With Linux kernel 3.13.11.5 none of the PUIS drives behind 88SE9130 and Sil3127
are detected on cold boot:
$ lsscsi
[4:0:0:0] disk ATA OCZ-VERTEX 1.3 /dev/sda
[12:0:0:0] process Marvell 91xx Config 1.01 -
partial dmesg output:
...
[ 3.683066] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.683090] ata13: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.683111] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.683130] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.683146] ata11: SATA link down (SStatus 0 SControl 300)
[ 3.683169] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.683203] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.683212] ata13.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 3.684240] ata13.00: configured for UDMA/66
[ 3.684356] ata12: SATA link down (SStatus 0 SControl 300)
...
[ 4.662341] ata11: irq_stat 0x80000040, connection status changed
[ 4.662342] ata11: SError: { DevExch }
[ 4.662345] ata11: hard resetting link
...
[ 5.710834] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.675914] ata8.00: qc timeout (cmd 0xef)
[ 8.711311] ata10.00: qc timeout (cmd 0xef)
[ 8.746959] ata8.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 8.782792] ata10.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 8.819139] ata6.00: qc timeout (cmd 0xef)
[ 8.855722] ata9.00: qc timeout (cmd 0xef)
[ 8.892321] ata6.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 8.929085] ata9.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 9.930707] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 10.737909] ata11.00: qc timeout (cmd 0xec)
[ 10.781869] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 10.819390] ata11: hard resetting link
[ 10.965705] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 11.021644] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 11.061603] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 11.205470] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.091817] ata8.00: qc timeout (cmd 0xef)
[ 21.128443] ata9.00: qc timeout (cmd 0xef)
[ 21.135766] ata9.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 21.135768] ata9: limiting SATA link speed to 1.5 Gbps
[ 21.164338] ata8.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 21.164340] ata8: limiting SATA link speed to 1.5 Gbps
[ 21.231668] ata11.00: qc timeout (cmd 0xec)
[ 21.239664] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 21.239666] ata11: limiting SATA link speed to 1.5 Gbps
[ 21.239667] ata11: hard resetting link
[ 22.190763] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 23.169799] ata10.00: qc timeout (cmd 0xec)
[ 23.205893] ata6.00: qc timeout (cmd 0x27)
[ 23.241784] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 23.277770] ata10: limiting SATA link speed to 1.5 Gbps
[ 23.313732] ata6.00: failed to read native max address (err_mask=0x4)
[ 23.349661] ata6.00: HPA support seems broken, skipping HPA handling
[ 23.385582] ata6: limiting SATA link speed to 1.5 Gbps
[ 25.487552] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 25.523509] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 25.559271] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 25.611429] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 30.586571] ata11.00: qc timeout (cmd 0xef)
[ 30.622084] ata8.00: qc timeout (cmd 0x27)
[ 30.657249] ata6.00: qc timeout (cmd 0xec)
[ 30.692005] ata8.00: failed to read native max address (err_mask=0x4)
[ 30.726956] ata8.00: HPA support seems broken, skipping HPA handling
[ 30.761754] ata11.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 30.796729] ata11: hard resetting link
[ 30.831556] ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 31.901300] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 31.934849] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 31.973220] ata11: EH complete
[ 32.004807] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 35.581694] ata9.00: qc timeout (cmd 0xef)
[ 35.611723] ata10.00: qc timeout (cmd 0xec)
[ 35.641444] ata9.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 35.671355] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1347936
Title:
not all drives detected after setting power-up in standby
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1347936/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
