the black screen happens after grub and before lightdm loads, for me it stays 
black due to needing a password for my encrypted boot drive, but i never see 
this prompt due to the black screen
i can type this password in even with the blank screen and X is then shown but 
the resolution is still 800x600 not 1024x600

dmesg
---------------

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.0-19-generic (buildd@panlong) (gcc version 
4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:19:42 UTC 
2013 (Ubuntu 3.8.0-19.29-generic 3.8.8)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f68ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f690000-0x000000007f69dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f69e000-0x000000007f6dffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6e0000-0x000000007f6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: ASUSTeK Computer INC. 1001P/1005P, BIOS 0901    03/04/2010
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f690 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[    0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[    0.000000] total RAM covered: 2039M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 16M         num_reg: 3      lose 
cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[    0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at 
[c00ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 
0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x3447e000-0x36236fff]
[    0.000000] ACPI: RSDP 000fbf40 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 7f690100 00064 (v01 A_M_I_ OEMXSDT  03001004 MSFT 
00000097)
[    0.000000] ACPI: FACP 7f690290 000F4 (v04 A_M_I_ OEMFACP  03001004 MSFT 
00000097)
[    0.000000] ACPI: DSDT 7f690490 08C4F (v02  A1414 A1414000 00000000 INTL 
20060113)
[    0.000000] ACPI: FACS 7f69e000 00040
[    0.000000] ACPI: APIC 7f690390 0005C (v02 A_M_I_ OEMAPIC  03001004 MSFT 
00000097)
[    0.000000] ACPI: MCFG 7f6903f0 0003C (v01 A_M_I_ OEMMCFG  03001004 MSFT 
00000097)
[    0.000000] ACPI: ECDT 7f690430 00055 (v01 A_M_I_ OEMECDT  03001004 MSFT 
00000097)
[    0.000000] ACPI: OEMB 7f69e040 00061 (v01 A_M_I_ AMI_OEM  03001004 MSFT 
00000097)
[    0.000000] ACPI: HPET 7f6990e0 00038 (v01 A_M_I_ OEMHPET  03001004 MSFT 
00000097)
[    0.000000] ACPI: GSCI 7f69e0b0 02024 (v01 A_M_I_ GMCHSCI  03001004 MSFT 
00000097)
[    0.000000] ACPI: SSDT 7f6a0c80 004F0 (v01  PmRef    CpuPm 00003000 INTL 
20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1146MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x7f68ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7f68ffff]
[    0.000000] On node 0 totalpages: 521759
[    0.000000] free_area_init_node: node 0, pgdat c18f6100, node_mem_map 
f6c0d200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2294 pages used for memmap
[    0.000000]   HighMem zone: 291228 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[    0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[    0.000000] e820: [mem 0x7f700000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 
nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f6be5000 s35008 r0 d22336 u57344
[    0.000000] pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 517681
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.0-19-generic 
root=/dev/mapper/kubuntu--vg-root ro video=LVDS-1:d nomodeset drm.debug=6 
splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4174848 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want 
memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007f690)
[    0.000000] Memory: 2024252k/2087488k available (6251k kernel code, 62784k 
reserved, 2973k data, 784k init, 1174088k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1903000 - 0xc19c7000   ( 784 kB)
[    0.000000]       .data : 0xc161ad30 - 0xc19023c0   (2973 kB)
[    0.000000]       .text : 0xc1000000 - 0xc161ad30   (6251 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor 
mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, 
Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f4008000 soft=f400a000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1666.558 MHz processor
[    0.004003] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 3333.11 BogoMIPS (lpj=6666232)
[    0.004027] pid_max: default: 32768 minimum: 301
[    0.004107] Security Framework initialized
[    0.004133] AppArmor: AppArmor initialized
[    0.004144] Yama: becoming mindful.
