** Description changed:
The second and succesive insertions of cards fail, no matter if it's the
same again or a different one. So, I have to reboot the computer in
order to recover the normal automount behaviour.
When I first installed this device it was recognized by the kernel as a
remote controller. To get it working as a multi-card reader I had to
blacklist mceusb driver.
- ~~~~~~~~~~~
+ ~~~~~~~~~~~~~~
Aditional info
- ~~~~~~~~~~~
+ ~~~~~~~~~~~~~~
Ubuntu version:
12.04.3
+
Kernel:
Linux 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64
x86_64 x86_64 GNU/Linux
+
Card reader (commercial name):
CoolBox CR-600
- Controller (not sure if it's this one):
- Bus 002 Device 003: ID 058f:6391 Alcor Micro Corp.
+
+ lsusb:
+ Bus 001 Device 003: ID 0bda:0161 Realtek Semiconductor Corp. Mass Storage
Device
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
- idVendor 0x058f Alcor Micro Corp.
- idProduct 0x6391
- bcdDevice 1.00
+ idVendor 0x0bda Realtek Semiconductor Corp.
+ idProduct 0x0161 Mass Storage Device
+ bcdDevice 61.10
iManufacturer 1
iProduct 2
- iSerial 0
+ iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
- wTotalLength 32
- bNumInterfaces 1
+ wTotalLength 116
+ bNumInterfaces 2
bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xc0
- Self Powered
- MaxPower 100mA
+ iConfiguration 4
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
+ bNumEndpoints 3
+ bInterfaceClass 11 Chip/SmartCard
+ bInterfaceSubClass 0
+ bInterfaceProtocol 0
+ iInterface 6
+ ChipCard Interface Descriptor:
+ bLength 54
+ bDescriptorType 33
+ bcdCCID 1.10 (Warning: Only accurate for version 1.0)
+ nMaxSlotIndex 0
+ bVoltageSupport 7 5.0V 3.0V 1.8V
+ dwProtocols 3 T=0 T=1
+ dwDefaultClock 3750
+ dwMaxiumumClock 7500
+ bNumClockSupported 0
+ dwDataRate 10080 bps
+ dwMaxDataRate 312500 bps
+ bNumDataRatesSupp. 0
+ dwMaxIFSD 254
+ dwSyncProtocols 00000000
+ dwMechanical 00000000
+ dwFeatures 00010030
+ Auto clock change
+ Auto baud rate change
+ TPDU level exchange
+ dwMaxCCIDMsgLen 271
+ bClassGetResponse 00
+ bClassEnvelope 00
+ wlcdLayout none
+ bPINSupport 0
+ bMaxCCIDBusySlots 1
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 EP 3 IN
+ bmAttributes 3
+ Transfer Type Interrupt
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0040 1x 64 bytes
+ bInterval 8
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x05 EP 5 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x86 EP 6 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 1
+ bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
- iInterface 0
+ iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
+
+
+ usb-devices (after boot):
+ T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
+ D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+ P: Vendor=0bda ProdID=0161 Rev=61.10
+ S: Manufacturer=Generic
+ S: Product=USB2.0-CRW
+ S: SerialNumber=20070818000000000
+ C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
+ I: If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
+ I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
+
+
+ usb-devices (after card insertion/extraction):
+ T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
+ D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
+ P: Vendor=0bda ProdID=0161 Rev=61.10
+ S: Manufacturer=Generic
+ S: Product=USB2.0-CRW
+ S: SerialNumber=20070818000000000
+ C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
+ I: If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=(none)
+ I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
+
+
+ modinfo usb_storage:
+ filename:
/lib/modules/3.2.0-55-generic/kernel/drivers/usb/storage/usb-storage.ko
+ license: GPL
+ description: USB Mass Storage driver for Linux
+ author: Matthew Dharm <[email protected]>
+ srcversion: 10B205CD8F63479C5C1FB0D
+ depends:
+ intree: Y
+ vermagic: 3.2.0-55-generic SMP mod_unload modversions
+ parm: option_zero_cd:ZeroCD mode (1=Force Modem (default), 2=Allow
CD-Rom (uint)
+ parm: swi_tru_install:TRU-Install mode (1=Full Logic (def), 2=Force
CD-Rom, 3=Force Modem) (uint)
+ parm: delay_use:seconds to delay before using a new device (uint)
+ parm: quirks:supplemental list of device IDs and their quirks
(string)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1249134
Title:
CoolBox CR-600 usb card reader fails with second and succesive card
insertions
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1249134/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
