Launchpad has imported 13 comments from the remote bug at https://bugzilla.novell.com/show_bug.cgi?id=864866.
If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. ------------------------------------------------------------------------ On 2014-02-20T12:17:53+00:00 Joschibrauchle wrote: User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/32.0.1700.107 Safari/537.36 Hi, I have an external USB3 harddrive attached to an USB3 port on my desktop PC running openSUSE 13.1. At random times, sometimes multiple times a minute, the USB3 device gets disconnected. It does not matter if the device is mounted (in use) or not. Please see dmesg output: ---------------------------- [870461.269481] usb 4-3: new SuperSpeed USB device number 28 using xhci_hcd [870461.281358] usb 4-3: New USB device found, idVendor=174c, idProduct=55aa [870461.281372] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [870461.281374] usb 4-3: Product: USB 3.0 Device [870461.281376] usb 4-3: Manufacturer: Intenso [870461.281378] usb 4-3: SerialNumber: 31800000000000003E38 [870461.282007] usb-storage 4-3:1.0: USB Mass Storage device detected [870461.282089] usb-storage 4-3:1.0: Quirks match for vid 174c pid 55aa: 400000 [870461.282167] scsi36 : usb-storage 4-3:1.0 [870462.284210] scsi 36:0:0:0: Direct-Access Intenso USB 3.0 Device 0 PQ: 0 ANSI: 6 [870462.284401] sd 36:0:0:0: Attached scsi generic sg6 type 0 [870464.199577] sd 36:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [870464.199581] sd 36:0:0:0: [sdf] 4096-byte physical blocks [870464.199874] sd 36:0:0:0: [sdf] Write Protect is off [870464.199877] sd 36:0:0:0: [sdf] Mode Sense: 43 00 00 00 [870464.200155] sd 36:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [870464.221691] sdf: sdf1 sdf2 sdf3 [870464.222938] sd 36:0:0:0: [sdf] Attached SCSI disk [870549.477048] usb 4-3: USB disconnect, device number 28 [870549.538986] sd 36:0:0:0: [sdf] Synchronizing SCSI cache [870549.539025] sd 36:0:0:0: [sdf] [870549.539028] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [870549.539211] usb 4-3: Set SEL for device-initiated U1 failed. [870549.539214] usb 4-3: Set SEL for device-initiated U2 failed. [870549.745153] usb 4-3: new SuperSpeed USB device number 29 using xhci_hcd [870549.756736] usb 4-3: New USB device found, idVendor=174c, idProduct=55aa [870549.756743] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [870549.756746] usb 4-3: Product: USB 3.0 Device [870549.756748] usb 4-3: Manufacturer: Intenso [870549.756751] usb 4-3: SerialNumber: 31800000000000003E38 [870549.757361] usb-storage 4-3:1.0: USB Mass Storage device detected [870549.757408] usb-storage 4-3:1.0: Quirks match for vid 174c pid 55aa: 400000 [870549.757443] scsi37 : usb-storage 4-3:1.0 [870550.758808] scsi 37:0:0:0: Direct-Access Intenso USB 3.0 Device 0 PQ: 0 ANSI: 6 [870550.758971] sd 37:0:0:0: Attached scsi generic sg6 type 0 [870550.759173] sd 37:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [870550.759175] sd 37:0:0:0: [sdf] 4096-byte physical blocks [870550.759432] sd 37:0:0:0: [sdf] Write Protect is off [870550.759434] sd 37:0:0:0: [sdf] Mode Sense: 43 00 00 00 [870550.760176] sd 37:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [870550.798929] sdf: sdf1 sdf2 sdf3 [870550.799953] sd 37:0:0:0: [sdf] Attached SCSI disk [870566.253742] usb 4-3: USB disconnect, device number 29 [870566.254760] sd 37:0:0:0: [sdf] Synchronizing SCSI cache [870566.254792] sd 37:0:0:0: [sdf] [870566.254795] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [870566.254990] usb 4-3: Set SEL for device-initiated U1 failed. [870566.254994] usb 4-3: Set SEL for device-initiated U2 failed. [870566.460920] usb 4-3: new SuperSpeed USB device number 30 using xhci_hcd ... ---------------------------- Reproducible: Sometimes Steps to Reproduce: 1. Attach USB3 disk to USB3 port Actual Results: Device gets disconnected randomly (sometimes even during use) Expected Results: Device should stay connected while plugged in Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/10 ------------------------------------------------------------------------ On 2014-03-13T09:23:43+00:00 Tiwai-r wrote: Oliver, another git for you. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/11 ------------------------------------------------------------------------ On 2014-03-13T09:40:32+00:00 Oneukum wrote: Looks like you might need 140e3026a57ab7d830dab2f2c57796c222db0ea9 This issue affects only some HCDs. Please provide the output of "lspci -vvvk" Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/12 ------------------------------------------------------------------------ On 2014-03-13T09:55:52+00:00 Graymark wrote: I added my address to the CC: list because something similar happens to me. I have two 4GB seagate USB3 "desktop expansion drives" which change device (say from sdc to sdd) if they are being written to _very_ slowly (an image copy of my mostly zeroed Win8 partition compressed by xz for instance). Otherwise they behave perfectly well - never as much as a burp. My approach to my problem is "don't do that then" so I have not bothered to report the bug (and like I said my bug is only _slightly_ similar -- apart from complaining that the drive it was writing to has "disappeared" the kernel does not log any other errors.) My drives never "disconnect" when not not being used, or when read or written to at "normal" (very fast!) speeds. (Just my 2 cents worth -- I didn't want to distract attention from this rather different bug by mentioning this before.) Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/13 ------------------------------------------------------------------------ On 2014-03-13T10:58:23+00:00 Joschibrauchle wrote: Created an attachment (id=581976) Output of 'lspci -vvvk' Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/14 ------------------------------------------------------------------------ On 2014-03-13T15:34:59+00:00 Oneukum wrote: Please try the test kernel at https://build.opensuse.org/project/monitor?project=home%3Aoneukum%3Abnc864866a Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/15 ------------------------------------------------------------------------ On 2014-03-13T15:36:06+00:00 Oneukum wrote: (In reply to comment #4) > Created an attachment (id=581976) [details] > Output of 'lspci -vvvk' This is not the affected HCD. So it may be: http://comments.gmane.org/gmane.linux.usb.general/101512 The test kernel includes the proposed, untested patch. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/16 ------------------------------------------------------------------------ On 2014-03-14T12:45:35+00:00 Joschibrauchle wrote: Unfortunately the test kernel does not fix the bug, see: ---------------------- [ 89.544267] usb 4-3: USB disconnect, device number 2 [ 89.544898] sd 6:0:0:0: [sdb] Synchronizing SCSI cache [ 89.544956] sd 6:0:0:0: [sdb] [ 89.544958] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 89.545052] usb 4-3: Set SEL for device-initiated U1 failed. [ 89.545053] usb 4-3: Set SEL for device-initiated U2 failed. [ 92.965861] usb 4-3: new SuperSpeed USB device number 3 using xhci_hcd [ 92.977711] usb 4-3: New USB device found, idVendor=174c, idProduct=55aa [ 92.977716] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 92.977729] usb 4-3: Product: USB 3.0 Device [ 92.977731] usb 4-3: Manufacturer: Intenso [ 92.977733] usb 4-3: SerialNumber: 31800000000000003E38 [ 92.978349] usb-storage 4-3:1.0: USB Mass Storage device detected [ 92.978435] usb-storage 4-3:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 92.978481] scsi9 : usb-storage 4-3:1.0 [ 93.981618] scsi 9:0:0:0: Direct-Access Intenso USB 3.0 Device 0 PQ: 0 ANSI: 6 [ 93.981793] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 95.233545] sd 9:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 95.233548] sd 9:0:0:0: [sdb] 4096-byte physical blocks [ 95.233853] sd 9:0:0:0: [sdb] Write Protect is off [ 95.233857] sd 9:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 95.234134] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 95.247774] sdb: sdb1 sdb2 sdb3 [ 95.249078] sd 9:0:0:0: [sdb] Attached SCSI disk [ 295.886411] usb 4-3: USB disconnect, device number 3 [ 295.886939] sd 9:0:0:0: [sdb] Synchronizing SCSI cache [ 295.887031] sd 9:0:0:0: [sdb] [ 295.887034] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 295.887138] usb 4-3: Set SEL for device-initiated U1 failed. [ 295.887140] usb 4-3: Set SEL for device-initiated U2 failed. [ 296.092510] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 296.103979] usb 4-3: New USB