Public bug reported:

Boot with acpi=off and sound works.

Tried modifying DSDT.aml as per this link and still does not work:
http://www.linuxforums.org/forum/peripherals-hardware/96259-toshiba-p100
-series-sound-fix-ubuntu.html

Have Gutsy Gibbon
Kernel: 2.6.22.10.11


[EMAIL PROTECTED]:~# tail /proc/asound/oss/sndstatp
tail: cannot open `/proc/asound/oss/sndstatp' for reading: No such file or 
directory
[EMAIL PROTECTED]:~# clear
[EMAIL PROTECTED]:~# tail /proc/asound/oss/sndstat 

Synth devices: NOT ENABLED IN CONFIG

Midi devices: NOT ENABLED IN CONFIG

Timers:
31: system timer

Mixers:
0: Conexant CX20551 (Waikiki)
[EMAIL PROTECTED]:~# amixer
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 30
  Mono:
  Front Left: Playback 24 [80%] [on]
  Front Right: Playback 24 [80%] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB] [on]
  Front Right: Playback 255 [100%] [0.00dB] [on]
Simple mixer control 'Line-In',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [off]
Simple mixer control 'Mic Bypass',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 30
  Front Left: Capture 0 [0%] [-34.50dB] [off]
  Front Right: Capture 0 [0%] [-34.50dB] [off]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 14
  Front Left: Capture 0 [0%] [0.00dB] [off]
  Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Digital',0
  Capabilities: cvolume
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 120
  Front Left: Capture 60 [50%] [0.00dB]
  Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'ExtMic',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [on]
[EMAIL PROTECTED]:~# lspci -nv
00:00.0 0600: 8086:27a0 (rev 03)
        Subsystem: 1179:ff31
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: d0000000-d1ffffff
        Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
        Capabilities: [88] Subsystem: 1179:ff31
        Capabilities: [80] Power Management version 2
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+
        Capabilities: [a0] Express Root Port (Slot+) IRQ 0

00:1b.0 0403: 8086:27d8 (rev 02)
        Subsystem: 1179:ff31
        Flags: bus master, fast devsel, latency 0, IRQ 21
        Memory at d2500000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
        Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: 8c000000-8c0fffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+
        Capabilities: [90] Subsystem: 1179:ff31
        Capabilities: [a0] Power Management version 2

00:1c.1 0604: 8086:27d2 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: 8c100000-8c1fffff
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+
        Capabilities: [90] Subsystem: 1179:ff31
        Capabilities: [a0] Power Management version 2

00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable+
        Capabilities: [90] Subsystem: 1179:ff31
        Capabilities: [a0] Power Management version 2

00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 1800 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at 1820 [size=32]

00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at 1840 [size=32]

00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at 1860 [size=32]

00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0, IRQ 19
        Memory at d2504000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port

00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=32
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: d2100000-d21fffff
        Prefetchable memory behind bridge: 0000000088000000-000000008bffffff
        Capabilities: [50] Subsystem: 1179:ff31

00:1f.0 0601: 8086:27b9 (rev 02)
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information

00:1f.2 0101: 8086:27c4 (rev 02) (prog-if 80 [Master])
        Subsystem: 1179:ff31
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at 18b0 [size=16]
        Capabilities: [70] Power Management version 2

00:1f.3 0c05: 8086:27da (rev 02)
        Subsystem: 1179:ff31
        Flags: medium devsel, IRQ 11
        I/O ports at 18c0 [size=32]

01:00.0 0300: 10de:01d7 (rev a1) (prog-if 00 [VGA])
        Subsystem: 1179:ff31
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
        Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Memory at d0000000 (64-bit, non-prefetchable) [size=16M]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
        Capabilities: [78] Express Endpoint IRQ 0

02:00.0 0200: 8086:109a
        Subsystem: 1179:ff31
        Flags: bus master, fast devsel, latency 0, IRQ 219
        Memory at 8c000000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at 2000 [size=32]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable+
        Capabilities: [e0] Express Endpoint IRQ 0

03:00.0 0280: 8086:4222 (rev 02)
        Subsystem: 8086:1040
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at 8c100000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
        Capabilities: [e0] Express Legacy Endpoint IRQ 0

0a:04.0 0607: 104c:8039
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 168, IRQ 17
        Memory at d2100000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
        Memory window 0: 88000000-8bfff000 (prefetchable)
        Memory window 1: 90000000-93fff000
        I/O window 0: 00003000-000030ff
        I/O window 1: 00003400-000034ff
        16-bit legacy interface ports at 0001

