Thank you for your help. Here is the information, you have asked for: 1. Please include the output of the command "uname -a" in your next response. It should be one, long line of text which includes the exact kernel version you're running, as well as the CPU architecture.
Linux ubuntu 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux 2. Please run the command "dmesg > dmesg.log" and attach the resulting file "dmesg.log" to this bug report. [ 0.000000] Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fe50000 end: 000000001ff50000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000001ff50000 size: 0000000000017000 end: 000000001ff67000 type: 3 [ 0.000000] copy_e820_map() start: 000000001ff67000 size: 0000000000012000 end: 000000001ff79000 type: 4 [ 0.000000] copy_e820_map() start: 000000001ff80000 size: 0000000000080000 end: 0000000020000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff50000 (usable) [ 0.000000] BIOS-e820: 000000001ff50000 - 000000001ff67000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff67000 - 000000001ff79000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130896) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130896 [ 0.000000] HighMem 130896 -> 130896 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130896 [ 0.000000] On node 0 totalpages: 130896 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125810 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v002 IBM ) @ 0x000f6d70 [ 0.000000] ACPI: XSDT (v001 IBM TP-1R 0x00003210 LTP 0x00000000) @ 0x1ff5a6bd [ 0.000000] ACPI: FADT (v003 IBM TP-1R 0x00003210 IBM 0x00000001) @ 0x1ff5a800 [ 0.000000] ACPI: SSDT (v001 IBM TP-1R 0x00003210 MSFT 0x0100000e) @ 0x1ff5a9b4 [ 0.000000] ACPI: ECDT (v001 IBM TP-1R 0x00003210 IBM 0x00000001) @ 0x1ff66ecc [ 0.000000] ACPI: TCPA (v001 IBM TP-1R 0x00003210 PTL 0x00000001) @ 0x1ff66f1e [ 0.000000] ACPI: BOOT (v001 IBM TP-1R 0x00003210 LTP 0x00000001) @ 0x1ff66fd8 [ 0.000000] ACPI: DSDT (v001 IBM TP-1R 0x00003210 MSFT 0x0100000e) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) [ 0.000000] Detected 598.069 MHz processor. [ 17.592274] Built 1 zonelists. Total pages: 129874 [ 17.592283] Kernel command line: find=/wubi/boot/linux ro quiet splash [ 17.592775] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 17.592789] mapped APIC to ffffd000 (0140a000) [ 17.592797] Enabling fast FPU save and restore... done. [ 17.592805] Enabling unmasked SIMD FPU exception support... done. [ 17.592825] Initializing CPU#0 [ 17.592912] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 17.594549] Console: colour VGA+ 80x25 [ 17.594927] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 17.595461] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 17.625731] Memory: 507448k/523584k available (1992k kernel code, 15568k reserved, 900k data, 328k init, 0k highmem) [ 17.625761] virtual kernel memory layout: [ 17.625765] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 17.625769] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 17.625773] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 17.625777] lowmem : 0xc0000000 - 0xdff50000 ( 511 MB) [ 17.625780] .init : 0xc03d9000 - 0xc042b000 ( 328 kB) [ 17.625784] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB) [ 17.625788] .text : 0xc0100000 - 0xc02f2374 (1992 kB) [ 17.625798] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 17.704912] Calibrating delay using timer specific routine.. 1197.39 BogoMIPS (lpj=2394783) [ 17.705022] Security Framework v1.0.0 initialized [ 17.705036] SELinux: Disabled at boot. [ 17.705082] Mount-cache hash table entries: 512 [ 17.705388] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 [ 17.705417] CPU: L1 I cache: 32K, L1 D cache: 32K [ 17.705425] CPU: L2 cache: 1024K [ 17.705431] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 [ 17.705455] Compat vDSO mapped to ffffe000. [ 17.705465] Remapping vsyscall page to ffffe000 [ 17.705489] Checking 'hlt' instruction... OK. [ 17.721139] SMP alternatives: switching to UP code [ 17.721516] Freeing SMP alternatives: 11k freed [ 17.721963] Early unpacking initramfs... done [ 18.719699] ACPI: Core revision 20060707 [ 18.720390] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 18.732884] ACPI: setting ELCR to 0200 (from 0800) [ 18.743798] CPU0: Intel(R) Pentium(R) M processor 1500MHz stepping 05 [ 18.743811] SMP motherboard not detected. [ 18.743817] Local APIC not detected. Using dummy APIC emulation. [ 18.743887] Brought up 1 CPUs [ 18.744437] Booting paravirtualized kernel on bare hardware [ 18.744541] Time: 0:42:24 Date: 07/09/107 [ 18.744604] NET: Registered protocol family 16 [ 18.744775] EISA bus registered [ 18.744784] ACPI: bus type pci registered [ 18.744964] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 [ 18.744970] PCI: Using configuration type 1 [ 18.744975] Setting up standard PCI resources [ 18.773450] ACPI: Interpreter enabled [ 18.773457] ACPI: Using PIC for interrupt routing [ 18.775328] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 18.776854] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 18.778369] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 18.779875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 18.781392] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 18.782784] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 18.784167] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 18.785702] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 18.786670] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.786681] PCI: Probing PCI hardware (bus 00) [ 18.790224] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 18.790234] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 18.790603] Boot video device is 0000:01:00.0 [ 18.790821] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 18.790911] PCI: Transparent bridge - 0000:00:1e.0 [ 18.791130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.804189] ACPI: Power Resource [PUBS] (on) [ 18.806095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 18.806749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 18.811960] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.811982] pnp: PnP ACPI init [ 18.822730] pnp: PnP ACPI: found 13 devices [ 18.822740] PnPBIOS: Disabled by ACPI PNP [ 18.822842] PCI: Using ACPI for IRQ routing [ 18.822851] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.835506] NET: Registered protocol family 8 [ 18.835512] NET: Registered protocol family 20 [ 18.837912] PCI: Bridge: 0000:00:01.0 [ 18.837919] IO window: 3000-3fff [ 18.837929] MEM window: c0100000-c01fffff [ 18.837937] PREFETCH window: e0000000-e7ffffff [ 18.837954] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 18.837961] IO window: 00004000-000040ff [ 18.837970] IO window: 00004400-000044ff [ 18.837979] PREFETCH window: e8000000-ebffffff [ 18.837988] MEM window: c4000000-c7ffffff [ 18.837997] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 18.838003] IO window: 00004800-000048ff [ 18.838011] IO window: 00004c00-00004cff [ 18.838020] PREFETCH window: ec000000-efffffff [ 18.838030] MEM window: c8000000-cbffffff [ 18.838037] PCI: Bridge: 0000:00:1e.0 [ 18.838044] IO window: 4000-8fff [ 18.838055] MEM window: c0200000-cfffffff [ 18.838064] PREFETCH window: e8000000-efffffff [ 18.838089] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 18.839213] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 18.839221] PCI: setting IRQ 11 as level-triggered [ 18.839229] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 18.840329] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 18.840336] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 18.840400] NET: Registered protocol family 2 [ 18.872966] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 18.873148] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 18.873406] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 18.873538] TCP: Hash tables configured (established 16384 bind 8192) [ 18.873545] TCP reno registered [ 18.885126] checking if image is initramfs... it is [ 20.850558] Freeing initrd memory: 7371k freed [ 20.850920] Simple Boot Flag at 0x35 set to 0x1 [ 20.851280] audit: initializing netlink socket (disabled) [ 20.851305] audit(1186620145.440:1): initialized [ 20.851595] VFS: Disk quotas dquot_6.5.1 [ 20.851639] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 20.851745] io scheduler noop registered [ 20.851752] io scheduler anticipatory registered [ 20.851759] io scheduler deadline registered [ 20.851787] io scheduler cfq registered (default) [ 20.852358] isapnp: Scanning for PnP cards... [ 21.206042] isapnp: No Plug & Play device found [ 21.271971] Real Time Clock Driver v1.12ac [ 21.272094] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 21.274846] pnp: Device 00:0a activated. [ 21.275096] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 21.275538] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 21.275557] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 21.275697] mice: PS/2 mouse device common for all mice [ 21.277041] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 