Update to this. After replacing the kernel files from a kernel tarball, the issue had been solved after reboot. However, after rebooting again, the issue has returned.
[ 1.486732] usb usb2: Product: EHCI Host Controller [ 1.486734] usb usb2: Manufacturer: Linux 3.8.0-27-generic ehci_hcd [ 1.486735] usb usb2: SerialNumber: 0000:00:13.2 [ 1.487069] hub 2-0:1.0: USB hub found [ 1.487077] hub 2-0:1.0: 5 ports detected [ 1.487296] ehci-platform: EHCI generic platform driver [ 1.487306] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.487396] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.487401] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.487432] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf044f000 [ 1.546676] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.546682] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.546684] usb usb3: Product: OHCI Host Controller [ 1.546686] usb usb3: Manufacturer: Linux 3.8.0-27-generic ohci_hcd [ 1.546687] usb usb3: SerialNumber: 0000:00:12.0 [ 1.547015] hub 3-0:1.0: USB hub found [ 1.547024] hub 3-0:1.0: 5 ports detected [ 1.547246] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.547252] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 1.547270] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf044d000 [ 1.606658] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.606663] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.606666] usb usb4: Product: OHCI Host Controller [ 1.606667] usb usb4: Manufacturer: Linux 3.8.0-27-generic ohci_hcd [ 1.606669] usb usb4: SerialNumber: 0000:00:13.0 [ 1.606994] hub 4-0:1.0: USB hub found [ 1.607003] hub 4-0:1.0: 5 ports detected [ 1.607199] uhci_hcd: USB Universal Host Controller Interface driver [ 1.607302] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.607308] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 1.607558] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X [ 1.607564] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X [ 1.607570] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X [ 1.607575] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X [ 1.607581] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X [ 1.607671] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.607673] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.607675] usb usb5: Product: xHCI Host Controller [ 1.607677] usb usb5: Manufacturer: Linux 3.8.0-27-generic xhci_hcd [ 1.607678] usb usb5: SerialNumber: 0000:00:10.0 [ 1.607909] xHCI xhci_add_endpoint called for root hub [ 1.607912] xHCI xhci_check_bandwidth called for root hub [ 1.607938] hub 5-0:1.0: USB hub found [ 1.607991] hub 5-0:1.0: 2 ports detected [ 1.608139] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.608143] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [ 1.610915] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.610917] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.610919] usb usb6: Product: xHCI Host Controller [ 1.610920] usb usb6: Manufacturer: Linux 3.8.0-27-generic xhci_hcd [ 1.610922] usb usb6: SerialNumber: 0000:00:10.0 [ 1.611165] xHCI xhci_add_endpoint called for root hub [ 1.611169] xHCI xhci_check_bandwidth called for root hub [ 1.611197] hub 6-0:1.0: USB hub found [ 1.611251] hub 6-0:1.0: 2 ports detected [ 1.611582] xhci_hcd 0000:00:10.1: xHCI Host Controller [ 1.611603] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7 [ 1.611858] xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X [ 1.611864] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X [ 1.611870] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X [ 1.611876] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X [ 1.611881] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X [ 1.611986] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.611988] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.611990] usb usb7: Product: xHCI Host Controller [ 1.611992] usb usb7: Manufacturer: Linux 3.8.0-27-generic xhci_hcd [ 1.611993] usb usb7: SerialNumber: 0000:00:10.1 [ 1.612236] xHCI xhci_add_endpoint called for root hub [ 1.612241] xHCI xhci_check_bandwidth called for root hub [ 1.612269] hub 7-0:1.0: USB hub found [ 1.612322] hub 7-0:1.0: 2 ports detected [ 1.612470] xhci_hcd 0000:00:10.1: xHCI Host Controller [ 1.612475] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8 [ 1.615219] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.615221] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.615223] usb usb8: Product: xHCI Host Controller [ 1.615225] usb usb8: Manufacturer: Linux 3.8.0-27-generic xhci_hcd [ 1.615226] usb usb8: SerialNumber: 0000:00:10.1 [ 1.615467] xHCI xhci_add_endpoint called for root hub [ 1.615471] xHCI xhci_check_bandwidth called for root hub [ 1.615501] hub 8-0:1.0: USB hub found [ 1.615555] hub 8-0:1.0: 2 ports detected [ 1.615849] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.622891] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.622899] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.623089] mousedev: PS/2 mouse device common for all mice [ 1.623418] rtc_cmos 00:04: RTC can wake from S4 [ 1.623558] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.623582] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.623667] device-mapper: uevent: version 1.0.3 [ 1.623773] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-de...