[    0.004261] Mount-cache hash table entries: 512
[    0.004665] Initializing cgroup subsys cpuacct
[    0.004680] Initializing cgroup subsys memory
[    0.004704] Initializing cgroup subsys devices
[    0.004716] Initializing cgroup subsys freezer
[    0.004728] Initializing cgroup subsys blkio
[    0.004740] Initializing cgroup subsys perf_event
[    0.004755] Initializing cgroup subsys hugetlb
[    0.004819] CPU: Physical Processor ID: 0
[    0.004831] CPU: Processor Core ID: 0
[    0.004843] mce: CPU supports 5 MCE banks
[    0.004864] CPU0: Thermal monitoring enabled (TM2)
[    0.004879] process: using mwait in idle threads
[    0.004904] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.004904] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[    0.004904] tlb_flushall_shift: 6
[    0.005300] Freeing SMP alternatives: 24k freed
[    0.011335] ACPI: Core revision 20121018
[    0.024024] ftrace: allocating 26115 entries in 52 pages
[    0.048167] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048602] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088456] smpboot: CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz (fam: 06, 
model: 1c, stepping: 0a)
[    0.092000] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel 
PMU driver.
[    0.092000] ... version:                3
[    0.092000] ... bit width:              40
[    0.092000] ... generic registers:      2
[    0.092000] ... value mask:             000000ffffffffff
[    0.092000] ... max period:             000000007fffffff
[    0.092000] ... fixed-purpose events:   3
[    0.092000] ... event mask:             0000000700000003
[    0.092000] CPU 1 irqstacks, hard=f40d8000 soft=f40da000
[    0.092000] smpboot: Booting Node   0, Processors  #1 OK
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.104054] Brought up 2 CPUs
[    0.104086] smpboot: Total of 2 processors activated (6666.23 BogoMIPS)
[    0.104243] NMI watchdog: enabled on all CPUs, permanently consumes one 
hw-PMU counter.
[    0.104816] devtmpfs: initialized
[    0.104816] EVM: security.selinux
[    0.104816] EVM: security.SMACK64
[    0.104816] EVM: security.capability
[    0.108164] PM: Registering ACPI NVS region [mem 0x7f69e000-0x7f6dffff] 
(270336 bytes)
[    0.108443] regulator-dummy: no parameters
[    0.108594] NET: Registered protocol family 16
[    0.108991] EISA bus registered
[    0.109216] ACPI: bus type pci registered
[    0.109358] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.109377] PCI: not using MMCONFIG
[    0.109576] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it 
NX.
[    0.109654] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.109665] PCI: Using configuration type 1 for base access
[    0.112735] bio: create slab <bio-0> at 0
[    0.112735] ACPI: Added _OSI(Module Device)
[    0.112735] ACPI: Added _OSI(Processor Device)
[    0.112735] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.112735] ACPI: Added _OSI(Processor Aggregator Device)
[    0.116739] ACPI: EC: EC description table is found, configuring boot EC
[    0.120440] ACPI: Executed 1 blocks of module-level executable AML code
[    0.132796] ACPI: SSDT 7f6a0190 00326 (v01  PmRef  Cpu0Ist 00003000 INTL 
20060113)
[    0.132796] ACPI: Dynamic OEM Table Load:
[    0.132796] ACPI: SSDT   (null) 00326 (v01  PmRef  Cpu0Ist 00003000 INTL 
20060113)
[    0.132885] ACPI: SSDT 7f6a0550 00724 (v01  PmRef  Cpu0Cst 00003001 INTL 
20060113)
[    0.133728] ACPI: Dynamic OEM Table Load:
[    0.133742] ACPI: SSDT   (null) 00724 (v01  PmRef  Cpu0Cst 00003001 INTL 
20060113)
[    0.134292] ACPI: SSDT 7f6a00e0 000AB (v01  PmRef  Cpu1Ist 00003000 INTL 
20060113)
[    0.135150] ACPI: Dynamic OEM Table Load:
[    0.135164] ACPI: SSDT   (null) 000AB (v01  PmRef  Cpu1Ist 00003000 INTL 
20060113)
[    0.135396] ACPI: SSDT 7f6a04c0 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 
20060113)
[    0.136247] ACPI: Dynamic OEM Table Load:
[    0.136261] ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 
20060113)
[    0.136703] ACPI: Interpreter enabled
[    0.136729] ACPI: (supports S0 S3 S4 S5)
[    0.136778] ACPI: Using IOAPIC for interrupt routing
[    0.136847] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.138002] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI 
motherboard resources
[    0.138019] PCI: Using MMCONFIG for extended config space
[    0.147542] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.150102] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.150430] ACPI: No dock devices found.
