.661224] PM: resume of drv: dev:ep_00 complete after 248.703 msecs
[20680.661260] PM: resume of drv:usb dev:2-3.2 complete after 248.596 msecs
[20680.661275] PM: resume of drv:hub dev:2-3:1.0 complete after 248.801 msecs
[20680.661286] PM: resume of drv: dev:ep_81 complete after 248.791 msecs
[20680.709065] PM: resume of drv:usbhid dev:2-3.2:1.1 complete after 296.337
msecs
[20680.709072] PM: resume of drv: dev:ep_82 complete after 296.323 msecs
[20680.709082] PM: resume of drv: dev:ep_00 complete after 296.315 msecs
[20680.709090] PM: resume of drv:usbhid dev:2-3.2:1.0 complete after 296.405
msecs
[20680.709100] PM: resume of drv: dev:ep_81 complete after 296.394 msecs
[20680.749329] PM: resume of drv: dev:ep_00 complete after 337.602 msecs
[20680.749371] PM: resume of drv:usb dev:3-2 complete after 336.832 msecs
[20680.749377] PM: resume of drv:hub dev:3-0:1.0 complete after 337.694 msecs
[20680.749387] PM: resume of drv: dev:ep_81 complete after 337.682 msecs
[20680.749423] PM: resume of drv: dev:ep_00 complete after 337.511 msecs
[20680.749436] PM: resume of drv:usb dev:5-2 complete after 336.648 msecs
[20680.749492] PM: resume of drv:hub dev:5-0:1.0 complete after 337.623 msecs
[20680.749505] PM: resume of drv: dev:ep_81 complete after 337.614 msecs
[20680.756159] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[20680.756263] ata3: SATA link down (SStatus 0 SControl 300)
[20680.768079] PM: resume of drv: dev:ep_00 complete after 356.481 msecs
[20680.768126] PM: resume of drv:usb dev:1-1 complete after 355.775 msecs
[20680.768143] PM: resume of drv:hub dev:1-0:1.0 complete after 356.558 msecs
[20680.768156] PM: resume of drv: dev:ep_81 complete after 356.565 msecs
[20680.772522] PM: resume of drv:scsi dev:host2 complete after 361.214 msecs
[20680.772554] PM: resume of drv:scsi_host dev:host2 complete after 361.206
msecs
[20680.825019] ata4.00: configured for UDMA/33
[20680.827972] PM: resume of drv:scsi dev:host3 complete after 416.428 msecs
[20680.827983] PM: resume of drv:scsi dev:target3:0:0 complete after 415.691
msecs
[20680.827993] PM: resume of drv:sr dev:3:0:0:0 complete after 415.682 msecs
[20680.828028] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 415.696
msecs
[20680.828046] PM: resume of drv:scsi_host dev:host3 complete after 416.493
msecs
[20681.008052] usb 5-2: reset low-speed USB device number 4 using uhci_hcd
[20681.125199] ata1.00: configured for UDMA/133
[20681.128099] firewire_core 0000:03:09.0: rediscovered device fw0
[20681.140231] PM: resume of drv:ata_port dev:ata1 complete after 484.857 msecs
[20681.147816] PM: resume of drv:scsi dev:host0 complete after 736.751 msecs
[20681.147827] PM: resume of drv:scsi dev:target0:0:0 complete after 735.599
msecs
[20681.147835] PM: resume of drv:sd dev:0:0:0:0 complete after 735.586 msecs
[20681.147838] sd 0:0:0:0: [sda] Starting disk
[20681.147851] PM: resume of drv:scsi_host dev:host0 complete after 736.719
msecs
[20681.148062] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 735.791
msecs
[20681.355475] usbhid 5-2:1.1: reset_resume error 1
[20681.355490] PM: resume of drv:usbhid dev:5-2:1.1 complete after 942.640 msecs
[20681.355498] PM: resume of drv: dev:ep_82 complete after 942.630 msecs
[20681.355509] PM: resume of drv: dev:ep_00 complete after 942.620 msecs
[20681.355521] PM: resume of drv:usbhid dev:5-2:1.0 complete after 942.715 msecs
[20681.355534] PM: resume of drv: dev:ep_81 complete after 942.703 msecs
[20681.408077] usb 3-2: reset full-speed USB device number 2 using uhci_hcd
[20681.613109] PM: resume of drv: dev:ep_00 complete after 1200.465 msecs
[20681.613116] PM: resume of drv:usb dev:3-2:1.0 complete after 1200.553 msecs
[20681.613132] PM: resume of drv: dev:ep_02 complete after 1200.529 msecs
[20681.613135] PM: resume of drv: dev:ep_81 complete after 1200.551 msecs
[20681.613140] PM: resume of drv: dev:ep_83 complete after 1200.515 msecs
[20681.712091] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[20681.879932] PM: resume of drv: dev:ep_00 complete after 1467.495 msecs
[20681.879949] PM: resume of drv:uvcvideo dev:1-1:1.1 complete after 1467.534
msecs
[20681.879953] PM: resume of drv:uvcvideo dev:1-1:1.0 complete after 1467.577
msecs
[20681.879983] PM: resume of drv: dev:ep_83 complete after 1467.589 msecs
[20681.879986] PM: resume of drv:video4linux dev:video0 complete after 333.435
msecs
[20681.880237] PM: resume of devices complete after 1471.606 msecs
[20681.880468] PM: resume devices took 1.472 seconds
[20681.880541] PM: Finishing wakeup.
[20681.880542] Restarting tasks ... done.
[20681.917522] video LNXVIDEO:00: Restoring backlight state
[20682.252540] sky2 0000:09:00.0: eth0: enabling interface
[20682.253483] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[20682.512685] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[20686.121616] wlan0: authenticate with 08:76:ff:4f:25:f8
[20686.133054] wlan0: send auth to 08:76:ff:4f:25:f8 (try 1/3)
[20686.135144] wlan0: authenticated
[20686.139976] wlan0: associating with AP with corrupt beacon
[20686.140060] wlan0: associate with 08:76:ff:4f:25:f8 (try 1/3)
[20686.148779] wlan0: RX AssocResp from 08:76:ff:4f:25:f8 (capab=0x411 status=0
aid=1)
[20686.181711] wlan0: associated
[20686.182373] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[20728.736260] usb 5-2: USB disconnect, device number 4
[20731.584196] usb 5-2: new low-speed USB device number 5 using uhci_hcd
[20731.761349] usb 5-2: New USB device found, idVendor=046d, idProduct=c517
[20731.761361] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20731.761368] usb 5-2: Product: USB Receiver
[20731.761374] usb 5-2: Manufacturer: Logitech
[20731.779134] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input17
[20731.779441] logitech 0003:046D:C517.0009: input,hidraw0: USB HID v1.10
Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[20731.810509] logitech 0003:046D:C517.000A: fixing up Logitech keyboard report
descriptor
[20731.812782] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input18
[20731.813184] logitech 0003:046D:C517.000A: input,hiddev0,hidraw1: USB HID
v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
** Affects: ubuntu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1049623
Title:
Usb mouse not working after resume
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1049623/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