0a:04.1 0c00: 104c:803a (prog-if 10 [OHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at d2102000 (32-bit, non-prefetchable) [size=2K]
        Memory at d2104000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2

0a:04.2 0180: 104c:803b
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at d2101000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

0a:04.3 0805: 104c:803c (prog-if 01)
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 64, IRQ 17
        Memory at d2102800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2

[EMAIL PROTECTED]:~# asoundconf list
Names of available sound cards:
Intel
[EMAIL PROTECTED]:~# dmesg
[    0.000000] Linux version 2.6.22-10-386 ([EMAIL PROTECTED]) (gcc version 
4.1.3 20070812 (prerelease) (Ubuntu 4.1.2-15ubuntu2)) #1 Wed Aug 22 07:43:24 
GMT 2007 (Ubuntu 2.6.22-10.30-386)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
[    0.000000]  BIOS-e820: 000000007fe90000 - 000000007fe9c000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007fe9c000 - 000000007ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 1150MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7690
[    0.000000] Entering add_active_range(0, 0, 523920) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   523920
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   523920
[    0.000000] On node 0 totalpages: 523920
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2301 pages used for memmap
[    0.000000]   HighMem zone: 292243 pages, LIFO batch:31
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F75D0, 0024 (r2 TOSQCI)
[    0.000000] ACPI: XSDT 7FE91FB4, 0074 (r1 TOSQCI TOSQCI00  6040000  LTP      
  0)
[    0.000000] ACPI: FACP 7FE9BC2A, 00F4 (r3 TOSQCI TOSQCI00  6040000 ALAN      
  1)
[    0.000000] ACPI: DSDT 7FE9305C, 8B5A (r1 TOSQCI   Denver  6040000 MSFT  
3000001)
[    0.000000] ACPI: FACS 7FE9CFC0, 0040
[    0.000000] ACPI: APIC 7FE9BD1E, 0068 (r1 TOSQCI TOSQCI00  6040000 LOHR      
 5A)
[    0.000000] ACPI: HPET 7FE9BD86, 0038 (r1 TOSQCI TOSQCI00  6040000 LOHR      
 5A)
[    0.000000] ACPI: MCFG 7FE9BDBE, 003C (r1 TOSQCI TOSQCI00  6040000 LOHR      
 5A)
[    0.000000] ACPI: APIC 7FE9BDFA, 0068 (r1 PTLTD       APIC    6040000  LTP   
     0)
[    0.000000] ACPI: BOOT 7FE9BE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP      
  1)
[    0.000000] ACPI: SLIC 7FE9BE8A, 0176 (r1 TOSQCI TOSQCI00  6040000  LTP      
  0)
[    0.000000] ACPI: SSDT 7FE925B4, 025F (r1  PmRef  Cpu0Tst     3000 INTL 
20060912)
[    0.000000] ACPI: SSDT 7FE9250E, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 
20060912)
[    0.000000] ACPI: SSDT 7FE92028, 04E6 (r1  PmRef    CpuPm     3000 INTL 
20060912)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [EMAIL 
PROTECTED]
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:14 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:14 APIC version 20
[    0.000000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 
80000000:60000000)
[    0.000000] Built 1 zonelists.  Total pages: 519827
[    0.000000] Kernel command line: 
root=UUID=feabbedf-85ad-4e36-be39-3e00fec57275 ro quiet splash 
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2006.706 MHz processor.
[   27.818330] Console: colour VGA+ 80x25
[   27.818564] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   27.818877] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   27.883010] Memory: 2066620k/2095680k available (1924k kernel code, 27856k 
reserved, 873k data, 348k init, 1178176k highmem)
[   27.883019] virtual kernel memory layout:
[   27.883020]     fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
[   27.883021]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   27.883022]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   27.883023]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   27.883025]       .init : 0xc03be000 - 0xc0415000   ( 348 kB)
[   27.883026]       .data : 0xc02e1235 - 0xc03bb9e4   ( 873 kB)
[   27.883027]       .text : 0xc0100000 - 0xc02e1235   (1924 kB)
[   27.883030] Checking if this processor honours the WP bit even in supervisor 
mode... Ok.
[   27.883068] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, 
Nodes=1
[   27.883195] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   27.883199] hpet0: 3 64-bit timers, 14318180 Hz
[   27.964167] Calibrating delay using timer specific routine.. 4017.36 
BogoMIPS (lpj=8034739)
[   27.964186] Security Framework v1.0.0 initialized
[   27.964193] SELinux:  Disabled at boot.
[   27.964198] Mount-cache hash table entries: 512
[   27.964281] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 
00000000 0000c1a9 00000000 00000000
[   27.964287] monitor/mwait feature present.
[   27.964289] using mwait in idle threads.
[   27.964292] CPU: L1 I cache: 32K, L1 D cache: 32K
[   27.964294] CPU: L2 cache: 2048K
[   27.964296] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 
0000c1a9 00000000 00000000