[    0.150450] PCI: Using host bridge windows from ACPI; if necessary, use 
"pci=nocrs" and report a bug
[    0.150635] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.150651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.151188] PCI host bridge to bus 0000:00
[    0.151204] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.151218] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.151230] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.151243] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.151256] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.151269] pci_bus 0000:00: root bus resource [mem 0x7f700000-0xfed8ffff]
[    0.151299] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[    0.151366] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[    0.151384] pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff]
[    0.151395] pci 0000:00:02.0: reg 14: [io  0xdc00-0xdc07]
[    0.151406] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.151416] pci 0000:00:02.0: reg 1c: [mem 0xf7d00000-0xf7dfffff]
[    0.151471] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[    0.151486] pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff]
[    0.151596] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.151622] pci 0000:00:1b.0: reg 10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
[    0.151722] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.151762] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.151865] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.151905] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.152026] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.152070] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.152173] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.152214] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.152272] pci 0000:00:1d.0: reg 20: [io  0xd400-0xd41f]
[    0.152323] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.152380] pci 0000:00:1d.1: reg 20: [io  0xd480-0xd49f]
[    0.152431] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.152488] pci 0000:00:1d.2: reg 20: [io  0xd800-0xd81f]
[    0.152540] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.152597] pci 0000:00:1d.3: reg 20: [io  0xd880-0xd89f]
[    0.152660] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.152689] pci 0000:00:1d.7: reg 10: [mem 0xf7cf7c00-0xf7cf7fff]
[    0.152802] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.152837] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.152934] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.153103] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.153131] pci 0000:00:1f.2: reg 10: [io  0xd080-0xd087]
[    0.153146] pci 0000:00:1f.2: reg 14: [io  0xd000-0xd003]
[    0.153161] pci 0000:00:1f.2: reg 18: [io  0xcc00-0xcc07]
[    0.153175] pci 0000:00:1f.2: reg 1c: [io  0xc880-0xc883]
[    0.153190] pci 0000:00:1f.2: reg 20: [io  0xc800-0xc81f]
[    0.153205] pci 0000:00:1f.2: reg 24: [mem 0xf7cf7800-0xf7cf7bff]
[    0.153268] pci 0000:00:1f.2: PME# supported from D3hot
[    0.153301] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.153368] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.153483] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.153642] pci 0000:02:00.0: [8086:4232] type 00 class 0x028000
[    0.153718] pci 0000:02:00.0: reg 10: [mem 0xfbffe000-0xfbffffff 64bit]
[    0.153959] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.154104] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.154123] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.154134] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf6ffffff 
64bit pref]
[    0.154227] pci 0000:01:00.0: [1969:1062] type 00 class 0x020000
[    0.154261] pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[    0.154281] pci 0000:01:00.0: reg 18: [io  0xec00-0xec7f]
[    0.154415] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.164034] pci 0000:00:1c.3: PCI bridge to [bus 01]
[    0.164052] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.164061] pci 0000:00:1c.3:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.164156] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.164180] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] 
(subtractive decode)
[    0.164186] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] 
(subtractive decode)
[    0.164193] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] 
(subtractive decode)
[    0.164199] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] 
(subtractive decode)
[    0.164205] pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xfed8ffff] 
(subtractive decode)
[    0.164234] pci_bus 0000:00: on NUMA node 0
[    0.164357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.164452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.164516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.164562]  pci0000:00: ACPI _OSC support notification failed, disabling 
PCIe ASPM
[    0.164579]  pci0000:00: Unable to request _OSC control (_OSC support mask: 
0x08)
[    0.166721] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.166866] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.167004] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.167142] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.167280] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) 
*0, disabled.
[    0.167423] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.167561] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.167706] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.168044] vgaarb: device added: 
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.168069] vgaarb: loaded
[    0.168077] vgaarb: bridge control possible 0000:00:02.0
[    0.168750] SCSI subsystem initialized
[    0.168764] ACPI: bus type scsi registered
[    0.168798] libata version 3.00 loaded.