device found, idVendor=174c, idProduct=55aa [ 296.103981] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 296.103983] usb 4-3: Product: USB 3.0 Device [ 296.103984] usb 4-3: Manufacturer: Intenso [ 296.103986] usb 4-3: SerialNumber: 31800000000000003E38 [ 296.104600] usb-storage 4-3:1.0: USB Mass Storage device detected [ 296.104652] usb-storage 4-3:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 296.104680] scsi10 : usb-storage 4-3:1.0 [ 297.107297] scsi 10:0:0:0: Direct-Access Intenso USB 3.0 Device 0 PQ: 0 ANSI: 6 [ 297.107654] sd 10:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 297.107656] sd 10:0:0:0: [sdb] 4096-byte physical blocks [ 297.107786] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 297.107917] sd 10:0:0:0: [sdb] Write Protect is off [ 297.107928] sd 10:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 297.108172] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 297.109296] sdb: sdb1 sdb2 sdb3 [ 297.110307] sd 10:0:0:0: [sdb] Attached SCSI disk st-brauchle:/home/brauchle # uname -a Linux st-brauchle 3.11.10-1.g17fc0f0-desktop #1 SMP PREEMPT Thu Mar 13 09:14:49 UTC 2014 (17fc0f0) x86_64 x86_64 x86_64 GNU/Linux ---------------------- Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/17 ------------------------------------------------------------------------ On 2014-03-15T08:59:16+00:00 Oneukum wrote: Please provide the log from the moment of first plug in onwards Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/18 ------------------------------------------------------------------------ On 2014-03-15T11:55:19+00:00 Joschibrauchle wrote: Which log do you mean exactly? dmesg output? Is there anything I can do to provide a more verbose log? Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/19 ------------------------------------------------------------------------ On 2014-03-15T14:06:43+00:00 Joschibrauchle wrote: This is dmesg from the initial plug in: [ 110.249771] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd [ 110.261313] usb 4-4: New USB device found, idVendor=174c, idProduct=55aa [ 110.261318] usb 4-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 110.261322] usb 4-4: Product: USB 3.0 Device [ 110.261325] usb 4-4: Manufacturer: Intenso [ 110.261328] usb 4-4: SerialNumber: 31800000000000003E38 [ 110.261980] usb-storage 4-4:1.0: USB Mass Storage device detected [ 110.262020] usb-storage 4-4:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 110.262039] scsi8 : usb-storage 4-4:1.0 [ 111.264363] scsi 8:0:0:0: Direct-Access Intenso USB 3.0 Device 0 PQ: 0 ANSI: 6 [ 111.264513] sd 8:0:0:0: Attached scsi generic sg7 type 0 [ 113.180356] sd 8:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 113.180359] sd 8:0:0:0: [sdg] 4096-byte physical blocks [ 113.180661] sd 8:0:0:0: [sdg] Write Protect is off [ 113.180664] sd 8:0:0:0: [sdg] Mode Sense: 43 00 00 00 [ 113.180910] sd 8:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 113.201961] sdg: sdg1 sdg2 sdg3 [ 113.202944] sd 8:0:0:0: [sdg] Attached SCSI disk Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/20 ------------------------------------------------------------------------ On 2014-03-15T14:12:13+00:00 Joschibrauchle wrote: This from the first actual unplug event: [ 469.850589] usb 4-4: USB disconnect, device number 2 [ 469.851354] sd 8:0:0:0: [sdg] Synchronizing SCSI cache [ 469.851511] sd 8:0:0:0: [sdg] [ 469.851514] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 469.852256] usb 4-4: Set SEL for device-initiated U1 failed. [ 469.852259] usb 4-4: Set SEL for device-initiated U2 failed. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/21 ------------------------------------------------------------------------ On 2014-04-23T13:14:30+00:00 Joschibrauchle wrote: Is there any update on this problem? It keeps happening randomly for me, and makes working with the USB device somewhat cumbersome. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/comments/22 ** Changed in: linux (Suse) Status: Unknown => Confirmed ** Changed in: linux (Suse) Importance: Unknown => Medium -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1271268 Title: 174c:5106 1 TB External USB 3.0 Drive Fails to Automount through USB 3.0 dock with XHCI Enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