[   27.964303] Compat vDSO mapped to ffffe000.
[   27.964312] CPU: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz 
stepping 08
[   27.964317] Checking 'hlt' instruction... OK.
[   27.980582] Early unpacking initramfs... done
[   28.267523] ACPI: Core revision 20070126
[   28.267528] Toshiba Satellite P100 detected: requires not _OSI(Linux)
[   28.267530] ACPI: Disabled _OSI(Linux)
[   28.267594] ACPI: Looking for DSDT in initramfs... successfully read 32131 
bytes from /DSDT.aml.
[   28.267619] ACPI: Table DSDT replaced by host OS
[   28.267622] ACPI: DSDT 00000000, 7D83 (r1 TOSQCI   Denver  6040000 INTL 
20061109)
[   28.284122] ENABLING IO-APIC IRQs
[   28.284313] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   28.431926] Booting paravirtualized kernel on bare hardware
[   28.432005] Time: 14:55:27  Date: 07/31/107
[   28.432020] NET: Registered protocol family 16
[   28.432080] EISA bus registered
[   28.432084] ACPI: bus type pci registered
[   28.457101] PCI: PCI BIOS revision 2.10 entry at 0xfd704, last bus=11
[   28.457103] PCI: Using configuration type 1
[   28.457105] Setting up standard PCI resources
[   28.459618] ACPI: EC: Look up EC in DSDT
[   28.460204] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[   28.532977] ACPI: Interpreter enabled
[   28.532979] ACPI: (supports S0 S3 S4 S5)
[   28.532991] ACPI: Using IOAPIC for interrupt routing
[   28.543283] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[   28.581448] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   28.581512] PCI: Probing PCI hardware (bus 00)
[   28.584046] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   28.584050] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[   28.585258] PCI: Transparent bridge - 0000:00:1e.0
[   28.585317] PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a 
(-#0b) (try 'pci=assign-busses')
[   28.585320] Please report the result to linux-kernel to fix this permanently
[   28.585386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   28.585654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[   28.585774] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   28.585893] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[   28.586010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[   28.586140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   28.593455] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) 
*11
[   28.593547] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   28.593643] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) 
*11
[   28.593732] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   28.593822] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) 
*0, disabled.
[   28.593912] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) 
*0, disabled.
[   28.594002] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) 
*11
[   28.594092] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[   28.594178] Linux Plug and Play Support v0.97 (c) Adam Belay
[   28.594187] pnp: PnP ACPI init
[   28.594192] ACPI: bus type pnp registered
[   28.596099] pnp: PnP ACPI: found 9 devices
[   28.596101] ACPI: ACPI bus type pnp unregistered
[   28.596103] PnPBIOS: Disabled by ACPI PNP
[   28.596134] PCI: Using ACPI for IRQ routing
[   28.596136] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, 
post a report
[   28.596140] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[   28.596233] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[   28.596319] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[   28.596403] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[   28.596489] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[   28.596576] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[   28.596660] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[   28.596745] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[   28.596831] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[   28.626109] NET: Registered protocol family 8
[   28.626111] NET: Registered protocol family 20
[   28.626146] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be 
reserved
[   28.626149] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be 
reserved
[   28.626152] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be 
reserved
[   28.626155] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be 
reserved
[   28.626159] pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be 
reserved
[   28.627750] Time: tsc clocksource has been installed.
[   28.627763] Switched to high resolution mode on CPU 0
[   28.656373] PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 
0000:01:00.0
[   28.656460] PCI: Bridge: 0000:00:01.0
[   28.656461]   IO window: disabled.
[   28.656464]   MEM window: d0000000-d1ffffff
[   28.656467]   PREFETCH window: c0000000-cfffffff
[   28.656481] PCI: Bridge: 0000:00:1c.0
[   28.656484]   IO window: 2000-2fff
[   28.656490]   MEM window: 8c000000-8c0fffff