[    0.168798] ACPI: bus type usb registered
[    0.168798] usbcore: registered new interface driver usbfs
[    0.168798] usbcore: registered new interface driver hub
[    0.168798] usbcore: registered new device driver usb
[    0.172040] PCI: Using ACPI for IRQ routing
[    0.172117] PCI: pci_cache_line_size set to 64 bytes
[    0.172250] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.172256] e820: reserve RAM buffer [mem 0x7f690000-0x7fffffff]
[    0.172491] NetLabel: Initializing
[    0.172503] NetLabel:  domain hash size = 128
[    0.172512] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.172540] NetLabel:  unlabeled traffic allowed by default
[    0.172586] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.172586] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.172586] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.174267] Switching to clocksource hpet
[    0.187170] AppArmor: AppArmor Filesystem Enabled
[    0.187243] pnp: PnP ACPI init
[    0.187281] ACPI: bus type pnp registered
[    0.187435] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.187452] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.187469] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.187572] pnp 00:01: [dma 4]
[    0.187631] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.187718] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.187850] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b 
(active)
[    0.187971] pnp 00:04: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 
SYN0002 PNP0f13 (active)
[    0.188083] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.188164] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.188557] system 00:07: [io  0x025c-0x025f] has been reserved
[    0.188575] system 00:07: [io  0x0380-0x0383] has been reserved
[    0.188589] system 00:07: [io  0x0400-0x041f] has been reserved
[    0.188602] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.188615] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.188628] system 00:07: [io  0x0480-0x04bf] has been reserved
[    0.188643] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.188657] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.188671] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.188685] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.188700] system 00:07: [mem 0xfff00000-0xffffffff] could not be reserved
[    0.188716] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.188910] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.189091] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.189109] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.189125] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.189269] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.189286] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.189851] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.189869] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.189884] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.189898] system 00:0b: [mem 0x00100000-0x7f6fffff] could not be reserved
[    0.189912] system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.189928] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.190337] pnp: PnP ACPI: found 12 devices
[    0.190349] ACPI: ACPI bus type pnp unregistered
[    0.190362] PnPBIOS: Disabled by ACPI PNP
[    0.230405] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] 
add_size 1000
[    0.230419] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit 
pref] to [bus 04] add_size 200000
[    0.230427] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to 
[bus 04] add_size 200000
[    0.230443] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 
02-03] add_size 1000
[    0.230460] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit 
pref] to [bus 01] add_size 200000
[    0.230483] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] 
get_res_add_size add_size 200000
[    0.230491] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] 
get_res_add_size add_size 200000
[    0.230498] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] 
get_res_add_size add_size 200000
[    0.230505] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size 
add_size 1000
[    0.230512] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size 
add_size 1000
[    0.230524] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f700000-0x7f8fffff]
[    0.230545] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f900000-0x7fafffff 
64bit pref]
[    0.230564] pci 0000:00:1c.3: BAR 15: assigned [mem 0x7fb00000-0x7fcfffff 
64bit pref]
[    0.230583] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.230598] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.230612] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.230626] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.230643] pci 0000:00:1c.0:   bridge window [mem 0x7f700000-0x7f8fffff]
[    0.230659] pci 0000:00:1c.0:   bridge window [mem 0x7f900000-0x7fafffff 
64bit pref]
[    0.230680] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.230693] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.230709] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.230724] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf6ffffff 
64bit pref]
[    0.230745] pci 0000:00:1c.3: PCI bridge to [bus 01]
[    0.230758] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.230774] pci 0000:00:1c.3:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.230790] pci 0000:00:1c.3:   bridge window [mem 0x7fb00000-0x7fcfffff 
64bit pref]
[    0.230810] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.230837] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.230880] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[    0.230928] pci 0000:00:1e.0: setting latency timer to 64
[    0.230938] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.230944] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.230950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.230957] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.230963] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff]
[    0.230969] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.230976] pci_bus 0000:04: resource 1 [mem 0x7f700000-0x7f8fffff]
[    0.230982] pci_bus 0000:04: resource 2 [mem 0x7f900000-0x7fafffff 64bit 
pref]
[    0.230988] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.230994] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.231001] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit 
pref]
[    0.231007] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.231013] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[    0.231020] pci_bus 0000:01: resource 2 [mem 0x7fb00000-0x7fcfffff 64bit 
pref]
[    0.231026] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.231033] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.231039] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.231045] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.231051] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff]
[    0.231120] NET: Registered protocol family 2
[    0.231423] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.231492] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.231556] TCP: Hash tables configured (established 8192 bind 8192)
[    0.231607] TCP: reno registered
[    0.231620] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.231644] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.231772] NET: Registered protocol family 1
[    0.231814] pci 0000:00:02.0: Boot video device
[    0.232098] PCI: CLS 32 bytes, default 64
[    0.232213] Trying to unpack rootfs image as initramfs...