21.277559] input: Macintosh mouse button emulation as /class/input/input0 [ 21.277641] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 21.277650] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 21.277984] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 21.284504] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.284515] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 21.284785] EISA: Probing bus 0 at eisa.0 [ 21.284799] Cannot allocate resource for EISA slot 1 [ 21.284807] Cannot allocate resource for EISA slot 2 [ 21.284814] Cannot allocate resource for EISA slot 3 [ 21.284821] Cannot allocate resource for EISA slot 4 [ 21.284827] Cannot allocate resource for EISA slot 5 [ 21.284834] Cannot allocate resource for EISA slot 6 [ 21.284840] Cannot allocate resource for EISA slot 7 [ 21.284847] Cannot allocate resource for EISA slot 8 [ 21.284853] EISA: Detected 0 cards. [ 21.315051] TCP cubic registered [ 21.315070] NET: Registered protocol family 1 [ 21.315120] Using IPI No-Shortcut mode [ 21.315238] ACPI: (supports S0 S3 S4 S5) [ 21.315351] Magic number: 3:368:708 [ 21.315926] Freeing unused kernel memory: 328k freed [ 21.316688] Time: tsc clocksource has been installed. [ 21.317732] input: AT Translated Set 2 keyboard as /class/input/input1 [ 22.898755] md: raid1 personality registered for level 1 [ 22.908787] md: raid0 personality registered for level 0 [ 23.021059] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] [ 23.130146] SCSI subsystem initialized [ 23.157642] libata version 2.20 loaded. [ 23.209428] usbcore: registered new interface driver usbfs [ 23.209510] usbcore: registered new interface driver hub [ 23.209591] usbcore: registered new device driver usb [ 23.215148] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 23.215158] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 23.215184] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 23.215192] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 23.215311] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 23.215371] ehci_hcd 0000:00:1d.7: debug port 1 [ 23.215382] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 23.215400] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 [ 23.219282] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.219569] usb usb1: configuration #1 chosen from 1 choice [ 23.219667] hub 1-0:1.0: USB hub found [ 23.219681] hub 1-0:1.0: 6 ports detected [ 23.332754] USB Universal Host Controller Interface driver v3.0 [ 23.332879] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 23.332902] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 23.332911] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 23.333001] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 23.333037] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 23.333330] usb usb2: configuration #1 chosen from 1 choice [ 23.333426] hub 2-0:1.0: USB hub found [ 23.333441] hub 2-0:1.0: 2 ports detected [ 23.437959] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 23.437967] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 23.437986] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.437995] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.438085] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 23.438116] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 23.438399] usb usb3: configuration #1 chosen from 1 choice [ 23.438494] hub 3-0:1.0: USB hub found [ 23.438509] hub 3-0:1.0: 2 ports detected [ 23.541883] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 23.541891] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 23.541909] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 23.541918] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 23.542007] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 23.542038] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 23.542309] usb usb4: configuration #1 chosen from 1 choice [ 23.542402] hub 4-0:1.0: USB hub found [ 23.542416] hub 4-0:1.0: 2 ports detected [ 23.655954] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.666176] usbcore: registered new interface driver libusual [ 23.680144] Initializing USB Mass Storage driver... [ 23.680222] usbcore: registered new interface driver usb-storage [ 23.680229] USB Mass Storage support registered. [ 23.719108] ata_piix 0000:00:1f.1: version 2.10ac1 [ 23.719133] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 23.719149] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 23.719187] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 