forget to attach report. please see previous mail
On Fri, Feb 8, 2013 at 1:10 PM, Aravind Gopal <myaravi...@gmail.com> wrote: > Sir, > sorry for the delay. I got stuck with Kubuntu 12.10 installation. > Use rear stereo analog out only. Do not have ear phone. > According to the manual rear green is for stereo out . > The problem arose after update. After update a restart was required, but > after restart there was no sound. I have restarted many times. but no use. > but in the evening it was ok()"automatically". This type of incidence > occurred previously also. But no problem with windows 7. > Some thing may gone wrong with OS hardware detection. > > Another heartbreaking incidence occurred. I don't know where to complain. > when I cannot hear sound in kubundu 12.04 LTS. I tried to install Kubundu > 12.10 as an alternative when the LTS goes wrong. > Live booting of Kubundu 12.10 was impressive and installation was also > brisk. > But after installation the reboot was extremely slow it takes minutes and > minutes. > When it was very very slow to boot and work I tried recovery mode. Some > thing called inodes are fixed, some directory structures problems are > cleared, I/O error in buffer showed. and corrected. > But even after that system is slow to get even recovery options. > could not repair broken packages. through mode. it says some files are > read only, could not resolve and download extras/ubundu/... etc. I checked > the partition with KDE partition manager and the report attached. > No use even cannot change the default grub boot option to old os using > grub config of KDE. In real real trouble. please help. > > Thank You > > > > On Fri, Feb 8, 2013 at 7:24 AM, Raymond <1118...@bugs.launchpad.net>wrote: > >> refer to the manual of biostar TA890GXE >> >> >> F_AUDIO1: Front Panel Audio Header This header allows user to connect the >> front audio output cable with the PC front panel. This header allows only >> HD audio front panel connector; AC’97 connector is not acceptable. >> >> -- >> You received this bug notification because you are subscribed to the bug >> report. >> https://bugs.launchpad.net/bugs/1118041 >> >> Title: >> [TA890GXE, ATI RS690/780 HDMI, Digital Out, HDMI] Playback problem >> >> Status in “alsa-driver” package in Ubuntu: >> New >> >> Bug description: >> After the regular update by update manager the syatem doesnot have any >> sound, only a few crack sounds. >> During update I was hearing music. But after the restart(after update) >> no sound at all, >> use of "ubuntu-bug -s audio" command and the following trouble shooting >> process showed the messge " You Don't seem to have configured "PULSE Audio" >> to use the card you want to output from....... ". >> When I inspected the 'sound setting' the device automatically changed >> to 'hdmi', I changed it back to 'analog sterio output' but the sound is not >> restored to normal after many restarts. This problem happened earlier also >> while certain previous updates. >> >> ProblemType: Bug >> DistroRelease: Ubuntu 12.04 >> Package: alsa-base 1.0.25+dfsg-0ubuntu1 >> ProcVersionSignature: Ubuntu 3.2.0-37.58-generic 3.2.35 >> Uname: Linux 3.2.0-37-generic x86_64 >> NonfreeKernelModules: fglrx >> AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. >> ApportVersion: 2.0.1-0ubuntu17.1 >> Architecture: amd64 >> AudioDevicesInUse: >> USER PID ACCESS COMMAND >> /dev/snd/controlC2: gkn 2039 F.... pulseaudio >> /dev/snd/controlC1: gkn 2039 F.... pulseaudio >> /dev/snd/controlC0: gkn 2039 F.... pulseaudio >> Card0.Amixer.info: >> Card hw:0 'SB'/'HDA ATI SB at 0xfe4f8000 irq 16' >> Mixer name : 'Realtek ALC892' >> Components : 'HDA:10ec0892,15658224,00100302' >> Controls : 40 >> Simple ctrls : 19 >> Card1.Amixer.info: >> Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfe6e8000 irq 19' >> Mixer name : 'ATI RS690/780 HDMI' >> Components : 'HDA:1002791a,00791a00,00100000' >> Controls : 4 >> Simple ctrls : 1 >> Card1.Amixer.values: >> Simple mixer control 'IEC958',0 >> Capabilities: pswitch pswitch-joined penum >> Playback channels: Mono >> Mono: Playback [on] >> Card2.Amixer.info: >> Card hw:2 'SAA7134'/'saa7133[0] at 0xfe9ff800 irq 20' >> Mixer name : 'SAA7134 Mixer' >> Components : '' >> Controls : 6 >> Simple ctrls : 3 >> Date: Thu Feb 7 11:12:27 2013 >> InstallationMedia: Kubuntu 12.04 LTS "Precise Pangolin" - Release amd64 >> (20120423) >> MarkForUpload: True >> PackageArchitecture: all >> ProcEnviron: >> LANGUAGE=en_US >> TERM=xterm >> PATH=(custom, no user) >> LANG=en_US.UTF-8 >> SHELL=/bin/bash >> SourcePackage: alsa-driver >> Symptom: audio >> Symptom_AlsaPlaybackTest: ALSA playback test through plughw:HDMI failed >> Symptom_Card: RS880 HDMI Audio [Radeon HD 4200 Series] - HDA ATI HDMI >> Symptom_Jack: Digital Out, HDMI >> Symptom_Type: None of the above >> Title: [TA890GXE, ATI RS690/780 HDMI, Digital Out, HDMI] Playback >> problem >> UpgradeStatus: No upgrade log present (probably fresh install) >> dmi.bios.date: 05/30/2011 >> dmi.bios.vendor: American Megatrends Inc. >> dmi.bios.version: 080015 >> dmi.board.asset.tag: To Be Filled By O.E.M. >> dmi.board.name: TA890GXE >> dmi.board.vendor: BIOSTAR Group >> dmi.chassis.asset.tag: None >> dmi.chassis.type: 3 >> dmi.chassis.vendor: BIOSTAR Group >> dmi.modalias: >> dmi:bvnAmericanMegatrendsInc.:bvr080015:bd05/30/2011:svnBIOSTARGroup:pnTA890GXE:pvr:rvnBIOSTARGroup:rnTA890GXE:rvr:cvnBIOSTARGroup:ct3:cvr: >> dmi.product.name: TA890GXE >> dmi.sys.vendor: BIOSTAR Group >> >> To manage notifications about this bug go to: >> >> https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1118041/+subscriptions >> > > > > -- > Aravind Gopal > -- Aravind Gopal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1118041 Title: [TA890GXE, ATI RS690/780 HDMI, Digital Out, HDMI] Playback problem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1118041/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
