Hi guys,

I have just tested with the daily release of upstream kernel: 
$ uname -a
Linux david-M720R 3.6.0-999-generic #201210050420 SMP Fri Oct 5 08:29:10 UTC 
2012 i686 i686 i386 GNU/Linux

The problem is still there:
$ dmesg
[ 3428.421909] iwl4965 0000:02:00.0: Microcode SW error detected.  Restarting 
0x82000000.
[ 3428.421922] iwl4965 0000:02:00.0: Loaded firmware version: 228.61.2.24
[ 3428.421944] iwl4965 0000:02:00.0: Start IWL Error Log Dump:
[ 3428.421951] iwl4965 0000:02:00.0: Status: 0x000213E4, count: 5
[ 3428.422183] iwl4965 0000:02:00.0: Desc                                  Time 
      data1      data2      line
[ 3428.422194] iwl4965 0000:02:00.0: NMI_INTERRUPT_WDG            (0x0004) 
2236129641 0x00000002 0x03630000 208
[ 3428.422200] iwl4965 0000:02:00.0: pc      blink1  blink2  ilink1  ilink2  
hcmd
[ 3428.422208] iwl4965 0000:02:00.0: 0x0046C 0x02F3E 0x004C2 0x006DE 0x02FCE 
0x4BA00A8
[ 3428.422215] iwl4965 0000:02:00.0: FH register values:
[ 3428.422236] iwl4965 0000:02:00.0:       FH49_RSCSR_CHNL0_STTS_WPTR_REG: 
0X026c7d00
[ 3428.422255] iwl4965 0000:02:00.0:      FH49_RSCSR_CHNL0_RBDCB_BASE_REG: 
0X000fa6d0
[ 3428.422275] iwl4965 0000:02:00.0:                FH49_RSCSR_CHNL0_WPTR: 
0X000000b8
[ 3428.422295] iwl4965 0000:02:00.0:       FH49_MEM_RCSR_CHNL0_CONFIG_REG: 
0X80819000
[ 3428.422315] iwl4965 0000:02:00.0:        FH49_MEM_RSSR_SHARED_CTRL_REG: 
0X0000003c
[ 3428.422334] iwl4965 0000:02:00.0:          FH49_MEM_RSSR_RX_STATUS_REG: 
0X03630000
[ 3428.422354] iwl4965 0000:02:00.0:   FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 
0X00000000
[ 3428.422374] iwl4965 0000:02:00.0:              FH49_TSSR_TX_STATUS_REG: 
0X07ff0003
[ 3428.422393] iwl4965 0000:02:00.0:               FH49_TSSR_TX_ERROR_REG: 
0X00000000
[ 3428.423576] iwl4965 0000:02:00.0: Queue 4 stuck for 13112 ms.
[ 3428.423583] iwl4965 0000:02:00.0: On demand firmware reload
[ 3428.427573] ieee80211 phy0: Hardware restart was requested

I have just updated the tags accordingly:
- removed 'needs-upstream-testing'
- added 'kernel-bug-exists-upstream'

BR,
David


** Tags removed: needs-upstream-testing
** Tags added: kernel-bug-exists-upstream

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/779159

Title:
  [regression] after update to 11.04 wireless lan interruptions and
  Microcode SW error detected.  Restarting 0x82000000

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/779159/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to