23.719279] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 [ 23.719337] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 [ 23.719374] scsi0 : ata_piix [ 23.881043] ata1.00: ata_hpa_resize 1: sectors = 71762930, hpa_sectors = 78140160 [ 23.881055] ata1.00: Host Protected Area detected. [ 23.881059] current size : 71762930 sectors (36742 MB) [ 23.881063] native size : 78140160 sectors (40007 MB) [ 23.888754] ata1.00: Native size increased to 78140160 sectors [ 23.888763] ata1.00: ATA-6: HTS548040M9AT00, MG2OA5BA, max UDMA/100 [ 23.888771] ata1.00: 78140160 sectors, multi 16: LBA [ 23.897042] ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160 [ 23.897050] ata1.00: configured for UDMA/100 [ 23.897062] scsi1 : ata_piix [ 24.216894] ata2.00: ATAPI, max UDMA/33 [ 24.381463] ata2.00: configured for UDMA/33 [ 24.381685] scsi 0:0:0:0: Direct-Access ATA HTS548040M9AT00 MG2O PQ: 0 ANSI: 5 [ 24.381896] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 24.381922] sda: Write Protect is off [ 24.381929] sda: Mode Sense: 00 3a 00 00 [ 24.381964] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.382064] SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) [ 24.382086] sda: Write Protect is off [ 24.382092] sda: Mode Sense: 00 3a 00 00 [ 24.382126] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.382134] sda: sda1 [ 24.406879] sd 0:0:0:0: Attached scsi disk sda [ 24.413716] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8083N 0K03 PQ: 0 ANSI: 5 [ 24.751688] JFS: nTxBlock = 4026, nTxLock = 32208 [ 24.774935] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 24.775282] SGI XFS Quota Management subsystem [ 24.831682] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 24.847786] fuse init (API version 7.8) [ 24.858934] loop: loaded (max 8 devices) [ 24.872912] Registering unionfs 20060916-2203 [ 24.872921] unionfs: debugging is not enabled [ 24.885155] squashfs: version 3.2-UBUNTU (2007/05/16) Phillip Lougher [ 24.943653] Capability LSM initialized [ 25.050784] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 25.050807] ACPI: Processor [CPU] (supports 8 throttling states) [ 25.055961] ACPI: Thermal Zone [THM0] (38 C) [ 26.407397] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 26.407455] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 26.497302] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI [ 26.497311] e100: Copyright(c) 1999-2006 Intel Corporation [ 26.498597] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 26.498606] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 26.523028] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:0D:60:7F:87:3F [ 26.734289] Floppy drive(s): fd0 is 1.44M [ 26.806776] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray [ 26.806788] Uniform CD-ROM driver Revision: 3.20 [ 26.806921] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 26.814504] FDC 0 is a National Semiconductor PC87306 [ 9.332000] Time: acpi_pm clocksource has been installed. [ 9.900000] kjournald starting. Commit interval 5 seconds [ 9.900000] EXT3-fs: mounted filesystem with ordered data mode. [ 10.044000] EXT3 FS on loop0, internal journal [ 13.392000] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 13.568000] usb 3-2: configuration #1 chosen from 1 choice [ 26.160000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 26.184000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 27.004000] Linux agpgart interface v0.102 (c) Dave Jones [ 27.012000] intel_rng: FWH not detected [ 27.056000] iTCO_vendor_support: vendor-support=0 [ 27.060000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 27.060000] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 27.060000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 27.956000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512] [ 27.956000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 27.956000] Yenta: Routing CardBus interrupts to PCI [ 27.956000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64 [ 27.964000] agpgart: Detected an Intel 855PM Chipset. [ 27.980000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 28.188000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 28.188000] Socket status: 30000020 [ 28.188000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 28.188000] cs: IO port probe 0x4000-0x8fff: clean. [ 28.192000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 28.192000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 28.192000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512] [ 