@redhat.com [ 1.623878] cpuidle: using governor ladder [ 1.623989] cpuidle: using governor menu [ 1.623993] ledtrig-cpu: registered to indicate activity on CPUs [ 1.623995] EFI Variables Facility v0.08 2004-May-17 [ 1.624415] ashmem: initialized [ 1.624586] TCP: cubic registered [ 1.624675] NET: Registered protocol family 10 [ 1.624853] NET: Registered protocol family 17 [ 1.624863] Key type dns_resolver registered [ 1.625254] Loading module verification certificates [ 1.626282] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: b19078b01b96b975438ce0719f8a7eb15318eb67' [ 1.626294] registered taskstats version 1 [ 1.628958] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.629537] Key type trusted registered [ 1.631682] Key type encrypted registered [ 1.634636] rtc_cmos 00:04: setting system clock to 2013-08-07 02:36:45 UTC (1375843005) [ 1.634714] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead. [ 1.635958] acpi-cpufreq: overriding BIOS provided _PSD data [ 1.636318] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.636320] EDD information not available. [ 1.637753] Freeing unused kernel memory: 996k freed [ 1.638003] Write protecting the kernel read-only data: 12288k [ 1.641391] Freeing unused kernel memory: 1168k freed [ 1.644948] Freeing unused kernel memory: 1080k freed [ 1.664233] udevd[106]: starting version 175 [ 1.773482] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.773760] r8169 0000:02:00.0: irq 51 for MSI/MSI-X [ 1.773962] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004e98000, 08:2e:5f:95:79:b2, XID 0c900800 IRQ 51 [ 1.773966] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.777038] rtsx_pci 0000:04:00.0: irq 52 for MSI/MSI-X [ 1.777058] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 52 [ 1.782019] sdhci: Secure Digital Host Controller Interface driver [ 1.782025] sdhci: Copyright(c) Pierre Ossman [ 1.784188] sdhci-pci 0000:04:00.1: SDHCI controller found [10ec:5209] (rev 1) [ 1.784251] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.784260] mmc0: no vqmmc regulator found [ 1.784263] mmc0: no vmmc regulator found [ 1.784288] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.784432] Disabling lock debugging due to kernel taint [ 1.785232] ahci 0000:00:11.0: version 3.0 [ 1.785315] ahci 0000:00:11.0: irq 53 for MSI/MSI-X [ 1.785386] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x5 impl SATA mode [ 1.785390] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs [ 1.785855] scsi0 : ahci [ 1.786216] scsi1 : ahci [ 1.786389] scsi2 : ahci [ 1.786476] ata1: SATA max UDMA/133 abar m2048@0xf0450000 port 0xf0450100 irq 53 [ 1.786477] ata2: DUMMY [ 1.786480] ata3: SATA max UDMA/133 abar m2048@0xf0450000 port 0xf0450200 irq 53 [ 1.795659] scsi3 : pata_atiixp [ 1.796171] scsi4 : pata_atiixp [ 1.796597] ata4: PATA max UDMA/100 cmd 0x4128 ctl 0x4144 bmdma 0x4100 irq 17 [ 1.796601] ata5: PATA max UDMA/100 cmd 0x4120 ctl 0x4140 bmdma 0x4108 irq 17 [ 1.817563] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.818588] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA [ 1.853979] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.889664] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.925656] sdhci-pci 0000:04:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.970434] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.228190] usb 2-1: New USB device found, idVendor=5986, idProduct=02ac [ 2.228202] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.228209] usb 2-1: Product: HP TrueVision HD [ 2.228214] usb 2-1: Manufacturer: HP TrueVision HD [ 2.228219] usb 2-1: SerialNumber: 0x0003 [ 2.278498] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.278537] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.279378] ata1.00: ATA-8: SAMSUNG SSD PM830 2.5" 7mm 128GB, CXM02D1Q, max UDMA/133 [ 2.279385] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.279848] ata1.00: configured for UDMA/133 [ 2.280382] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 CXM0 PQ: 0 ANSI: 5 [ 2.280679] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.280744] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.281140] sd 0:0:0:0: [sda] Write Protect is off [ 2.281146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.281389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.281827] ata3.00: ATAPI: hp DVD A DS8A8SH, KH61, max UDMA/100 [ 2.282554] sda: sda1 sda2 < sda5 > [ 2.282898] ata3.00: configured for UDMA/100 [ 2.283601] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.292803] scsi 