Public bug reported:
ASUSTeK P7131 Hybrid has stopped loading frontend since upgrade to
3.13.0-40-generic. oTher USB DVB TV device works fine
demsg as follows:
[ 1.460135] usb 4-1: New USB device found, idVendor=05e3, idProduct=0612
[ 1.460137] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.460138] usb 4-1: Product: USB3.0 Hub 123
[ 1.460139] usb 4-1: Manufacturer: GenesysLogic
[ 1.470494] hub 4-1:1.0: USB hub found
[ 1.470937] hub 4-1:1.0: 3 ports detected
[ 1.574592] tsc: Refined TSC clocksource calibration: 3392.292 MHz
[ 1.587109] usb 4-4: new SuperSpeed USB device number 3 using xhci_hcd
[ 1.607824] usb 4-4: New USB device found, idVendor=05e3, idProduct=0612
[ 1.607828] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.607831] usb 4-4: Product: USB3.0 Hub 123
[ 1.607833] usb 4-4: Manufacturer: GenesysLogic
[ 1.618023] hub 4-4:1.0: USB hub found
[ 1.618465] hub 4-4:1.0: 3 ports detected
[ 1.786771] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 1.809345] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
[ 1.809349] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.809352] usb 3-1: Product: USB2.0 Hub 456
[ 1.809354] usb 3-1: Manufacturer: GenesysLogic
[ 1.810124] hub 3-1:1.0: USB hub found
[ 1.810894] hub 3-1:1.0: 3 ports detected
[ 1.926769] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[ 1.949355] usb 3-4: New USB device found, idVendor=05e3, idProduct=0610
[ 1.949359] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.949362] usb 3-4: Product: USB2.0 Hub 456
[ 1.949364] usb 3-4: Manufacturer: GenesysLogic
[ 1.950133] hub 3-4:1.0: USB hub found
[ 1.950884] hub 3-4:1.0: 3 ports detected
[ 2.026917] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 2.125502] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c521
[ 2.125506] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.125509] usb 1-1.1: Product: USB Receiver
[ 2.125511] usb 1-1.1: Manufacturer: Logitech
[ 2.129391] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.137989] usbcore: registered new interface driver usbhid
[ 2.137991] usbhid: USB HID core driver
[ 2.138961] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input5
[ 2.139042] hid-generic 0003:046D:C521.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 2.141473] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input6
[ 2.141551] hid-generic 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID
v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 2.198995] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 2.296936] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0745
[ 2.296941] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.296943] usb 1-1.2: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0
[ 2.296945] usb 1-1.2: Manufacturer: Microsoft
[ 2.300438] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
[ 2.300605] hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11
Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver
v2.0] on usb-0000:00:1a.0-1.2/input0
[ 2.306218] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input8
[ 2.306530] hid-generic 0003:045E:0745.0004: input,hidraw3: USB HID v1.11
Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0]
on usb-0000:00:1a.0-1.2/input1
[ 2.322023] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input9
[ 2.322320] hid-generic 0003:045E:0745.0005: input,hiddev0,hidraw4: USB HID
v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0] on usb-0000:00:1a.0-1.2/input2
[ 2.391073] usb 2-1.7: new high-speed USB device number 3 using ehci-pci
[ 2.504921] usb 2-1.7: New USB device found, idVendor=0db0, idProduct=3871
[ 2.504926] usb 2-1.7: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.504928] usb 2-1.7: Product: 802.11 n WLAN
[ 2.504930] usb 2-1.7: Manufacturer: Ralink
[ 2.504932] usb 2-1.7: SerialNumber: 1.0
[ 2.575147] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
[ 2.575245] Switched to clocksource tsc
[ 2.864958] usb 2-1.8: New USB device found, idVendor=0db0, idProduct=a871
[ 2.864963] usb 2-1.8: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 7.527690] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 7.785613] random: nonblocking pool is initialized
[ 19.090464] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.090468] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 19.173157] systemd-udevd[383]: starting version 204
[ 19.425722] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 19.443466] lp: driver loaded but no devices found
[ 19.446576] ppdev: user-space parallel port driver
[ 19.452631] wmi: Mapper loaded
[ 19.466977] nvidia: module license 'NVIDIA' taints kernel.
