Hey Joseph, I followed your indications and keep receiving the same results. attached is the output
Humberto Portillo On Thu, May 23, 2013 at 10:48 AM, Joseph Salisbury < [email protected]> wrote: > You may need to run the following: > > sudo apt-get install -f > sudo apt-get clean > sudo apt-get update > > Then re-install the package. > > If that does not resolve your issue, please mark the bug as "Confirmed" > > ** Changed in: linux (Ubuntu) > Importance: Undecided => Low > > ** Changed in: linux (Ubuntu) > Status: Confirmed => Incomplete > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1182670 > > Title: > package linux-image-3.8.0-21-generic (not installed) failed to > install/upgrade: subprocess new pre-installation script returned error > exit status 1 > > Status in “linux” package in Ubuntu: > Incomplete > > Bug description: > # apt-get -f install > Reading package lists... Done > Building dependency tree > Reading state information... Done > Correcting dependencies... Done > The following packages were automatically installed and are no longer > required: > alien cpp-4.6 gir1.2-indicate-0.7 gtk2-engines-murrine libbabl-0.0-0 > libblas3gf libdconf0 libgegl-0.0-0 libgrail5 libindicate-gtk3 > libindicate5 > libkms1 libllvm3.0 libllvm3.1 libqpdf8 librpmbuild3 librpmsign1 > libsigsegv2 > libslp1 libwebp2 libx264-120 linux-headers-3.5.0-25 > linux-headers-3.5.0-25-generic linux-headers-3.5.0-26 > linux-headers-3.5.0-26-generic linux-headers-3.8.0-19 > linux-headers-3.8.0-19-generic linux-image-3.8.0-19-generic > linux-image-extra-3.8.0-19-generic lsb-core lubuntu-artwork-12-04 > lubuntu-artwork-12-10 m4 ncurses-term pax python-apport python-gpgme > python-launchpadlib python-lazr.restfulclient python-lazr.uri > python-oauth > python-simplejson python-virtkey python-wadllib python3.2 > python3.2-minimal > rpm > Use 'apt-get autoremove' to remove them. > The following extra packages will be installed: > linux-image-3.8.0-19-generic linux-image-3.8.0-21-generic > Suggested packages: > fdutils linux-doc-3.8.0 linux-source-3.8.0 linux-tools > The following NEW packages will be installed: > linux-image-3.8.0-19-generic linux-image-3.8.0-21-generic > 0 upgraded, 2 newly installed, 0 to remove and 12 not upgraded. > 7 not fully installed or removed. > Need to get 0 B/24.1 MB of archives. > After this operation, 52.8 MB of additional disk space will be used. > Do you want to continue [Y/n]? > WARNING: The following packages cannot be authenticated! > linux-image-3.8.0-21-generic linux-image-3.8.0-19-generic > Install these packages without verification [y/N]? Y > dpkg: warning: files list file for package > 'linux-image-3.2.0-37-generic' missing; assuming package has no files > currently installed > dpkg: warning: files list file for package > 'linux-image-3.2.0-23-generic' missing; assuming package has no files > currently installed > dpkg: warning: files list file for package > 'linux-image-3.2.0-36-generic' missing; assuming package has no files > currently installed > dpkg: warning: files list file for package > 'linux-image-3.2.0-35-generic' missing; assuming package has no files > currently installed > (Reading database ... 325992 files and directories currently installed.) > Unpacking linux-image-3.8.0-21-generic (from > .../linux-image-3.8.0-21-generic_3.8.0-21.32_i386.deb) ... > This kernel does not support a non-PAE CPU. > dpkg: error processing > /var/cache/apt/archives/linux-image-3.8.0-21-generic_3.8.0-21.32_i386.deb > (--unpack): > subprocess new pre-installation script returned error exit status 1 > Examining /etc/kernel/postrm.d . > run-parts: executing /etc/kernel/postrm.d/initramfs-tools > 3.8.0-21-generic /boot/vmlinuz-3.8.0-21-generic > run-parts: executing /etc/kernel/postrm.d/zz-update-grub > 3.8.0-21-generic /boot/vmlinuz-3.8.0-21-generic > Unpacking linux-image-3.8.0-19-generic (from > .../linux-image-3.8.0-19-generic_3.8.0-19.30_i386.deb) ... > This kernel does not support a non-PAE CPU. > dpkg: error processing > /var/cache/apt/archives/linux-image-3.8.0-19-generic_3.8.0-19.30_i386.deb > (--unpack): > subprocess new pre-installation script returned error exit status 1 > Examining /etc/kernel/postrm.d . > run-parts: executing /etc/kernel/postrm.d/initramfs-tools > 3.8.0-19-generic /boot/vmlinuz-3.8.0-19-generic > run-parts: executing /etc/kernel/postrm.d/zz-update-grub > 3.8.0-19-generic /boot/vmlinuz-3.8.0-19-generic > Errors were encountered while processing: > > /var/cache/apt/archives/linux-image-3.8.0-21-generic_3.8.0-21.32_i386.deb > > /var/cache/apt/archives/linux-image-3.8.0-19-generic_3.8.0-19.30_i386.deb > E: Sub-process /usr/bin/dpkg returned an error code (1) > > > ---------------------------- > 00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O > Controller [8086:3340] (rev 03) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] > Capabilities: [e4] Vendor Specific Information: Len=04 <?