2:0:0:0: CD-ROM hp DVD A DS8A8SH KH61 PQ: 0 ANSI: 5 [ 2.308617] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.308624] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.309000] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.309176] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.342293] tsc: Refined TSC clocksource calibration: 1597.095 MHz [ 2.342302] Switching to clocksource tsc [ 2.358859] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.714396] Adding 7839740k swap on /dev/sda5. Priority:-1 extents:1 across:7839740k SS [ 2.750381] usb 4-2: new full-speed USB device number 2 using ohci_hcd [ 2.915388] usb 4-2: New USB device found, idVendor=138a, idProduct=0018 [ 2.915393] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2.915395] usb 4-2: SerialNumber: 80be835a704a [ 3.015579] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.026112] usb 7-1: new low-speed USB device number 2 using xhci_hcd [ 3.077019] usb 7-1: New USB device found, idVendor=03f0, idProduct=0024 [ 3.077024] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.077027] usb 7-1: Product: HP Basic USB Keyboard [ 3.077029] usb 7-1: Manufacturer: CHICONY [ 3.077271] usb 7-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.098551] udevd[370]: starting version 175 [ 3.190599] mmc1: error -110 whilst initialising SD card [ 3.214030] usb 3-2: new low-speed USB device number 2 using ohci_hcd [ 3.246738] lp: driver loaded but no devices found [ 3.264280] AMD IOMMUv2 driver by Joerg Roedel <joerg.roe...@amd.com> [ 3.264286] AMD IOMMUv2 functionality not available on this system [ 3.274533] type=1400 audit(1375843007.137:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=464 comm="apparmor_parser" [ 3.275153] type=1400 audit(1375843007.137:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=464 comm="apparmor_parser" [ 3.275513] type=1400 audit(1375843007.137:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=464 comm="apparmor_parser" [ 3.329389] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20121018/utaddress-251) [ 3.329401] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.330292] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 3.338950] hp_accel: laptop model unknown, using default axes configuration [ 3.361410] cfg80211: Calling CRDA to update world regulatory domain [ 3.365950] snd_hda_intel 0000:00:01.1: irq 54 for MSI/MSI-X [ 3.379446] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7236 MBytes. [ 3.379563] <6>[fglrx] vendor: 1002 device: 9641 count: 1 [ 3.379927] <6>[fglrx] vendor: 1002 device: 6741 count: 2 [ 3.380194] <6>[fglrx] ioport: bar 1, base 0x4000, size: 0x100 [ 3.380619] <6>[fglrx] ioport: bar 4, base 0x3000, size: 0x100 [ 3.380628] pci 0000:01:00.0: enabling device (0000 -> 0003) [ 3.380795] <6>[fglrx] Kernel PAT support is enabled [ 3.380826] <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 2 minors [ 3.383564] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4 [ 3.390331] usb 3-2: New USB device found, idVendor=1bcf, idProduct=000c [ 3.390338] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.390342] usb 3-2: Product: USB Laser Wheel Mouse [ 3.406114] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 3.406953] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20121018/dsfield-211) [ 3.406966] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff880203e6ecf8), AE_ALREADY_EXISTS (20121018/psparse-537) [ 3.406985] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20121018/ac-122) [ 3.423130] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input5 [ 3.423263] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error [ 3.423275] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 [ 3.452571] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 3.507537] Linux video capture interface: v2.00 [ 3.522400] uvcvideo: Found UVC 1.00 device HP TrueVision HD (5986:02ac) [ 3.540133] input: HP TrueVision HD as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input7 [ 3.540232] usbcore: registered new interface driver uvcvideo [ 3.540234] USB Video Class driver (1.1.1) [ 3.555394] usbcore: registered new interface driver usbhid [ 3.555399] usbhid: USB HID core driver [ 3.592113] microcode: CPU0: patch_level=0x03000027 [ 3.595655] microcode: CPU1: patch_level=0x03000027 [ 3.595705] microcode: CPU2: patch_level=0x03000027 [ 3.595723] microcode: CPU3: patch_level=0x03000027 [ 3.599976] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba [ 3.655907] kvm: Nested Virtualization enabled [ 3.655914] kvm: Nested Paging enabled [ 3.753823] Bluetooth: Core ver 2.16 [ 3.765462] NET: Registered protocol family 31 [ 3.765469] Bluetooth: HCI device and connection manager initialized [ 3.765482] Bluetooth: HCI socket layer initialized [ 3.765486] Bluetooth: L2CAP socket layer initialized [ 3.765497] Bluetooth: SCO socket layer initialized [ 3.783623] acpi device:01: registered as cooling_device4 [ 3.783660] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.783715] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 3.796755] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.796761] Bluetooth: BNEP filters: protocol multicast [ 3.796774] Bluetooth: BNEP socket layer initialized [ 3.797911] Bluetooth: RFCOMM TTY layer initialized [ 3.797929] Bluetooth: RFCOMM socket layer initialized [ 3.797931] Bluetooth: RFCOMM ver 1.11 [ 3.820493] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb7/7-1/7-1:1.0/input/input9 [ 3.827341] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:10.1-1/input0 [ 3.827707] input: USB Laser Wheel Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input10 [ 3.830390] hid-generic 0003:1BCF:000C.