[    1.504778] Freeing initrd memory: 30436k freed
[    1.528765] Initialise module verification
[    1.528869] audit: initializing netlink socket (disabled)
[    1.528900] type=2000 audit(1367055800.528:1): initialized
[    1.574440] bounce pool size: 64 pages
[    1.574475] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.578095] VFS: Disk quotas dquot_6.5.2
[    1.578232] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.579600] fuse init (API version 7.20)
[    1.579834] msgmni has been set to 1719
[    1.580914] Key type asymmetric registered
[    1.580932] Asymmetric key parser 'x509' registered
[    1.581041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
252)
[    1.581127] io scheduler noop registered
[    1.581144] io scheduler deadline registered (default)
[    1.581170] io scheduler cfq registered
[    1.581478] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.581642] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.581795] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    1.581959] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.582017] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.582164] intel_idle: MWAIT substates: 0x20220
[    1.582181] intel_idle: v0.4 model 0x1C
[    1.582187] intel_idle: lapic_timer_reliable_states 0x2
[    1.582192] tsc: Marking TSC unstable due to TSC halts in idle states deeper 
than C2
[    1.582409] ACPI: AC Adapter [AC0] (off-line)
[    1.582672] input: Lid Switch as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.587279] ACPI: Lid Switch [LID]
[    1.587388] input: Sleep Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.587410] ACPI: Sleep Button [SLPB]
[    1.587510] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.587530] ACPI: Power Button [PWRB]
[    1.587634] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.587652] ACPI: Power Button [PWRF]
[    1.587827] ACPI: Requesting acpi_cpufreq
[    1.613804] thermal LNXTHERM:00: registered as thermal_zone0
[    1.613823] ACPI: Thermal Zone [TZ00] (63 C)
[    1.613912] GHES: HEST is not enabled!
[    1.614174] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.614323] isapnp: Scanning for PnP cards...
[    1.618550] Linux agpgart interface v0.103
[    1.618729] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    1.618909] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 
262144K mappable
[    1.619126] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.619372] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.623788] brd: module loaded
[    1.626076] loop: module loaded
[    1.627253] libphy: Fixed MDIO Bus: probed
[    1.627491] tun: Universal TUN/TAP device driver, 1.6
[    1.627505] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.627647] PPP generic driver version 2.4.2
[    1.627769] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.627786] ehci-pci: EHCI PCI platform driver
[    1.627866] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    1.627876] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.627902] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus 
number 1
[    1.627942] ehci-pci 0000:00:1d.7: debug port 1
[    1.631865] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.631911] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[    1.640061] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.640148] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.640167] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.640187] usb usb1: Product: EHCI Host Controller
[    1.640201] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[    1.640217] usb usb1: SerialNumber: 0000:00:1d.7
[    1.640551] hub 1-0:1.0: USB hub found
[    1.640574] hub 1-0:1.0: 8 ports detected
[    1.641525] ehci-platform: EHCI generic platform driver
[    1.641566] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.641626] uhci_hcd: USB Universal Host Controller Interface driver
[    1.641699] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.641709] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.641734] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 2
[    1.641790] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[    1.641892] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.641911] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.641931] usb usb2: Product: UHCI Host Controller
[    1.641945] usb usb2: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[    1.641961] usb usb2: SerialNumber: 0000:00:1d.0
[    1.642262] hub 2-0:1.0: USB hub found
[    1.642284] hub 2-0:1.0: 2 ports detected
[    1.642585] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.642595] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.642620] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 3
[    1.642722] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[    1.642814] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.642833] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.642852] usb usb3: Product: UHCI Host Controller
[    1.642867] usb usb3: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[    1.642883] usb usb3: SerialNumber: 0000:00:1d.1
[    1.643168] hub 3-0:1.0: USB hub found
[    1.643196] hub 3-0:1.0: 2 ports detected
[    1.643494] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.643504] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.643533] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 4