> > Capabilities: [a0] AGP version 2.0 > Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- > HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- > Rate=x4 > Kernel driver in use: agpgart-intel > > 00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP > Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 32 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: fc000000-fdffffff > Prefetchable memory behind bridge: e8000000-efffffff > Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Kernel modules: shpchp > > 00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if > 00 [UHCI]) > Subsystem: Intel Corporation Latitude D400/D500 [8086:4541] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 4: I/O ports at bf80 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if > 00 [UHCI]) > Subsystem: Intel Corporation Latitude D400/D500 [8086:4541] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 4: I/O ports at bf40 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if > 00 [UHCI]) > Subsystem: Intel Corporation Latitude D400/D500 [8086:4541] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 11 > Region 4: I/O ports at bf20 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM > (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI]) > Subsystem: Dell Latitude D600 [1028:011d] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin D routed to IRQ 11 > Region 0: Memory at f4fffc00 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=0080 > Kernel driver in use: ehci_hcd > > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge > [8086:2448] (rev 81) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR+ INTx- > Latency: 0 > Bus: primary=00, secondary=02, subordinate=0a, sec-latency=32 > I/O behind bridge: 0000d000-0000efff > Memory behind bridge: f6000000-fbffffff > Prefetchable memory behind bridge: 24000000-2bffffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Kernel modules: shpchp > > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC > Interface Bridge [8086:24cc] (rev 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Kernel modules: iTCO_wdt, intel-rng > > 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE > Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP]) > Subsystem: Intel Corporation Latitude D400/D500 [8086:4541] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at bfa0 [size=16] > Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K] > Kernel driver in use: ata_piix > > 00:1f.5 Multimedia audio controller [0401]: Intel Corporation > 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] > (rev 01) > Subsystem: Dell Device [1028:011d] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 5 > Region 0: I/O ports at b800 [size=256] > Region 1: I/O ports at bc40 [size=64] > Region 2: Memory at f4fff800 (32-bit, non-prefetchable) [size=512] > Region 3: Memory at f4fff400 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: snd_intel8x0 > Kernel modules: snd-intel8x0 > > 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if > 00 [Generic]) > Subsystem: Conexant Systems, Inc. D480 MDC V.9x Modem [14f1:5422] > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin B routed to IRQ 5 > Region 0: I/O ports at b400 [size=256] > Region 1: I/O ports at b080 [size=128] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel modules: snd-intel8x0m > > 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] > nee ATI RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] [1002:4c66] (rev 02) > (prog-if 00 [VGA controller]) > Subsystem: Dell Device [1028:011d] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ > ParErr- Stepping+ SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 32 (2000ns min), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at c000 [size=256] > Region 2: Memory at fcff0000 (32-bit, non-prefetchable) [size=64K] > [virtual] Expansion ROM at fc000000 [disabled] [size=128K] > Capabilities: [58] AGP version 2.0 > Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- > HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 > Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- > Rate=x4 > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: radeon > Kernel modules: radeon, radeonfb > > 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme > BCM5705M Gigabit Ethernet [14e4:165d] (rev ff) (prog-if ff) > !!! Unknown header type 7f > Kernel driver in use: tg3 > Kernel modules: tg3 > > 02:01.