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [USB Laser Wheel Mouse] on usb-0000:00:12.0-2/input0 [ 3.843028] cfg80211: World regulatory domain updated: [ 3.843035] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3.843038] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.843041] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3.843044] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3.843046] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.843049] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3.870708] ppdev: user-space parallel port driver [ 3.884343] init: avahi-cups-reload main process (864) terminated with status 1 [ 3.927366] acpi device:05: registered as cooling_device5 [ 3.927408] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 3.927509] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input11 [ 3.928835] type=1400 audit(1375843007.789:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=921 comm="apparmor_parser" [ 3.929638] type=1400 audit(1375843007.789:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=921 comm="apparmor_parser" [ 3.967980] init: failsafe main process (897) killed by TERM signal [ 4.045382] type=1400 audit(1375843007.905:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=989 comm="apparmor_parser" [ 4.046141] type=1400 audit(1375843007.909:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=989 comm="apparmor_parser" [ 4.048960] type=1400 audit(1375843007.909:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=991 comm="apparmor_parser" [ 4.050315] type=1400 audit(1375843007.913:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=991 comm="apparmor_parser" [ 4.291801] r8169 0000:02:00.0 eth0: link down [ 4.291906] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.292476] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.342153] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4.342567] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4.659744] mmc1: error -110 whilst initialising SD card [ 6.045615] mmc1: error -110 whilst initialising SD card [ 123.364976] init: udevtrigger post-stop process (397) terminated with status 1 [ 123.376927] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 123.376936] vesafb: scrolling: redraw [ 123.376945] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 123.379867] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005780000, using 4160k, total 4160k [ 123.380296] Console: switching to colour frame buffer device 170x48 [ 123.390487] fb0: VESA VGA frame buffer device [ 123.444575] init: plymouth-splash main process (1332) terminated with status 1 [ 124.558660] fglrx_pci 0000:00:01.0: irq 55 for MSI/MSI-X [ 124.559578] <6>[fglrx] Firegl kernel thread PID: 1350 [ 124.559847] <6>[fglrx] Firegl kernel thread PID: 1351 [ 124.560090] <6>[fglrx] Firegl kernel thread PID: 1352 [ 124.560241] <6>[fglrx] IRQ 55 Enabled [ 124.570857] <6>[fglrx] Gart USWC size:1280 M. [ 124.570859] <6>[fglrx] Gart cacheable size:508 M. [ 124.570864] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 124.570865] <6>[fglrx] Reserved FB block: Unshared offset:fbfc000, size:404000 [ 124.570867] <6>[fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000 [ 124.601117] vgaarb: this pci device is not a vga device [ 124.601151] vgaarb: this pci device is not a vga device [ 124.601166] vgaarb: this pci device is not a vga device [ 124.601180] vgaarb: this pci device is not a vga device [ 124.601195] vgaarb: this pci device is not a vga device [ 124.601210] vgaarb: this pci device is not a vga device [ 124.601225] vgaarb: this pci device is not a vga device [ 124.601240] vgaarb: this pci device is not a vga device [ 124.601256] vgaarb: this pci device is not a vga device [ 124.601299] vgaarb: this pci device is not a vga device [ 124.601310] vgaarb: this pci device is not a vga device [ 124.601320] vgaarb: this pci device is not a vga device [ 124.601331] vgaarb: this pci device is not a vga device [ 124.601342] vgaarb: this pci device is not a vga device [ 124.601354] vgaarb: this pci device is not a vga device [ 124.601365] vgaarb: this pci device is not a vga device [ 124.601378] vgaarb: this pci device is not a vga device [ 124.601389] vgaarb: this pci device is not a vga device [ 124.601402] vgaarb: this pci device is not a vga device [ 124.601414] vgaarb: this pci device is not a vga device [ 124.601427] vgaarb: this pci device is not a vga device [ 124.601439] vgaarb: this pci device is not a vga device [ 124.601452] vgaarb: this pci device is not a vga device [ 124.601464] vgaarb: this pci device is not a vga device [ 124.601477] vgaarb: this pci device is not a vga device [ 124.601490] vgaarb: this pci device is not a vga device [ 124.601514] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 124.601537] vgaarb: this pci device is not a vga device [ 124.601551] vgaarb: this pci device is not a vga device [ 124.601566] vgaarb: this pci device is not a vga device [ 124.601581] vgaarb: this pci device is not a vga device [ 128.693367] fglrx_pci 0000:01:00.0: irq 56 for MSI/MSI-X [ 128.694101] <6>[fglrx] Firegl kernel thread PID: 1355 [ 128.694294] <6>[fglrx] Firegl kernel thread PID: 1356 [ 128.694730] <6>[fglrx] Firegl kernel thread PID: 1357 [ 128.695067] <6>[fglrx] IRQ 56 Enabled [ 128.748110] <6>[fglrx] Gart USWC size:1280 M. [ 128.748120] <6>[fglrx] Gart cacheable size:508 M. [ 128.748131] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 128.748137] <6>[fglrx] Reserved FB block: Unshared offset:f8fc000, size:404000 [ 128.748142] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 128.773280] <6>[fglrx] ATIF platform detected with notification ID: 0x81 [ 128.929031] <6>[fglrx] ATIF platform detected with notification ID: 0x81 [ 172.647973] systemd-hostnamed[2281]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 197.513811] wlan0: authenticate with 00:23:68:74:a0:91 [ 197.528469] wlan0: send auth to 00:23:68:74:a0:91 (try 1/3) [ 197.529915] wlan0: authenticated [ 197.532396] wlan0: associate with 00:23:68:74:a0:91 (try 1/3) [ 197.537181] wlan0: RX AssocResp from 00:23:68:74:a0:91 (capab=0x8411 status=0 aid=1) [ 197.537320] wlan0: associated [ 197.537411] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 197.537563] cfg80211: Calling CRDA for country: US [ 197.548532] cfg80211: Regulatory domain changed to country: US [ 197.548541] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 197.548549] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 197.548556] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 197.548561] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 197.548566] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 197.548570] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 197.548575] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 205.913832] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC__.EGRW] (Node ffff880203e6b410), AE_AML_INFINITE_LOOP (20121018/psparse-537) [ 205.913864] ACPI Error: Method parse/execution failed [\_SB_.ACEL.ALRD] (Node ffff880203e6eed8), AE_AML_INFINITE_LOOP (20121018/psparse-537) [ 205.913890] lis3lv02d: unknown sensor type 0x0 [ 205.913910] hp_accel: probe of HPQ0004:00 failed with error -22 [ 205.914536] wmi: Mapper loaded [ 205.930848] input: HP WMI hotkeys as /devices/virtual/input/input12 [ 221.030321] wlan0: authenticate with 5c:0e:8b:1e:7d:b1 [ 221.038627] wlan0: send auth to 5c:0e:8b:1e:7d:b1 (try 1/3) [ 221.038864] cfg80211: Calling CRDA to update world regulatory domain [ 221.040038] wlan0: authenticated [ 221.046590] cfg80211: World regulatory domain updated: [ 221.046596] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 221.046600] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 221.046604] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 221.046606] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 221.046609] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 221.046611] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 221.046821] wlan0: associate with 5c:0e:8b:1e:7d:b1 (try 1/3) [ 221.054529] wlan0: RX AssocResp from 5c:0e:8b:1e:7d:b1 (capab=0x8411 status=0 aid=1) [ 221.054607] wlan0: associated [ 221.054681] cfg80211: Calling CRDA for country: US [ 221.060287] cfg80211: Regulatory domain changed to country: US [ 221.060292] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 221.060295] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 221.060299] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 221.060301] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 221.060304] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 221.060306] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 221.060308] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 287.481607] mmc1: error -110 whilst initialising SD card [ 288.877101] mmc1: error -110 whilst initialising SD card [ 290.252688] mmc1: error -110 whilst initialising SD card sam@Sam-HPLaptop:~$ -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1209047 Title: SD Card not loading in Ubuntu 13.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1209047/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