[   28.656493]   PREFETCH window: disabled.
[   28.656509] PCI: Bridge: 0000:00:1c.1
[   28.656510]   IO window: disabled.
[   28.656515]   MEM window: 8c100000-8c1fffff
[   28.656519]   PREFETCH window: disabled.
[   28.656524] PCI: Bridge: 0000:00:1c.2
[   28.656525]   IO window: disabled.
[   28.656530]   MEM window: disabled.
[   28.656534]   PREFETCH window: disabled.
[   28.656541] PCI: Bus 11, cardbus bridge: 0000:0a:04.0
[   28.656543]   IO window: 00003000-000030ff
[   28.656547]   IO window: 00003400-000034ff
[   28.656552]   PREFETCH window: 88000000-8bffffff
[   28.656557]   MEM window: 90000000-93ffffff
[   28.656562] PCI: Bridge: 0000:00:1e.0
[   28.656565]   IO window: 3000-3fff
[   28.656570]   MEM window: d2100000-d21fffff
[   28.656574]   PREFETCH window: 88000000-8bffffff
[   28.656588] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[   28.656592] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   28.656612] PCI: Enabling device 0000:00:1c.0 (0000 -> 0003)
[   28.656616] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> 
IRQ 17
[   28.656622] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   28.656642] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
[   28.656645] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> 
IRQ 16
[   28.656651] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   28.656672] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> 
IRQ 18
[   28.656678] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   28.656688] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
[   28.656693] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   28.656709] PCI: Enabling device 0000:0a:04.0 (0000 -> 0003)
[   28.656712] ACPI: PCI Interrupt 0000:0a:04.0[A] -> GSI 17 (level, low) -> 
IRQ 17
[   28.656719] PCI: Setting latency timer of device 0000:0a:04.0 to 64
[   28.656729] NET: Registered protocol family 2
[   28.695693] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   28.695744] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[   28.696357] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[   28.696528] TCP: Hash tables configured (established 131072 bind 65536)
[   28.696530] TCP reno registered
[   28.707774] checking if image is initramfs... it is
[   29.273434] Freeing initrd memory: 7100k freed
[   29.273530] Simple Boot Flag at 0x36 set to 0x1
[   29.273776] audit: initializing netlink socket (disabled)
[   29.273787] audit(1188572128.268:1): initialized
[   29.273834] highmem bounce pool size: 64 pages
[   29.275139] VFS: Disk quotas dquot_6.5.1
[   29.275148] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   29.275221] io scheduler noop registered
[   29.275222] io scheduler anticipatory registered
[   29.275224] io scheduler deadline registered
[   29.275236] io scheduler cfq registered (default)
[   37.270332] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[   37.270450] Boot video device is 0000:01:00.0
[   37.270519] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   37.270547] assign_interrupt_mode Found MSI capability
[   37.270572] Allocate Port Service[0000:00:01.0:pcie00]
[   37.270631] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   37.270682] assign_interrupt_mode Found MSI capability
[   37.270722] Allocate Port Service[0000:00:1c.0:pcie00]
[   37.270742] Allocate Port Service[0000:00:1c.0:pcie02]
[   37.270822] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   37.270873] assign_interrupt_mode Found MSI capability
[   37.270913] Allocate Port Service[0000:00:1c.1:pcie00]
[   37.270933] Allocate Port Service[0000:00:1c.1:pcie02]
[   37.271015] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[   37.271065] assign_interrupt_mode Found MSI capability
[   37.271105] Allocate Port Service[0000:00:1c.2:pcie00]
[   37.271126] Allocate Port Service[0000:00:1c.2:pcie02]
[   37.271268] isapnp: Scanning for PnP cards...
[   37.625902] isapnp: No Plug & Play device found
[   37.641839] hpet_resources: 0xfed00000 is busy
[   37.641862] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing 
enabled
[   37.642614] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 
blocksize
[   37.642761] input: Macintosh mouse button emulation as /class/input/input0
[   37.642813] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 
irq 1,12
[   37.646216] serio: i8042 KBD port at 0x60,0x64 irq 1
[   37.646220] serio: i8042 AUX port at 0x60,0x64 irq 12
[   37.646323] mice: PS/2 mouse device common for all mice
[   37.646393] EISA: Probing bus 0 at eisa.0
[   37.646399] Cannot allocate resource for EISA slot 1
[   37.646401] Cannot allocate resource for EISA slot 2
[   37.646403] Cannot allocate resource for EISA slot 3
[   37.646423] EISA: Detected 0 cards.
[   37.646496] TCP cubic registered
[   37.646508] NET: Registered protocol family 1
[   37.646526] Using IPI Shortcut mode
[   37.646647]   Magic number: 3:717:941
[   37.646709]   hash matches device ptyyc