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711EC1 SmartCardBus > Controller [1217:7113] (rev 20) > Subsystem: Dell Device [1028:011d] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping+ SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 168 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 > Memory window 0: 28000000-2bffffff (prefetchable) > Memory window 1: 34000000-37ffffff > I/O window 0: 0000dc00-0000dcff > I/O window 1: 0000d800-0000d8ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ > PostWrite+ > 16-bit legacy interface ports at 0001 > Kernel driver in use: yenta_cardbus > Kernel modules: yenta_socket > > 02:01.1 CardBus bridge [0607]: O2 Micro, Inc. OZ711EC1 SmartCardBus > Controller [1217:7113] (rev 20) > Subsystem: Dell Device [1028:011d] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping+ SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 168 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at 2c000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176 > Memory window 0: 24000000-27ffffff (prefetchable) > Memory window 1: 30000000-33ffffff > I/O window 0: 0000d400-0000d4ff > I/O window 1: 0000d000-0000d0ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ > PostWrite+ > 16-bit legacy interface ports at 0001 > Kernel driver in use: yenta_cardbus > Kernel modules: yenta_socket > > 02:03.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN > 2100 3B Mini PCI Adapter [8086:1043] (rev 04) > Subsystem: Intel Corporation Device [8086:2565] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 32 (500ns min, 8500ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at fafef000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- > Kernel driver in use: ipw2100 > Kernel modules: ipw2100 > > > > --------------------------------- > Ubuntu 3.2.0-37.58-generic 3.2.35 > > > ---------------------------------- > Description: Ubuntu 13.04 > Release: 13.04 > > ------------------------------------ > > linux-image-3.8.0-19-generic: > Installed: (none) > Candidate: 3.8.0-19.30 > Version table: > 3.8.0-19.30 0 > 500 http://archive.ubuntu.com/ubuntu/ raring-updates/main i386 > Packages > 500 http://archive.ubuntu.com/ubuntu/ raring-security/main i386 > Packages > 3.8.0-19.29 0 > 500 http://archive.ubuntu.com/ubuntu/ raring/main i386 Packages > > ProblemType: Package > DistroRelease: Ubuntu 13.04 > Package: linux-image-3.8.0-21-generic (not installed) > ProcVersionSignature: Ubuntu 3.2.0-37.58-generic 3.2.35 > Uname: Linux 3.2.0-37-generic i686 > ApportVersion: 2.9.2-0ubuntu8 > Architecture: i386 > AudioDevicesInUse: > USER PID ACCESS COMMAND > /dev/snd/controlC0: humberto 1302 F.... pulseaudio > CRDA: Error: [Errno 2] No such file or directory: 'iw' > Date: Tue May 21 16:20:17 2013 > DpkgTerminalLog: > Unpacking linux-image-3.8.0-21-generic (from > .../linux-image-3.8.0-21-generic_3.8.0-21.32_i386.deb) ... > This kernel does not support a non-PAE CPU. > dpkg: error processing > /var/cache/apt/archives/linux-image-3.8.0-21-generic_3.8.0-21.32_i386.deb > (--unpack): > subprocess new pre-installation script returned error exit status 1 > DuplicateSignature: > Unpacking linux-image-3.8.0-21-generic (from > .../linux-image-3.8.0-21-generic_3.8.0-21.32_i386.deb) ... > This kernel does not support a non-PAE CPU. > dpkg: error processing > /var/cache/apt/archives/linux-image-3.8.0-21-generic_3.8.0-21.32_i386.deb > (--unpack): > subprocess new pre-installation script returned error exit status 1 > ErrorMessage: subprocess new pre-installation script returned error exit > status 1 > HibernationDevice: RESUME=UUID=4e28fd00-61c4-49b1-b3ce-e0229d26abee > InstallationDate: Installed on 2012-12-28 (144 days ago) > InstallationMedia: Lubuntu 12.04 "Precise Pangolin" - Release i386 > (20120423) > Lsusb: > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > MachineType: Dell Computer Corporation Latitude D600 > MarkForUpload: True > ProcFB: 0 radeondrmfb > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-37-generic > root=UUID=b8166e2e-94c6-4477-874b-a06de9eab7e0 ro quiet splash vt.handoff=7 > PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No > PulseAudio daemon running, or not running as session daemon. > RelatedPackageVersions: grub-pc 2.00-13ubuntu3 > RfKill: > 0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > SourcePackage: linux > Title: package linux-image-3.8.0-21-generic (not installed) failed to > install/upgrade: subprocess new pre-installation script returned error exit > status 1 > UpgradeStatus: Upgraded to raring on 2013-05-01 (20 days ago) > dmi.bios.date: 06/29/2005 > dmi.bios.vendor: Dell Computer Corporation > dmi.bios.version: A16 > dmi.board.name: 0G5152 > dmi.board.vendor: Dell Computer Corporation > dmi.chassis.type: 8 > dmi.chassis.vendor: Dell Computer Corporation > dmi.modalias: > dmi:bvnDellComputerCorporation:bvrA16:bd06/29/2005:svnDellComputerCorporation:pnLatitudeD600:pvr:rvnDellComputerCorporation:rn0G5152:rvr:cvnDellComputerCorporation:ct8:cvr: > dmi.product.name: Latitude D600 > dmi.sys.vendor: Dell Computer Corporation > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1182670/+subscriptions > ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed ** Attachment added: "output.txt" https://bugs.launchpad.net/bugs/1182670/+attachment/3684936/+files/output.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1182670 Title: package linux-image-3.8.0-21-generic (not installed) failed to install/upgrade: subprocess new pre-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1182670/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
