demsg log seems to by the same:
[ 40.556993] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
(null)
[ 54.742955] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe
frozen
[ 54.742968] ata6: irq_stat 0x00400040, connection status changed
[ 54.742970] ata6: SError: { PHYRdyChg 10B8B DevExch }
[ 54.742973] ata6: hard resetting link
[ 55.464133] ata6: SATA link down (SStatus 0 SControl 300)
[ 60.459325] ata6: hard resetting link
[ 60.778977] ata6: SATA link down (SStatus 0 SControl 300)
[ 60.778994] ata6: limiting SATA link speed to 1.5 Gbps
[ 65.774178] ata6: hard resetting link
[ 66.093819] ata6: SATA link down (SStatus 0 SControl 310)
[ 66.093836] ata6.00: disabled
[ 66.093846] ata6: EH complete
[ 66.093908] ata6.00: detaching (SCSI 5:0:0:0)
[ 66.095212] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[ 66.095244] sd 5:0:0:0: [sdb]
[ 66.095247] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 66.095249] sd 5:0:0:0: [sdb] Stopping disk
[ 66.095256] sd 5:0:0:0: [sdb] START_STOP FAILED
[ 66.095258] sd 5:0:0:0: [sdb]
[ 66.095259] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 77.891415] ata6: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe
frozen
[ 77.891421] ata6: irq_stat 0x00000040, connection status changed
[ 77.891424] ata6: SError: { CommWake DevExch }
[ 77.891432] ata6: hard resetting link
[ 78.949371] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 78.950315] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 78.950321] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 78.950324] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 78.950880] ata6.00: HPA detected: current 5860531055, native 5860533168
[ 78.951058] ata6.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[ 78.951063] ata6.00: 5860531055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 78.951238] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 78.952257] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 78.952263] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 78.952266] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 78.953129] ata6.00: failed to get Identify Device Data, Emask 0x1
[ 78.953136] ata6.00: configured for UDMA/133
[ 78.953291] ata6: EH complete
[ 78.953454] scsi 5:0:0:0: Direct-Access ATA ST3000DM001-1CH1 CC24
PQ: 0 ANSI: 5
[ 78.953669] sd 5:0:0:0: [sdb] 5860531055 512-byte logical blocks: (3.00
TB/2.72 TiB)
[ 78.953673] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 78.953708] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 78.953754] sd 5:0:0:0: [sdb] Write Protect is off
[ 78.953760] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 78.953796] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 78.971263] sdb: unknown partition table
[ 78.971553] sd 5:0:0:0: [sdb] Attached SCSI disk
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1099203
Title:
hot swap gpt hdd destroys partion table during swaping
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1099203/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