[ 19.466981] Disabling lock debugging due to kernel taint
[ 19.469551] nvidia: module verification failed: signature and/or required
key missing - tainting kernel
[ 19.472280] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 19.472355] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.117 Tue Nov
26 21:25:36 PST 2013
[ 19.474135] mei_me 0000:00:16.0: irq 56 for MSI/MSI-X
[ 19.481033] Linux video capture interface: v2.00
[ 19.484281] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO
conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 19.484285] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 19.484288] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO
conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 19.484290] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 19.484290] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO
conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 19.484292] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO
conflicts with Region \_SB_.PCI0.RLED.DBG0 2 (20131115/utaddress-251)
[ 19.484294] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 19.484294] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 19.490866] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 19.491014] saa7133[0]: found at 0000:3b:01.0, rev: 209, irq: 19, latency:
32, mmio: 0xef100000
[ 19.491024] saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid
[card=112,autodetected]
[ 19.491041] saa7133[0]: board init: gpio is 0
[ 19.492249] Bluetooth: Core ver 2.17
[ 19.492263] NET: Registered protocol family 31
[ 19.492264] Bluetooth: HCI device and connection manager initialized
[ 19.492271] Bluetooth: HCI socket layer initialized
[ 19.492273] Bluetooth: L2CAP socket layer initialized
[ 19.492277] Bluetooth: SCO socket layer initialized
[ 19.493850] usbcore: registered new interface driver btusb
[ 19.507999] snd_hda_intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 19.514837] Registered IR keymap rc-asus-pc39
[ 19.514891] input: saa7134 IR (ASUSTeK P7131 Hybri as
/devices/pci0000:00/0000:00:1c.5/0000:34:00.0/0000:35:09.0/0000:3a:00.0/0000:3b:01.0/rc/rc0/input10
[ 19.514928] rc0: saa7134 IR (ASUSTeK P7131 Hybri as
/devices/pci0000:00/0000:00:1c.5/0000:34:00.0/0000:35:09.0/0000:3a:00.0/0000:3b:01.0/rc/rc0
[ 19.517395] IR NEC protocol handler initialized
[ 19.518477] SKU: Nid=0x1d sku_cfg=0x4016f601
[ 19.518478] SKU: port_connectivity=0x1
[ 19.518480] SKU: enable_pcbeep=0x1
[ 19.518481] SKU: check_sum=0x00000006
[ 19.518481] SKU: customization=0x000000f6
[ 19.518482] SKU: external_amp=0x0
[ 19.518483] SKU: platform_type=0x0
[ 19.518484] SKU: swap=0x0
[ 19.518485] SKU: override=0x1
[ 19.519208] autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 19.519210] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 19.519212] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 19.519212] mono: mono_out=0x0
[ 19.519214] dig-out=0x11/0x1e
[ 19.519214] inputs:
[ 19.519216] Front Mic=0x19
[ 19.519218] Rear Mic=0x18
[ 19.519219] Line=0x1a
[ 19.519220] realtek: No valid SSID, checking pincfg 0x4016f601 for NID 0x1d
[ 19.519221] realtek: Enabling init ASM_ID=0xf601 CODEC_ID=10ec0899
[ 19.519567] IR RC5(x) protocol handler initialized
[ 19.522472] IR RC6 protocol handler initialized
[ 19.522688] IR JVC protocol handler initialized
[ 19.527999] IR Sony protocol handler initialized
[ 19.529885] IR SANYO protocol handler initialized
[ 19.529935] IR MCE Keyboard/mouse protocol handler initialized
[ 19.530534] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 19.531345] input: HDA Intel PCH Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 19.531417] input: HDA Intel PCH Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 19.531430] input: MCE IR Keyboard/Mouse (saa7134) as
/devices/virtual/input/input18
[ 19.531656] input: HDA Intel PCH Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 19.532502] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 19.532548] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 19.532592] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 19.532710] lirc_dev: IR Remote Control driver registered, major 248
[ 19.532830] hda_intel: Disabling MSI
[ 19.532836] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 19.532867] hda-intel 0000:01:00.1: Disabling 64bit DMA
[ 19.533430] rc rc0: lirc_dev: driver ir-lirc-codec (saa7134) registered at
minor = 0
[ 19.533431] IR LIRC bridge handler initialized
[ 19.536121] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[ 19.678923] saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c
55 d2 b2 92
[ 19.678934] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff
ff ff ff ff
[ 19.678943] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5
ff ff ff ff
[ 19.678951] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.678959] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff
ff ff ff ff
[ 19.678976] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.678979] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.678982] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.678986] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.678989] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.678993] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.678996] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.679000] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.679003] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.679006] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.679010] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 19.692978] intel_rapl: domain uncore energy ctr 0:0 not working, skip
[ 19.714929] tuner 0-004b: Tuner -1 found with type(s) Radio TV.
