Public bug reported:
My laptop, an Asus N43JF, features a USB 3.0 port powered by the Fresco
Logic 1400.
However, plugging in USB devices doesn't do anything. I also don't see anything
happening in syslog or kern.log when connecting devices.
It was working a few Ubuntu versions back (10.04 I believe), even if at the
time it was not fully operational because of other bugs.
There is the relevant part of lspci :
04:00.0 USB controller: Fresco Logic Device 1400 (rev 01) (prog-if 30 [XHCI])
Subsystem: Fantasia Trading LLC Device 1000
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4191
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <2us, L1
<32us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: xhci_hcd
ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: linux-image-generic 3.5.0.17.19
ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5
Uname: Linux 3.5.0-17-generic x86_64
ApportVersion: 2.6.1-0ubuntu3
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: adrien 2056 F.... pulseaudio
/dev/snd/pcmC0D0p: adrien 2056 F...m pulseaudio
Date: Sun Oct 21 21:04:41 2012
HibernationDevice: RESUME=UUID=e95661c4-29e1-4ad5-9560-bfd84861786f
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
MachineType: ASUSTeK Computer Inc. N43JF
ProcFB:
0 inteldrmfb
1 nouveaufb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-17-generic
root=UUID=91053bf3-cf50-4af4-bf9f-ada799c23971 ro quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.5.0-17-generic N/A
linux-backports-modules-3.5.0-17-generic N/A
linux-firmware 1.95
SourcePackage: linux
StagingDrivers: rts_pstor
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 01/26/2011
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: N43JF.210
dmi.board.asset.tag: ATN12345678901234567
dmi.board.name: N43JF
dmi.board.vendor: ASUSTeK Computer Inc.
dmi.board.version: 1.0
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK Computer Inc.
dmi.chassis.version: 1.0
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrN43JF.210:bd01/26/2011:svnASUSTeKComputerInc.:pnN43JF:pvr1.0:rvnASUSTeKComputerInc.:rnN43JF:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0:
dmi.product.name: N43JF
dmi.product.version: 1.0
dmi.sys.vendor: ASUSTeK Computer Inc.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug quantal running-unity staging
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1069502
Title:
Fresco Logic 1400 USB 3.0 controller not working
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1069502/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