[    1.643608] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[    1.643699] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.643718] usb usb4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.643737] usb usb4: Product: UHCI Host Controller
[    1.643752] usb usb4: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[    1.643768] usb usb4: SerialNumber: 0000:00:1d.2
[    1.644107] hub 4-0:1.0: USB hub found
[    1.644130] hub 4-0:1.0: 2 ports detected
[    1.644451] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.644461] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.644485] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus 
number 5
[    1.644562] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[    1.644655] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.644674] usb usb5: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.644693] usb usb5: Product: UHCI Host Controller
[    1.644708] usb usb5: Manufacturer: Linux 3.8.0-19-generic uhci_hcd
[    1.644723] usb usb5: SerialNumber: 0000:00:1d.3
[    1.645009] hub 5-0:1.0: USB hub found
[    1.645031] hub 5-0:1.0: 2 ports detected
[    1.645529] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 
0x60,0x64 irq 1,12
[    1.669375] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.669416] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.669763] mousedev: PS/2 mouse device common for all mice
[    1.670929] rtc_cmos 00:02: RTC can wake from S4
[    1.671149] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.671202] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.671510] device-mapper: uevent: version 1.0.3
[    1.671696] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: 
[email protected]
[    1.671765] EISA: Probing bus 0 at eisa.0
[    1.671779] EISA: Cannot allocate resource for mainboard
[    1.671793] Cannot allocate resource for EISA slot 1
[    1.671805] Cannot allocate resource for EISA slot 2
[    1.671818] Cannot allocate resource for EISA slot 3
[    1.671830] Cannot allocate resource for EISA slot 4
[    1.671842] Cannot allocate resource for EISA slot 5
[    1.671855] Cannot allocate resource for EISA slot 6
[    1.671867] Cannot allocate resource for EISA slot 7
[    1.671879] Cannot allocate resource for EISA slot 8
[    1.671892] EISA: Detected 0 cards.
[    1.671917] cpufreq-nforce2: No nForce2 chipset.
[    1.672094] cpuidle: using governor ladder
[    1.672251] cpuidle: using governor menu
[    1.672268] ledtrig-cpu: registered to indicate activity on CPUs
[    1.672282] EFI Variables Facility v0.08 2004-May-17
[    1.672894] ashmem: initialized
[    1.673229] TCP: cubic registered
[    1.673543] NET: Registered protocol family 10
[    1.674075] NET: Registered protocol family 17
[    1.674116] Key type dns_resolver registered
[    1.674601] Using IPI No-Shortcut mode
[    1.674832] Loading module verification certificates
[    1.689327] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 
fceb9fd088cf158e29d83343e1c98bf8ab23d94a'
[    1.689380] registered taskstats version 1
[    1.696739] Key type trusted registered
[    1.703719] Key type encrypted registered
[    1.711216] rtc_cmos 00:02: setting system clock to 2013-04-27 09:43:21 UTC 
(1367055801)
[    1.712512] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.712530] EDD information not available.
[    1.718562] input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input4
[    1.757595] ACPI: Battery Slot [BAT0] (battery present)
[    1.968339] isapnp: No Plug & Play device found
[    1.968479] Freeing unused kernel memory: 784k freed
[    1.969016] Write protecting the kernel text: 6252k
[    1.969159] Write protecting the kernel read-only data: 2432k
[    1.969173] NX-protecting the kernel data: 3988k
[    2.005923] udevd[99]: starting version 175
[    2.160473] wmi: Mapper loaded
[    2.198987] Disabling lock debugging due to kernel taint
[    2.216097] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.259345] [drm] Initialized drm 1.1.0 20060810
[    2.334947] ahci 0000:00:1f.2: version 3.0
[    2.335085] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    2.335226] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 
impl SATA mode
[    2.335259] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    2.335281] ahci 0000:00:1f.2: setting latency timer to 64
[    2.390098] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107
[    2.390282] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107
[    2.406308] microcode: Microcode Update Driver: v2.00 
<[email protected]>, Peter Oruba
[    2.419945] scsi0 : ahci
[    2.438798] scsi1 : ahci
[    2.442225] scsi2 : ahci
[    2.444179] scsi3 : ahci
[    2.444399] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 
irq 43
[    2.444424] ata2: DUMMY
[    2.444438] ata3: DUMMY
[    2.444451] ata4: DUMMY
[    2.471314] [drm:i915_dump_device_info], i915 device info: gen=3, 
pciid=0xa011 
flags=is_mobile,is_g33,need_gfx_hws,is_pineview,has_hotplug,has_overlay,
[    2.471345] pci 0000:00:02.0: setting latency timer to 64
[    2.471944] [drm:intel_opregion_setup], graphic opregion physical addr: 
0x7f69e0d4
[    2.471979] [drm:intel_opregion_setup], Public ACPI methods supported
[    2.471986] [drm:intel_opregion_setup], SWSCI supported
[    2.471992] [drm:intel_opregion_setup], ASLE supported
[    2.473219] pci 0000:00:02.0: irq 44 for MSI/MSI-X
[    2.473256] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.473277] [drm] No driver support for vblank timestamp query.