[ 19.794972] tda829x 0-004b: setting tuner address to 61
[ 19.844943] cfg80211: Calling CRDA to update world regulatory domain
[ 19.857382] type=1400 audit(1416661838.671:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=563
comm="apparmor_parser"
[ 19.857387] type=1400 audit(1416661838.671:3): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=563
comm="apparmor_parser"
[ 19.857389] type=1400 audit(1416661838.671:4): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=563 comm="apparmor_parser"
[ 19.857395] type=1400 audit(1416661838.671:5): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=561
comm="apparmor_parser"
[ 19.857400] type=1400 audit(1416661838.671:6): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=561
comm="apparmor_parser"
[ 19.857402] type=1400 audit(1416661838.671:7): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=561 comm="apparmor_parser"
[ 19.857408] type=1400 audit(1416661838.671:8): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=562
comm="apparmor_parser"
[ 19.857412] type=1400 audit(1416661838.671:9): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=562
comm="apparmor_parser"
[ 19.857414] type=1400 audit(1416661838.671:10): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=562 comm="apparmor_parser"
[ 19.857640] type=1400 audit(1416661838.671:11): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=563
comm="apparmor_parser"
[ 19.858998] tda829x 0-004b: type set to tda8290+75a
[ 19.927161] usb 2-1.7: reset high-speed USB device number 3 using ehci-pci
[ 19.935082] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 19.935175] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 20.033941] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201
detected
[ 20.058566] init: failsafe main process (719) killed by TERM signal
[ 20.062577] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 20.064767] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.064933] usbcore: registered new interface driver rt2800usb
[ 20.077912] cfg80211: World regulatory domain updated:
[ 20.077914] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 20.077915] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 20.077916] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 20.077917] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 20.077918] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 20.077918] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 21.262013] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.262015] Bluetooth: BNEP filters: protocol multicast
[ 21.262021] Bluetooth: BNEP socket layer initialized
[ 21.262347] Bluetooth: RFCOMM TTY layer initialized
[ 21.262352] Bluetooth: RFCOMM socket layer initialized
[ 21.262356] Bluetooth: RFCOMM ver 1.11
[ 21.631863] init: cups main process (933) killed by HUP signal
[ 21.631870] init: cups main process ended, respawning
[ 23.000515] e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
[ 23.104574] e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
[ 23.104660] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.104889] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.256145] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 23.256337] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 23.257743] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading
firmware file 'rt2870.bin'
[ 23.365905] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware
detected - version: 0.29
[ 23.628825] saa7133[0]: registered device video0 [v4l2]
[ 23.628848] saa7133[0]: registered device vbi0
[ 23.628872] saa7133[0]: registered device radio0
[ 23.630591] saa7134 ALSA driver for DMA sound loaded
[ 23.630609] saa7133[0]/alsa: saa7133[0] at 0xef100000 irq 19 registered as
card -2
[ 23.633154] dvb_init() allocating 1 frontend
[ 23.664801] DVB: registering new adapter (saa7133[0])
[ 23.664805] saa7134 0000:3b:01.0: DVB: registering adapter 0 frontend 0
(Philips TDA10046H DVB-T)...
[ 23.740653] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.740997] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.904928] tda1004x: setting up plls for 48MHz sampling clock
[ 23.996906] init: samba-ad-dc main process (1389) terminated with status 1
[ 24.369156] tda1004x: found firmware revision 20 -- ok
[ 24.870419] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 24.870538] e1000e 0000:33:00.0 eth1: 10/100 speed: disabling TSO
[ 24.870753] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 28.934508] bio: create slab <bio-1> at 1
[ 29.979947] tda1004x: setting up plls for 48MHz sampling clock
[ 30.264045] tda1004x: found firmware revision 20 -- ok
[ 32.052707] Adding 8355836k swap on /dev/mapper/cryptswap1. Priority:-1
extents:1 across:8355836k FS
[ 33.571694] init: plymouth-upstart-bridge main process ended, respawning
[ 33.574875] init: plymouth-upstart-bridge main process (2031) terminated
with status 1
[ 33.574882] init: plymouth-upstart-bridge main process ended, respawning
[ 51.435802] audit_printk_skb: 234 callbacks suppressed
[ 51.435804] type=1400 audit(1416661870.240:90): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=2805 comm="apparmor_parser"
[ 51.435808] type=1400 audit(1416661870.240:91): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=2805 comm="apparmor_parser"
[ 51.436066] type=1400 audit(1416661870.240:92): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=2805 comm="apparmor_parser"
[ 376.488514] usb 3-4.3: new high-speed USB device number 4 using xhci_hcd
[ 376.504759] usb 3-4.3: New USB device found, idVendor=0b05, idProduct=173f
[ 376.504764] usb 3-4.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 376.504766] usb 3-4.3: Product: ASUS DVBT Tuner
[ 376.504769] usb 3-4.3: Manufacturer: ASUSTeK
[ 376.504771] usb 3-4.3: SerialNumber: 0390000105
[ 376.651882] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner' in cold
state, will try to load a firmware
[ 376.677755] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 376.742538] dib0700: firmware started successfully.
