for Codec: IDT 92HD71B7X
the situation is almost the same three output pin complexes share two audio
output volume controls
you can enable "loopback mixing" so that the driver use the analog mixer
node 0x17
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Control: name="Headphone Jack", index=0, device=0
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x0421101f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Connection: 3
0x10 0x11* 0x17
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Control: name="Speaker Phantom Jack", index=0, device=0
Pincap 0x00000014: OUT Detect
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 3
0x10* 0x11 0x17
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Control: name="Dock Line Out Jack", index=0, device=0
Pincap 0x00000014: OUT Detect
Pin Default 0x23011050: [Jack] Line Out at Sep Left
Conn = 1/8, Color = Black
DefAssociation = 0x5, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=02, enabled=1
Connection: 3
0x10* 0x11 0x17
Node 0x10 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="PCM Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="PCM Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="92HD71B7X Analog", type="Audio", device=0
Amp-Out caps: N/A
Amp-Out vals: [0x6d 0x6d]
Converter: stream=8, channel=0
Power states:
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x11 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: N/A
Amp-Out vals: [0x6d 0x6d]
Converter: stream=8, channel=0
Power states:
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Dock Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Dock Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80]
Connection: 5
0x10 0x11 0x27 0x1a 0x1b
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1254884
Title:
Pulseaudio: incoherent muting of GStreamer channels (mutes master,
headphone and speaker, but unmutes only master)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1254884/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