[   37.646916] Freeing unused kernel memory: 348k freed
[   37.682176] input: AT Translated Set 2 keyboard as /class/input/input1
[   38.808073] AppArmor: AppArmor initialized
[   38.808080] audit(1188572137.808:2): AppArmor initialized
[   38.808081] 
[   38.810682] AppArmor: Registered secondary security module: capability.
[   38.810684] Capability LSM initialized as secondary
[   38.816248] ACPI: SSDT 7FE92D5C, 0238 (r1  PmRef  Cpu0Ist     3000 INTL 
20060912)
[   38.816420] ACPI: SSDT 7FE92813, 04C4 (r1  PmRef  Cpu0Cst     3001 INTL 
20060912)
[   38.816882] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   38.827164] ACPI: Thermal Zone [THRM] (36 C)
[   39.179371] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[   39.179375] Copyright (c) 1999-2006 Intel Corporation.
[   39.179423] PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
[   39.179431] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[   39.179447] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   39.220055] usbcore: registered new interface driver usbfs
[   39.220072] usbcore: registered new interface driver hub
[   39.220086] usbcore: registered new device driver usb
[   39.220666] USB Universal Host Controller Interface driver v3.0
[   39.264333] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 
00:16:36:4e:4d:d7
[   39.277533] SCSI subsystem initialized
[   39.281873] libata version 2.21 loaded.
[   39.405571] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   39.405736] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> 
IRQ 19
[   39.405745] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   39.405749] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   39.405909] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 1
[   39.405940] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[   39.406034] usb usb1: configuration #1 chosen from 1 choice
[   39.406053] hub 1-0:1.0: USB hub found
[   39.406058] hub 1-0:1.0: 2 ports detected
[   11.436000] Marking TSC unstable due to: possible TSC halt in C2.
[   11.440000] Time: hpet clocksource has been installed.
[   11.516000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> 
IRQ 20
[   11.516000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   11.516000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   11.516000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 2
[   11.516000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[   11.516000] usb usb2: configuration #1 chosen from 1 choice
[   11.516000] hub 2-0:1.0: USB hub found
[   11.516000] hub 2-0:1.0: 2 ports detected
[   11.620000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> 
IRQ 18
[   11.620000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   11.620000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   11.620000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 3
[   11.620000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[   11.620000] usb usb3: configuration #1 chosen from 1 choice
[   11.620000] hub 3-0:1.0: USB hub found
[   11.620000] hub 3-0:1.0: 2 ports detected
[   11.724000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> 
IRQ 16
[   11.724000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   11.724000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   11.724000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus 
number 4
[   11.724000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[   11.724000] usb usb4: configuration #1 chosen from 1 choice
[   11.724000] hub 4-0:1.0: USB hub found
[   11.724000] hub 4-0:1.0: 2 ports detected
[   11.828000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> 
IRQ 19
[   11.828000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   11.828000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   11.828000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus 
number 5
[   11.828000] ehci_hcd 0000:00:1d.7: debug port 1
[   11.828000] PCI: cache line size of 32 is not supported by device 
0000:00:1d.7
[   11.828000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd2504000
[   11.832000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[   11.832000] usb usb5: configuration #1 chosen from 1 choice
[   11.832000] hub 5-0:1.0: USB hub found
[   11.832000] hub 5-0:1.0: 8 ports detected
[   11.860000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[   11.936000] ata_piix 0000:00:1f.2: version 2.11
[   11.936000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[   12.092000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> 
IRQ 20
[   12.092000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   12.092000] scsi0 : ata_piix
[   12.092000] scsi1 : ata_piix
[   12.092000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 
0x000118b0 irq 14
[   12.092000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 
0x000118b8 irq 15
[   12.256000] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001A, max UDMA/100