[    2.485926] ACPI Warning: _BQC returned an invalid level (20121018/video-494)
[    2.488821] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[    2.493372] acpi device:0d: registered as cooling_device2
[    2.493499] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.494310] input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    2.494604] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.627832] usb 1-6: New USB device found, idVendor=13d3, idProduct=5119
[    2.627853] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.627867] usb 1-6: Product: USB2.0 UVC VGA WebCam
[    2.627878] usb 1-6: Manufacturer: JMICRON TECHNOLOGIES CO., LTD.
[    2.627890] usb 1-6: SerialNumber: JMICRON V00.01
[    2.764144] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.765457] ata1.00: unexpected _GTF length (8)
[    2.765744] ata1.00: ATA-8: WDC WD1600BEVT-80A23T0, 01.01A01, max UDMA/133
[    2.765760] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.767144] ata1.00: unexpected _GTF length (8)
[    2.767431] ata1.00: configured for UDMA/133
[    2.767748] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-8 01.0 
PQ: 0 ANSI: 5
[    2.768252] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 
GiB)
[    2.768398] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.768595] sd 0:0:0:0: [sda] Write Protect is off
[    2.768616] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.768728] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    2.813377]  sda: sda1 sda2 < sda5 >
[    2.814538] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.868086] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    2.988077] usb 2-1: device descriptor read/64, error -71
[    3.212087] usb 2-1: device descriptor read/64, error -71
[    3.359494] [drm:i915_driver_open], 
[    3.428069] usb 2-1: new full-speed USB device number 3 using uhci_hcd
[    3.548134] usb 2-1: device descriptor read/64, error -71
[    3.772131] usb 2-1: device descriptor read/64, error -71
[    3.988132] usb 2-1: new full-speed USB device number 4 using uhci_hcd
[    4.396125] usb 2-1: device not accepting address 4, error -71
[    4.508131] usb 2-1: new full-speed USB device number 5 using uhci_hcd
[    4.916126] usb 2-1: device not accepting address 5, error -71
[    4.916153] hub 2-0:1.0: unable to enumerate USB device on port 1
[   19.752579] bio: create slab <bio-1> at 1
[   20.084399] bio: create slab <bio-1> at 1
[   25.824849] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: 
(null)
[   37.598314] Adding 2088956k swap on /dev/mapper/kubuntu--vg-swap_1.  
Priority:-1 extents:1 across:2088956k 
[   37.966137] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   38.123383] udevd[439]: starting version 175
[   38.614618] lp: driver loaded but no devices found
[   38.822788] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with 
Region \PMIO 1 (20121018/utaddress-251)
[   38.822812] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with 
Region \_SB_.PCI0.SBRG.IELK.GPSE 2 (20121018/utaddress-251)
[   38.822828] ACPI: If an ACPI driver is available for this device, you should 
use it instead of the native driver
[   38.822838] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with 
Region \_SB_.PCI0.SBRG.GPBX 1 (20121018/utaddress-251)
[   38.822853] ACPI: If an ACPI driver is available for this device, you should 
use it instead of the native driver
[   38.822861] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with 
Region \_SB_.PCI0.SBRG.GPBX 1 (20121018/utaddress-251)
[   38.822875] ACPI: If an ACPI driver is available for this device, you should 
use it instead of the native driver
[   38.822881] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   38.880274] cfg80211: Calling CRDA to update world regulatory domain
[   38.933021] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   38.965011] type=1400 audit(1367055838.750:2): apparmor="STATUS" 
operation="profile_load" name="/sbin/dhclient" pid=552 comm="apparmor_parser"
[   38.969486] type=1400 audit(1367055838.754:3): apparmor="STATUS" 
operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" 
pid=552 comm="apparmor_parser"
[   38.970324] type=1400 audit(1367055838.754:4): apparmor="STATUS" 
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" 
pid=552 comm="apparmor_parser"
[   39.115265] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   39.115275] Copyright(c) 2003-2012 Intel Corporation
[   39.115698] iwlwifi 0000:02:00.0: irq 45 for MSI/MSI-X
[   39.266370] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 
33692