[ 377.244103] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner' in warm
state.
[ 377.244170] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[ 377.244219] DVB: registering new adapter (ASUS My Cinema U3100 Mini DVBT
Tuner)
[ 377.453582] usb 3-4.3: DVB: registering adapter 1 frontend 0 (DiBcom
7000PC)...
[ 377.666542] DiB0070: successfully identified
[ 377.711643] Registered IR keymap rc-dib0700-rc5
[ 377.711767] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/rc/rc1/input21
[ 377.711886] rc1: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/rc/rc1
[ 377.712003] dvb-usb: schedule remote query interval to 50 msecs.
[ 377.712009] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner successfully
initialized and connected.
[ 377.712149] usbcore: registered new interface driver dvb_usb_dib0700
[ 1012.751207] type=1400 audit(1416662831.454:93): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=5447 comm="apparmor_parser"
[ 1012.751214] type=1400 audit(1416662831.454:94): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=5447 comm="apparmor_parser"
[ 1012.751570] type=1400 audit(1416662831.454:95): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=5447 comm="apparmor_parser"
[ 1604.582196] systemd-hostnamed[6283]: Warning: nss-myhostname is not
installed. Changing the local hostname might make it unresolveable. Please
install nss-myhostname!
[ 1660.310190] type=1400 audit(1416663478.705:96): apparmor="DENIED"
operation="open" profile="/usr/bin/evince-thumbnailer" name="/usr/bin/fix-qdf"
pid=6296 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000
ouid=0
[ 1660.322851] type=1400 audit(1416663478.717:97): apparmor="DENIED"
operation="open" profile="/usr/bin/evince-thumbnailer" name="/usr/bin/fix-qdf"
pid=6296 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000
ouid=0
[ 3091.832828] usb 3-4.3: USB disconnect, device number 4
[ 3091.842790] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner successfully
deinitialized and disconnected.
[ 3714.364767] systemd-hostnamed[8788]: Warning: nss-myhostname is not
installed. Changing the local hostname might make it unresolveable. Please
install nss-myhostname!
[ 3898.460828] usb 3-4.3: new high-speed USB device number 5 using xhci_hcd
[ 3898.477106] usb 3-4.3: New USB device found, idVendor=0b05, idProduct=173f
[ 3898.477111] usb 3-4.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3898.477114] usb 3-4.3: Product: ASUS DVBT Tuner
[ 3898.477116] usb 3-4.3: Manufacturer: ASUSTeK
[ 3898.477118] usb 3-4.3: SerialNumber: 0390000105
[ 3898.477448] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner' in cold
state, will try to load a firmware
[ 3898.477498] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 3898.542212] dib0700: firmware started successfully.
[ 3899.045743] dvb-usb: found a 'ASUS My Cinema U3100 Mini DVBT Tuner' in warm
state.
[ 3899.045804] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[ 3899.045846] DVB: registering new adapter (ASUS My Cinema U3100 Mini DVBT
Tuner)
[ 3899.254661] usb 3-4.3: DVB: registering adapter 1 frontend 0 (DiBcom
7000PC)...
[ 3899.467765] DiB0070: successfully identified
[ 3899.467777] Registered IR keymap rc-dib0700-rc5
[ 3899.467895] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/rc/rc2/input22
[ 3899.468028] rc2: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.3/rc/rc2
[ 3899.468143] dvb-usb: schedule remote query interval to 50 msecs.
[ 3899.468149] dvb-usb: ASUS My Cinema U3100 Mini DVBT Tuner successfully
initialized and connected.