28.192000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 28.192000] Yenta: Routing CardBus interrupts to PCI [ 28.192000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64 [ 28.516000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 28.516000] Socket status: 30000006 [ 28.516000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 28.516000] cs: IO port probe 0x4000-0x8fff: clean. [ 28.520000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 28.520000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 28.836000] pccard: CardBus card inserted into slot 0 [ 28.896000] input: PC Speaker as /class/input/input2 [ 28.968000] usbcore: registered new interface driver hiddev [ 29.076000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 [ 29.076000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2 [ 29.076000] usbcore: registered new interface driver usbhid [ 29.076000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 29.436000] parport: PnPBIOS parport detected. [ 29.436000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 29.852000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 29.852000] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 29.892000] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 30.052000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 30.052000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 30.380000] irda_init() [ 30.380000] NET: Registered protocol family 23 [ 30.512000] pnp: Device 00:0c activated. [ 30.512000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 30.512000] nsc-ircc, chip->init [ 30.512000] nsc-ircc, Found chip at base=0x02e [ 30.512000] nsc-ircc, driver loaded (Dag Brattli) [ 30.512000] IrDA: Registered device irda0 [ 30.512000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 30.736000] cs: IO port probe 0x100-0x3af: clean. [ 30.736000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 30.736000] cs: IO port probe 0x820-0x8ff: clean. [ 30.736000] cs: IO port probe 0xc00-0xcf7: clean. [ 30.736000] cs: IO port probe 0xa00-0xaff: clean. [ 30.868000] cs: IO port probe 0x100-0x3af: clean. [ 30.868000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 30.868000] cs: IO port probe 0x820-0x8ff: clean. [ 30.868000] cs: IO port probe 0xc00-0xcf7: clean. [ 30.868000] cs: IO port probe 0xa00-0xaff: clean. [ 30.872000] intel8x0_measure_ac97_clock: measured 55127 usecs [ 30.872000] intel8x0: clocking to 48000 [ 31.148000] lp0: using parport0 (interrupt-driven). [ 31.576000] EXT3 FS on loop0, internal journal [ 32.324000] kjournald starting. Commit interval 5 seconds [ 32.328000] EXT3 FS on loop1, internal journal [ 32.328000] EXT3-fs: mounted filesystem with ordered data mode. [ 35.000000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 35.248000] input: TPPS/2 IBM TrackPoint as /class/input/input5 [ 86.404000] Adding 244132k swap on /media/host/wubi/disks/swap.virtual.disk. Priority:-1 extents:1 across:244132k [ 89.416000] ibm_acpi: ThinkPad EC firmware 1RHT71WW-3.04 [ 89.416000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13 [ 89.416000] ibm_acpi: http://ibm-acpi.sf.net/ [ 89.588000] ACPI: Battery Slot [BAT0] (battery present) [ 89.672000] ACPI: ACPI Dock Station Driver [ 89.720000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 89.744000] ACPI: AC Adapter [AC] (off-line) [ 89.816000] input: Power Button (FF) as /class/input/input6 [ 89.816000] ACPI: Power Button (FF) [PWRF] [ 89.840000] input: Lid Switch as /class/input/input7 [ 89.840000] ACPI: Lid Switch [LID] [ 89.852000] input: Sleep Button (CM) as /class/input/input8 [ 89.852000] ACPI: Sleep Button (CM) [SLPB] [ 89.872000] Using specific hotkey driver [ 90.172000] pcc_acpi: loading... [ 97.760000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 99.796000] ppdev: user-space parallel port driver [ 102.272000] NET: Registered protocol family 17 [ 105.376000] IBM machine detected. Enabling interrupts during APM calls. [ 105.376000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 105.376000] apm: overridden by ACPI. [ 107.148000] Non-volatile memory driver v1.2 [ 107.408000] input: /usr/sbin/thinkpad-keys as /class/input/input9 [ 108.196000] Bluetooth: Core ver 2.11 [ 108.196000] NET: Registered protocol family 31 [ 108.196000] Bluetooth: HCI device and connection manager initialized [ 108.196000] Bluetooth: HCI socket layer initialized [ 108.388000] Bluetooth: L2CAP ver 2.8 [ 108.388000] Bluetooth: L2CAP socket layer initialized [ 108.408000] Bluetooth: RFCOMM socket layer initialized [ 108.408000] Bluetooth: RFCOMM TTY layer initialized [ 108.408000] Bluetooth: RFCOMM ver 1.8 [ 110.228000] NET: Registered protocol family 10 [ 110.232000] lo: Disabled Privacy Extensions [ 111.368000] [drm] Initialized drm 1.1.0 20060810 [ 111.476000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 111.480000] [drm] Initialized radeon 1.25.0 20060524 on minor 0 [ 114.308000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 114.308000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [ 114.308000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [ 114.968000] [drm] Setting GART location based on new memory map [ 114.968000] [drm] writeback test succeeded in 2 usecs [ 120.864000] eth0: no IPv6 routers present 3. Please run the command "sudo lspci -vvnn > lspci-vvnn.log" and attach the resulting file "lspci-vvnn.log" to this bug report. 00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03) Subsystem: IBM Unknown device [1014:0529] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Capabilities: [e4] Vendor Specific Information Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 96 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: c0100000-c01fffff Prefetchable memory behind bridge: e0000000-e7ffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM Thinkpad R50e model 1634 [1014:052d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at 1800 [size=32] 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM Thinkpad R50e model 1634 [1014:052d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 1820 [size=32] 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM Thinkpad R50e model 1634 [1014:052d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 11 Region 4: I/O ports at 1840 [size=32] 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI]) Subsystem: IBM Thinkpad R50e model 1634 [1014:052e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ Capabilities: [58] Debug port 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=02, subordinate=08, sec-latency=64 I/O behind bridge: 00004000-00008fff Memory behind bridge: c0200000-cfffffff Prefetchable memory behind bridge: e8000000-efffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: IBM Thinkpad R50e model 1634 [1014:052d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1860 [size=16] Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01) Subsystem: IBM Thinkpad R50e model 1634 [1014:052d] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 1880 [size=32] 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01) Subsystem: IBM Unknown device [1014:0537] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic]) Subsystem: IBM Unknown device [1014:0524] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] [1002:4c57] (prog-if 00 [VGA]) Subsystem: IBM Unknown device [1014:0530] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at c0120000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1 Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:00.0 CardBus bridge [0607]: Texas Instruments PCI1520 PC card Cardbus Controller [104c:ac55] (rev 01) Subsystem: IBM ThinkPad T30/T40 [1014:0512] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: e8000000-ebfff000 (prefetchable) Memory window 1: c4000000-c7fff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 02:00.1 CardBus bridge [0607]: Texas Instruments PCI1520 PC card Cardbus Controller [104c:ac55] (rev 01) Subsystem: IBM ThinkPad T30/T40 [1014:0512] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 128 bytes Interrupt: pin B routed to IRQ 11 Region 0: Memory at b1000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=07, subordinate=07, sec-latency=176 Memory window 0: ec000000-effff000 (prefetchable) Memory window 1: c8000000-cbfff000 I/O window 0: 00004800-000048ff I/O window 1: 00004c00-00004cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 02:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller [8086:103d] (rev 81) Subsystem: IBM Thinkpad R50e model 1634 [1014:0522] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 8000 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless [11ab:1faa] (rev 03) Subsystem: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless [11ab:1faa] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: Memory at c4000000 (32-bit, non-prefetchable) [disabled] [size=64K] Region 1: Memory at c4010000 (32-bit, non-prefetchable) [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- -- WLAN Card not detected https://bugs.launchpad.net/bugs/130369 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
