That was the one with report. I can test again but then to test correctly i need to remove ndiswrapper. So ill do sudo apt-get purge ndiswrapper how to revert sudo ndiswrapper -m ? ill put this to that wiki. in gksudo gedit /etc/modules remove line ndiswrapper and in sudo gedit /etc/modprobe.d/blacklist.conf remove lines
blacklist ath_pci blacklist ath_hal blacklist ath9k Thats all i think yes? Then kernel will work again after reboot ** Description changed: I have TL-WR340G router my repeater TL-WA500G set up to work BUT works with Windows, and Android, but not in Ubuntu. For 1/2 year I've tried different settings and setups using not bridge not repeater but universal repeater setting. So now i have HEX 128bit open WEP key (of course my repeater has only wep repeating or no key repeating function) and repeater has same HEX 128bit open WEP. Android was always even with non-compatible options able to connect. Like Hex key shared repeated open but on Android i put ASCII. Now i just tried on Windows and its working. So theres big problem in Ubuntu- cant connect no way to repeater. From Wifi )) 25m )) Repeater )) 5m )) Laptop I don't use MAC filtering QoS/WMM And all is default ====================ROUTER: TL-WR340G Latest firmware Status Firmware Version: 4.7.8 Build 100920 Rel.50756n Hardware Version: WR340G v5 0815311C LAN MAC Address: 74-EA-3A-C0-2E-94 IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Wireless Wireless Radio: Enable SSID: Gints26 Channel: 13 Mode: 54Mbps (802.11g) MAC Address: 74-EA-3A-C0-2E-94 IP Address: 192.168.1.1 WEP OPEN HEX 128-bit 3164726F7361327061726F6C65 Even when change to ASCII doesn't matter. MTU Size (in bytes): The default is 1500. Address Lease Time: 120 Default Firewall is not on Cant find Beacon Interval ====================REPEATER: Status Firmware Version: 4.3.3 Build 120727 Rel.56693n Hardware Version: WA500G v1 0815311C LAN MAC Address: 74-EA-3A-B7-B9-D9 IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 Wireless Operating Mode: Universal Repeater Signal: 25 dB SSID: Gints26 Channel: 13 Mode: 54Mbps (802.11g) Sometimes jumps to 11Mbps(802.11b) MAC Address: 74-EA-3A-B7-B9-D9 IP Address: 192.168.1.254 WEP OPEN HEX 128-bit 3164726F7361327061726F6C65 Even when change to ASCII doesn't matter. Address Lease Time: 120 Default RTS Threshold: 2346 Fragmentation Threshold: 2346 Beacon Interval: 100 Power: MAX These are off: Enable WMM Enable AP Isolation Disable short preamble WIFI Bug_Report_Minimum_Requirement_Information https://wiki.ubuntu.com/Kernel/LinuxWireless#Bug_Report_Minimum_Requirement_Information 1. eMachines e525 2. No 3. Thats in top of this bug already 4. Yes- any Ubuntu version 5. 3-4 meters 6. Theres nothing in the way. WIfi is on a wardrobe. A. no 7. No 8. No regression- it happens in 10.04 and 12.04 9. Yes - 10. + 10. Yes using http://support.gateway.com/us/en/emac/product/default.aspx?tab=1&modelId=1257 Wireless LAN Driver Atheros 7.7.0.348 5.7 MB 08/10/2010 from there in Ndiswrapper netathw.inf + 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 + link/ether 0c:ee:e6:c5:3b:43 brd ff:ff:ff:ff:ff:ff + inet 192.168.1.102/24 brd 192.168.1.255 scope global wlan0 + inet6 fe80::eee:e6ff:fec5:3b43/64 scope link + valid_lft forever preferred_lft forever + wlan0 IEEE 802.11g ESSID:"Kangarooo" + Mode:Managed Frequency:2.472 GHz Access Point: 2C:B0:5D:49:0E:7A + Bit Rate=54 Mb/s + Power Management:off + Link Quality:90/100 Signal level:-38 dBm Noise level:-96 dBm + Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 + Tx excessive retries:0 Invalid misc:0 Missed beacon:0 + 11. Not + 12. Not ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-43-generic 2.6.32-43.97 Regression: No Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-43.97-generic 2.6.32.59+drm33.24 Uname: Linux 2.6.32-43-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. AplayDevices: **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: i386 ArecordDevices: **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: kangarooo 1287 F.... pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0x96700000 irq 22' Mixer name : 'Realtek ALC272' Components : 'HDA:10ec0272,10250212,00100001' Controls : 16 Simple ctrls : 9 Date: Wed Oct 10 22:57:45 2012 HibernationDevice: RESUME=UUID=1d85bad1-8614-4df4-85f7-36f5c250068e InstallationMedia: Ubuntu-Netbook 10.04 "Lucid Lynx" - Release i386 (20100429.4) MachineType: eMachines eMachines E525 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-43-generic root=UUID=830d5829-198b-4ac4-9a58-18383e36bace ro quiet splash ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34.14 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux dmi.bios.date: 11/04/2010 dmi.bios.vendor: eMachines dmi.bios.version: V3.10 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: eMachines E525 dmi.board.vendor: eMachines dmi.board.version: V3.10 dmi.chassis.type: 10 dmi.chassis.vendor: eMachines dmi.chassis.version: V3.10 dmi.modalias: dmi:bvneMachines:bvrV3.10:bd11/04/2010:svneMachines:pneMachinesE525:pvrV3.10:rvneMachines:rneMachinesE525:rvrV3.10:cvneMachines:ct10:cvrV3.10: dmi.product.name: eMachines E525 dmi.product.version: V3.10 dmi.sys.vendor: eMachines ** Description changed: I have TL-WR340G router my repeater TL-WA500G set up to work BUT works with Windows, and Android, but not in Ubuntu. For 1/2 year I've tried different settings and setups using not bridge not repeater but universal repeater setting. So now i have HEX 128bit open WEP key (of course my repeater has only wep repeating or no key repeating function) and repeater has same HEX 128bit open WEP. Android was always even with non-compatible options able to connect. Like Hex key shared repeated open but on Android i put ASCII. Now i just tried on Windows and its working. So theres big problem in Ubuntu- cant connect no way to repeater. From Wifi )) 25m )) Repeater )) 5m )) Laptop I don't use MAC filtering QoS/WMM And all is default ====================ROUTER: TL-WR340G Latest firmware Status Firmware Version: 4.7.8 Build 100920 Rel.50756n Hardware Version: WR340G v5 0815311C LAN MAC Address: 74-EA-3A-C0-2E-94 IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Wireless Wireless Radio: Enable SSID: Gints26 Channel: 13 Mode: 54Mbps (802.11g) MAC Address: 74-EA-3A-C0-2E-94 IP Address: 192.168.1.1 WEP OPEN HEX 128-bit 3164726F7361327061726F6C65 Even when change to ASCII doesn't matter. MTU Size (in bytes): The default is 1500. Address Lease Time: 120 Default Firewall is not on Cant find Beacon Interval ====================REPEATER: Status Firmware Version: 4.3.3 Build 120727 Rel.56693n Hardware Version: WA500G v1 0815311C LAN MAC Address: 74-EA-3A-B7-B9-D9 IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 Wireless Operating Mode: Universal Repeater Signal: 25 dB SSID: Gints26 Channel: 13 Mode: 54Mbps (802.11g) Sometimes jumps to 11Mbps(802.11b) MAC Address: 74-EA-3A-B7-B9-D9 IP Address: 192.168.1.254 WEP OPEN HEX 128-bit 3164726F7361327061726F6C65 Even when change to ASCII doesn't matter. Address Lease Time: 120 Default RTS Threshold: 2346 Fragmentation Threshold: 2346 Beacon Interval: 100 Power: MAX These are off: Enable WMM Enable AP Isolation Disable short preamble WIFI Bug_Report_Minimum_Requirement_Information https://wiki.ubuntu.com/Kernel/LinuxWireless#Bug_Report_Minimum_Requirement_Information 1. eMachines e525 2. No 3. Thats in top of this bug already 4. Yes- any Ubuntu version 5. 