[71938.349363] perf samples too long (2513 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
[114739.676877] type=1400 audit(1416776502.124:98): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=2979 comm="apparmor_parser"
[114739.676882] type=1400 audit(1416776502.124:99): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=2979 comm="apparmor_parser"
[114739.677121] type=1400 audit(1416776502.124:100): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=2979 comm="apparmor_parser"
[200605.365878] type=1400 audit(1416862325.461:101): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=28809 comm="apparmor_parser"
[200605.365883] type=1400 audit(1416862325.461:102): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=28809 comm="apparmor_parser"
[200605.366122] type=1400 audit(1416862325.461:103): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=28809 comm="apparmor_parser"
[212056.559492] usb 1-1.2: USB disconnect, device number 4
[287277.945554] type=1400 audit(1416948955.240:104): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=17221 comm="apparmor_parser"
[287277.945559] type=1400 audit(1416948955.240:105): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=17221 comm="apparmor_parser"
[287277.945798] type=1400 audit(1416948955.240:106): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd"
pid=17221 comm="apparmor_parser"
[312626.241424] usb 1-1.2: new full-speed USB device number 5 using ehci-pci
[312626.339613] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0745
[312626.339618] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[312626.339621] usb 1-1.2: Product: Microsoft\xffffffc2\xffffffae\xffffffae
Nano Transceiver v2.0
[312626.339623] usb 1-1.2: Manufacturer: Microsoft
[312626.342524] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input23
[312626.342791] hid-generic 0003:045E:0745.0006: input,hidraw2: USB HID v1.11
Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver
v2.0] on usb-0000:00:1a.0-1.2/input0
[312626.348734] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input24
[312626.348992] hid-generic 0003:045E:0745.0007: input,hidraw3: USB HID v1.11
Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0]
on usb-0000:00:1a.0-1.2/input1
[312626.365428] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input25
[312626.365944] hid-generic 0003:045E:0745.0008: input,hiddev0,hidraw4: USB HID
v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0] on usb-0000:00:1a.0-1.2/input2
[312897.782203] usb 1-1.2: USB disconnect, device number 5
[314034.222179] systemd-hostnamed[26835]: Warning: nss-myhostname is not
installed. Changing the local hostname might make it unresolveable. Please
install nss-myhostname!
[314082.731164] usb 3-4.2: new high-speed USB device number 6 using xhci_hcd
[314082.748067] usb 3-4.2: New USB device found, idVendor=04e8, idProduct=6860
[314082.748074] usb 3-4.2: New USB device strings: Mfr=2, Product=3,
SerialNumber=4
[314082.748078] usb 3-4.2: Product: Galaxy Nexus
[314082.748082] usb 3-4.2: Manufacturer: samsung
[314082.748086] usb 3-4.2: SerialNumber: 0149E1311700D00C
[314240.655130] usb 3-4.2: usbfs: process 27020 (events) did not claim
interface 0 before use
[314246.112265] usb 3-4.2: USB disconnect, device number 6
[315290.363732] usb 1-1.2: new full-speed USB device number 6 using ehci-pci
[315290.461904] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0745
[315290.461909] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[315290.461912] usb 1-1.2: Product: Microsoft\xffffffc2\xffffffae\xffffffae
Nano Transceiver v2.0
[315290.461914] usb 1-1.2: Manufacturer: Microsoft
[315290.464554] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input26
[315290.464764] hid-generic 0003:045E:0745.0009: input,hidraw2: USB HID v1.11
Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver
v2.0] on usb-0000:00:1a.0-1.2/input0
[315290.470738] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input27
[315290.471020] hid-generic 0003:045E:0745.000A: input,hidraw3: USB HID v1.11
Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0]
on usb-0000:00:1a.0-1.2/input1
[315290.487785] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0 as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input28
[315290.488194] hid-generic 0003:045E:0745.000B: input,hiddev0,hidraw4: USB HID
v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano
Transceiver v2.0] on usb-0000:00:1a.0-1.2/input2
[315765.595646] traps: chromium-browse[27712] general protection
ip:7f21d39d0117 sp:7fffce7ee4d0 error:0 in libc-2.19.so[7f21d3996000+1bb000]
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: libdvb-dev 0.5.5.1-5.1
ProcVersionSignature: Ubuntu 3.13.0-40.69-generic 3.13.11.10
Uname: Linux 3.13.0-40-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.6
Architecture: amd64
CurrentDesktop: Unity
Date: Wed Nov 26 15:54:01 2014
Dependencies:
EcryptfsInUse: Yes
InstallationDate: Installed on 2013-03-22 (613 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
ProcEnviron:
LANGUAGE=en_AU:en
PATH=(custom, no user)
XDG_RUNTIME_DIR=<set>
LANG=en_AU.UTF-8
SHELL=/bin/bash
SourcePackage: libdvb
UpgradeStatus: Upgraded to trusty on 2014-04-27 (212 days ago)
** Affects: libdvb (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug trusty
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1396445
Title:
TV Card frontend device fails to open
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libdvb/+bug/1396445/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