[   12.256000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   12.264000] ata1.00: configured for UDMA/100
[   12.364000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[   12.536000] usb 2-2: configuration #1 chosen from 1 choice
[   12.548000] usbcore: registered new interface driver hiddev
[   12.568000] input: Logitech USB RECEIVER as /class/input/input2
[   12.568000] input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on 
usb-0000:00:1d.1-2
[   12.568000] usbcore: registered new interface driver usbhid
[   12.568000] 
/build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: 
v2.6:USB HID core driver
[   12.584000] ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HV02, max UDMA/33
[   12.756000] ata2.00: configured for UDMA/33
[   12.756000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1234GS AH00 
PQ: 0 ANSI: 5
[   12.760000] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N HV02 
PQ: 0 ANSI: 5
[   12.760000] PCI: Enabling device 0000:0a:04.1 (0000 -> 0002)
[   12.760000] ACPI: PCI Interrupt 0000:0a:04.1[A] -> GSI 17 (level, low) -> 
IRQ 17
[   12.760000] PCI: Setting latency timer of device 0000:0a:04.1 to 64
[   12.812000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  
MMIO=[d2102000-d21027ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   12.820000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   12.820000] sd 0:0:0:0: [sda] Write Protect is off
[   12.820000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   12.820000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   12.820000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[   12.820000] sd 0:0:0:0: [sda] Write Protect is off
[   12.820000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   12.820000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   12.820000]  sda: sda1 sda2 < sda5 >
[   12.868000] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.872000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.872000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[   12.904000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda 
tray
[   12.904000] Uniform CD-ROM driver Revision: 3.20
[   12.904000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   13.136000] Attempting manual resume
[   13.136000] swsusp: Resume From Partition 8:5
[   13.136000] PM: Checking swsusp image.
[   13.136000] PM: Resume from disk failed.
[   13.180000] kjournald starting.  Commit interval 5 seconds
[   13.180000] EXT3-fs: mounted filesystem with ordered data mode.
[   14.084000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f00009c363a]
[   22.632000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full 
Duplex, Flow Control: RX/TX
[   22.632000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[   23.476000] Linux agpgart interface v0.102 (c) Dave Jones
[   23.600000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   23.604000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.916000] intel_rng: FWH not detected
[   24.300000] NET: Registered protocol family 17
[   24.312000] ieee80211_crypt: registered algorithm 'NULL'
[   24.316000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   24.316000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL 
PROTECTED]>
[   24.372000] nvidia: module license 'NVIDIA' taints kernel.
[   24.736000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[   24.736000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   24.736000] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 
13 18:21:22 PDT 2007
[   24.960000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver 
for Linux, 1.2.2mp
[   24.960000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   24.960000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[   24.960000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> 
IRQ 17
[   24.960000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   24.960000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   24.968000] iTCO_vendor_support: vendor-support=0
[   24.968000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   24.968000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   24.968000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   25.000000] Real Time Clock Driver v1.12ac
[   25.052000] Yenta: CardBus bridge found at 0000:0a:04.0 [1179:ff31]
[   25.052000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   25.052000] Yenta: Routing CardBus interrupts to PCI
[   25.052000] Yenta TI: socket 0000:0a:04.0, mfunc 0x01a21b22, devctl 0x66
[   25.188000] sdhci: Secure Digital Host Controller Interface driver
[   25.188000] sdhci: Copyright(c) Pierre Ossman
[   25.252000] usbcore: registered new interface driver lmpcm_usb
[   25.252000] 
/build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-386/misc/lmpcm_usb.c:
 v0.5.5:USB Logitech MediaPlay Cordless Mouse driver
[   25.284000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[   25.284000] Socket status: 30000006
