Public bug reported:
This wireless device works well at Ubuntu 12.04 & 12.10 but it doesn't
work at Ubuntu 13.04.
04:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n
[14e4:4328]
(rev 05)
Subsystem: Apple Inc. Device [106b:008c]
Physical Slot: 4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SER
R- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort-
>SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+
)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 <4us, L
1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 08-29-5b-ff-ff-c8-00-1f
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: b43-pci-bridge
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu6
ProcVersionSignature: Ubuntu 3.8.0-16.26-generic 3.8.5
Uname: Linux 3.8.0-16-generic x86_64
NonfreeKernelModules: wl
ApportVersion: 2.9.2-0ubuntu5
Architecture: amd64
CasperVersion: 1.330
Date: Thu Apr 4 09:11:47 2013
LiveMediaBuild: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130402.1)
MarkForUpload: True
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
XDG_RUNTIME_DIR=<set>
LANG=en_US.UTF-8
SHELL=/bin/bash
SourcePackage: bcmwl
UpgradeStatus: No upgrade log present (probably fresh install)
** Affects: bcmwl (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug raring
** Description changed:
This wireless device works well at Ubuntu 12.04 & 12.10 but it doesn't
work at Ubuntu 13.04.
- 05:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8058
PCI-E Gigabit E
- thernet Controller [11ab:436a] (rev 13)
- Subsystem: Marvell Technology Group Ltd. Imac 8,1 Wired Ethernet
Adapter [11ab:00
- ba]
- Physical Slot: 5
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
+ 04:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n
[14e4:4328]
+ (rev 05)
+ Subsystem: Apple Inc. Device [106b:008c]
+ Physical Slot: 4
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SER
+ R- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort-
+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
- Interrupt: pin A routed to IRQ 45
- Region 0: Memory at d0100000 (64-bit, non-prefetchable) [size=16K]
- Region 2: I/O ports at 5000 [size=256]
- Expansion ROM at d0d00000 [disabled] [size=128K]
- Capabilities: [48] Power Management version 3
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
- Capabilities: [50] Vital Product Data
- Product Name: Marvell Yukon 88E8058 Gigabit Ethernet
Controller
- Read-only fields:
- [PN] Part number: Yukon 88E8058
- [EC] Engineering changes: Rev. 1.3
- [MN] Manufacture ID: 4d 61 72 76 65 6c 6c
- [SN] Serial number: AbCdEfG1FEF51
- [CP] Extended capability: 01 10 cc 03
- [RV] Reserved: checksum good, 9 byte(s) reserved
- Read/write fields:
- [RW] Read-write area: 121 byte(s) free
- End
- Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0300c Data: 4122
- Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
+ Interrupt: pin A routed to IRQ 16
+ Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=16K]
+ Capabilities: [40] Power Management version 3
+ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+
+ )
+ Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
+ Capabilities: [58] Vendor Specific Information: Len=78 <?>
+ Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
+ Address: 0000000000000000 Data: 0000
+ Capabilities: [d0] Express (v1) Endpoint, MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us,
L1 unlimited
+ ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 2048 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <256ns, L1 unlimited
+ MaxPayload 128 bytes, MaxReadReq 128 bytes
+ DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
+ LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <4us, L
+ 1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
- LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain-
CommClk+
+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt-
+ ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
+ UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP-
+ ECRC- UnsupReq- ACSViol-
+ UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP-
+ ECRC- UnsupReq- ACSViol-
+ UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+
+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
- AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap-
ChkEn-
- Kernel driver in use: sky2
+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+
ChkEn-
+ Capabilities: [13c v1] Virtual Channel
+ Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
+ Arb: Fixed- WRR32- WRR64- WRR128-
+ Ctrl: ArbSelect=Fixed
+ Status: InProgress-
+ VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
+ Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
+ Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
+ Status: NegoPending- InProgress-
+ Capabilities: [160 v1] Device Serial Number 08-29-5b-ff-ff-c8-00-1f
+ Capabilities: [16c v1] Power Budgeting <?>
+ Kernel driver in use: b43-pci-bridge
ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: bcmwl-kernel-source 6.20.155.1+bdcom-0ubuntu6
ProcVersionSignature: Ubuntu 3.8.0-16.26-generic 3.8.5
Uname: Linux 3.8.0-16-generic x86_64
NonfreeKernelModules: wl
ApportVersion: 2.9.2-0ubuntu5
Architecture: amd64
CasperVersion: 1.330
Date: Thu Apr 4 09:11:47 2013
LiveMediaBuild: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130402.1)
MarkForUpload: True
ProcEnviron:
- TERM=xterm
- PATH=(custom, no user)
- XDG_RUNTIME_DIR=<set>
- LANG=en_US.UTF-8
- SHELL=/bin/bash
+ TERM=xterm
+ PATH=(custom, no user)
+ XDG_RUNTIME_DIR=<set>
+ LANG=en_US.UTF-8
+ SHELL=/bin/bash
SourcePackage: bcmwl
UpgradeStatus: No upgrade log present (probably fresh install)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1164378
Title:
bcmwl-kernel-source can not enable Broadcom Corporation BCM4321
802.11a/b/g/n [14e4:4328]
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1164378/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