3-4 meters 6. Theres nothing in the way. WIfi is on a wardrobe. A. no 7. No 8. No regression- it happens in 10.04 and 12.04 9. Yes 10. Yes using http://support.gateway.com/us/en/emac/product/default.aspx?tab=1&modelId=1257 Wireless LAN Driver Atheros 7.7.0.348 5.7 MB 08/10/2010 from there in Ndiswrapper netathw.inf 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 - link/ether 0c:ee:e6:c5:3b:43 brd ff:ff:ff:ff:ff:ff - inet 192.168.1.102/24 brd 192.168.1.255 scope global wlan0 - inet6 fe80::eee:e6ff:fec5:3b43/64 scope link - valid_lft forever preferred_lft forever - wlan0 IEEE 802.11g ESSID:"Kangarooo" - Mode:Managed Frequency:2.472 GHz Access Point: 2C:B0:5D:49:0E:7A - Bit Rate=54 Mb/s - Power Management:off - Link Quality:90/100 Signal level:-38 dBm Noise level:-96 dBm - Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 - Tx excessive retries:0 Invalid misc:0 Missed beacon:0 + link/ether 0c:ee:e6:c5:3b:43 brd ff:ff:ff:ff:ff:ff + inet 192.168.1.102/24 brd 192.168.1.255 scope global wlan0 + inet6 fe80::eee:e6ff:fec5:3b43/64 scope link + valid_lft forever preferred_lft forever + wlan0 IEEE 802.11g ESSID:"Kangarooo" + Mode:Managed Frequency:2.472 GHz Access Point: 2C:B0:5D:49:0E:7A + Bit Rate=54 Mb/s + Power Management:off + Link Quality:90/100 Signal level:-38 dBm Noise level:-96 dBm + Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 + Tx excessive retries:0 Invalid misc:0 Missed beacon:0 + tail /etc/network/interfaces + auto lo + iface lo inet loopback + + 11. Not 12. Not ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-43-generic 2.6.32-43.97 Regression: No Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.32-43.97-generic 2.6.32.59+drm33.24 Uname: Linux 2.6.32-43-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. AplayDevices: **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: i386 ArecordDevices: **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: kangarooo 1287 F.... pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0x96700000 irq 22' Mixer name : 'Realtek ALC272' Components : 'HDA:10ec0272,10250212,00100001' Controls : 16 Simple ctrls : 9 Date: Wed Oct 10 22:57:45 2012 HibernationDevice: RESUME=UUID=1d85bad1-8614-4df4-85f7-36f5c250068e InstallationMedia: Ubuntu-Netbook 10.04 "Lucid Lynx" - Release i386 (20100429.4) MachineType: eMachines eMachines E525 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-43-generic root=UUID=830d5829-198b-4ac4-9a58-18383e36bace ro quiet splash ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash RelatedPackageVersions: linux-firmware 1.34.14 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux dmi.bios.date: 11/04/2010 dmi.bios.vendor: eMachines dmi.bios.version: V3.10 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: eMachines E525 dmi.board.vendor: eMachines dmi.board.version: V3.10 dmi.chassis.type: 10 dmi.chassis.vendor: eMachines dmi.chassis.version: V3.10 dmi.modalias: dmi:bvneMachines:bvrV3.10:bd11/04/2010:svneMachines:pneMachinesE525:pvrV3.10:rvneMachines:rneMachinesE525:rvrV3.10:cvneMachines:ct10:cvrV3.10: dmi.product.name: eMachines E525 dmi.product.version: V3.10 dmi.sys.vendor: eMachines -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1065222 Title: 168c:002b eMachines e525 Ubuntu cant connect to wifi repeater To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1065222/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