[   25.284000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to 
#0e
[   25.284000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[   25.284000] cs: IO port probe 0x3000-0x3fff: clean.
[   25.284000] pcmcia: parent PCI bridge Memory window: 0xd2100000 - 0xd21fffff
[   25.284000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[   25.288000] PCI: Enabling device 0000:0a:04.2 (0000 -> 0002)
[   25.288000] ACPI: PCI Interrupt 0000:0a:04.2[A] -> GSI 17 (level, low) -> 
IRQ 17
[   25.288000] PCI: Setting latency timer of device 0000:0a:04.2 to 64
[   25.304000] sdhci: SDHCI controller found at 0000:0a:04.3 [104c:803c] (rev 0)
[   25.304000] PCI: Enabling device 0000:0a:04.3 (0000 -> 0002)
[   25.304000] ACPI: PCI Interrupt 0000:0a:04.3[A] -> GSI 17 (level, low) -> 
IRQ 17
[   25.304000] PCI: Setting latency timer of device 0000:0a:04.3 to 64
[   25.304000] mmc0: SDHCI at 0xd2102800 irq 17 DMA
[   25.480000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> 
IRQ 21
[   25.480000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   25.736000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x82a0b1, caps: 
0xb04713/0x60040d
[   25.736000] synaptics: Toshiba Satellite P100 detected, limiting rate to 
40pps.
[   25.764000] cs: IO port probe 0x100-0x3af: clean.
[   25.768000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   25.768000] cs: IO port probe 0x820-0x8ff: clean.
[   25.768000] cs: IO port probe 0xc00-0xcf7: clean.
[   25.768000] cs: IO port probe 0xa00-0xaff: clean.
[   25.772000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[   27.160000] ipw3945: Radio Frequency Kill Switch is On:
[   27.160000] Kill switch must be turned off for wireless networking to work.
[   31.020000] fuse init (API version 7.8)
[   31.060000] lp: driver loaded but no devices found
[   31.128000] Adding 4803392k swap on /dev/sda5.  Priority:-1 extents:1 
across:4803392k
[   31.432000] EXT3 FS on sda1, internal journal
[   31.860000] NET: Registered protocol family 10
[   31.860000] lo: Disabled Privacy Extensions
[   31.952000] AppArmor: Unregistered secondary security module: capability
[   37.448000] No dock devices found.
[   37.560000] ACPI: Battery Slot [BAT1] (battery present)
[   37.632000] ACPI: AC Adapter [ACAD] (on-line)
[   37.684000] input: Power Button (FF) as /class/input/input4
[   37.688000] ACPI: Power Button (FF) [PWRF]
[   37.716000] input: Lid Switch as /class/input/input5
[   37.720000] ACPI: Lid Switch [LID]
[   37.748000] input: Power Button (CM) as /class/input/input6
[   37.748000] ACPI: Power Button (CM) [PWRB]
[   37.788000] set_level status: 0
[   37.788000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   42.216000] eth0: no IPv6 routers present
[   42.792000] ppdev: user-space parallel port driver
[   43.108000] audit(1188572170.106:3): REJECTING m access to /etc/passwd 
(cupsd(5094) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[   43.112000] audit(1188572170.110:4): REJECTING m access to /etc/group 
(cupsd(5094) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[   43.112000] audit(1188572170.110:5): REJECTING m access to /etc/group 
(cupsd(5094) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[   43.268000] audit(1188572170.266:6): REJECTING w access to /dev/tty 
(cupsd(5094) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[   43.408000] apm: BIOS not found.
[   46.356000] AppArmor: Registered secondary security module: capability.
[   46.356000] Capability LSM initialized as secondary
[   46.728000] Bluetooth: Core ver 2.11
[   46.728000] NET: Registered protocol family 31
[   46.728000] Bluetooth: HCI device and connection manager initialized
[   46.728000] Bluetooth: HCI socket layer initialized
[   46.756000] Bluetooth: L2CAP ver 2.8
[   46.756000] Bluetooth: L2CAP socket layer initialized
[   46.844000] Bluetooth: RFCOMM socket layer initialized
[   46.844000] Bluetooth: RFCOMM TTY layer initialized
[   46.844000] Bluetooth: RFCOMM ver 1.8
[  650.404000] audit(1188572777.400:7): REJECTING m access to /etc/passwd 
(cupsd(5094) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[  650.404000] audit(1188572777.400:8): REJECTING m access to /etc/group 
(cupsd(5094) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[  650.404000] audit(1188572777.400:9): REJECTING m access to /etc/group 
(cupsd(5094) profile /usr/sbin/cupsd active /usr/sbin/cupsd)
[21029.440000] atkbd.c: Unknown key pressed (translated set 2, code 0x55 on 
isa0060/serio0).
[21029.440000] atkbd.c: Use 'setkeycodes 55 <keycode>' to make it known.
[21029.632000] atkbd.c: Unknown key released (translated set 2, code 0x55 on 
isa0060/serio0).
[21029.632000] atkbd.c: Use 'setkeycodes 55 <keycode>' to make it known.

** Affects: ubuntu
     Importance: Undecided
         Status: New

-- 
toshiba p100 series dsdt acpi error no sound, works with acpi turned off.
https://bugs.launchpad.net/bugs/136469
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to