[   39.506511] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   39.506524] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   39.506533] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   39.506541] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[   39.506549] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[   39.506559] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, 
REV=0x54
[   39.506713] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   39.509735] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[   39.603114] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   40.110873] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 
0x1a0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 570166
[   40.186674] input: SynPS/2 Synaptics TouchPad as 
/devices/platform/i8042/serio1/input/input6
[   40.343803] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   40.451438] input: HDA Intel Mic as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   40.453286] input: HDA Intel Headphone as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   40.539434] Linux video capture interface: v2.00
[   41.329271] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5119)
[   41.310132] asus_wmi: ASUS WMI generic driver loaded
[   41.336643] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.6
[   41.336954] asus_wmi: SFUN value: 0x0<6>[   41.339186] input: USB2.0 UVC VGA 
WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input9
[   41.339886] usbcore: registered new interface driver uvcvideo
[   41.339895] USB Video Class driver (1.1.1)
[   41.354363] input: Eee PC WMI hotkeys as 
/devices/platform/eeepc-wmi/input/input10
[   41.482668] asus_wmi: Backlight controlled by ACPI video driver
[   41.545336] cfg80211: World regulatory domain updated:
[   41.545348] cfg80211:   (start_freq - end_freq @ bandwidth), 
(max_antenna_gain, max_eirp)
[   41.545356] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[   41.545363] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 
2000 mBm)
[   41.545370] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 
2000 mBm)
[   41.545377] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[   41.545383] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 
2000 mBm)
[   41.840335] ppdev: user-space parallel port driver
[   42.043650] Bluetooth: Core ver 2.16
[   42.043762] NET: Registered protocol family 31
[   42.043769] Bluetooth: HCI device and connection manager initialized
[   42.044639] Bluetooth: HCI socket layer initialized
[   42.044655] Bluetooth: L2CAP socket layer initialized
[   42.044685] Bluetooth: SCO socket layer initialized
[   42.103569] Bluetooth: RFCOMM TTY layer initialized
[   42.103603] Bluetooth: RFCOMM socket layer initialized
[   42.103611] Bluetooth: RFCOMM ver 1.11
[   42.177200] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   42.177211] Bluetooth: BNEP filters: protocol multicast
[   42.177235] Bluetooth: BNEP socket layer initialized
[   42.420391] init: failsafe main process (922) killed by TERM signal
[   42.573423] type=1400 audit(1367055842.358:5): apparmor="STATUS" 
operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1012 
comm="apparmor_parser"
[   42.575178] type=1400 audit(1367055842.358:6): apparmor="STATUS" 
operation="profile_load" name="/usr/sbin/cupsd" pid=1012 comm="apparmor_parser"
[   42.635252] init: avahi-cups-reload main process (936) terminated with 
status 1
[   42.880695] type=1400 audit(1367055842.666:7): apparmor="STATUS" 
operation="profile_replace" name="/sbin/dhclient" pid=1051 
comm="apparmor_parser"
[   42.882243] type=1400 audit(1367055842.666:8): apparmor="STATUS" 
operation="profile_replace" 
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1051 
comm="apparmor_parser"
[   42.888644] type=1400 audit(1367055842.674:9): apparmor="STATUS" 
operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" 
pid=1051 comm="apparmor_parser"
[   42.923377] type=1400 audit(1367055842.706:10): apparmor="STATUS" 
operation="profile_load" 
name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1050 
comm="apparmor_parser"
[   42.925543] type=1400 audit(1367055842.710:11): apparmor="STATUS" 
operation="profile_load" 
name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" 
pid=1050 comm="apparmor_parser"


** Attachment added: "Xorg.0.log from a normal (blank) session, preferably with 
drm.debug=6 appended to the kernel commandline"
   
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1173267/+attachment/3655993/+files/Xorg.0.log

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1173267

Title:
  black screen (no video after post) on boot unless i use recovery, and
  then the resolution is incorrect

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1173267/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to