Laptop is HP Probook 4540s with Seagate 750GB HDD.
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus SpinPoint M8 (AF)
Device Model: ST750LM022 HN-M750MBB
Serial Number: S2SUJ9KC909317
LU WWN Device Id: 5 0004cf 2085c649e
Firmware Version: 2AR10002
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue May 6 13:53:33 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9780) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always
- 13
2 Throughput_Performance 0x0027 252 252 000 Pre-fail Always
- 0
3 Spin_Up_Time 0x0023 089 089 025 Pre-fail Always
- 3456
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always
- 1233
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002f 252 252 051 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0025 252 252 015 Pre-fail Offline
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 4116
10 Spin_Retry_Count 0x0033 252 252 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always
- 409
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always
- 1204
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always
- 9806512
183 Runtime_Bad_Block 0x0032 252 252 010 Old_age Always
- 0
184 End-to-End_Error 0x0033 252 252 048 Pre-fail Always
- 0
186 Unknown_Attribute 0x0032 252 252 000 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 252 252 000 Old_age Always
- 0
188 Command_Timeout 0x0032 252 252 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0002 074 056 040 Old_age Always
- 26 (Min/Max 15/45)
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always
- 63
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always
- 0
193 Load_Cycle_Count 0x0032 091 091 000 Old_age Always
- 92145
194 Temperature_Celsius 0x0002 064 056 000 Old_age Always
- 26 (Min/Max 15/45)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always
- 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always
- 7281
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 4110 -
# 2 Short offline Completed without error 00% 4108 -
# 3 Short offline Completed without error 00% 4104 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been
run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
///////////////////////////////////////////////////////////////////////////////////////////////////////////
Last night I noticed that cycles are now getting higher even with AC.
On Windows this is not happening on the AC or battery.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1316284
Title:
Load/Unload Cycle Count
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1316284/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
