realtimexxx, as per http://www.dell.com/support/home/us/en/19/product-support/product/optiplex-745/drivers an update to your computer's buggy and outdated BIOS is available (2.6.6). If you update to this following https://help.ubuntu.com/community/BIOSUpdate does it change anything? If it doesn't, could you please both specify what happened, and provide the output of the following terminal command: sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date
For more on BIOS updates and linux, please see https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette . Please note your current BIOS is already in the Bug Description, so posting this on the old BIOS would not be helpful. As well, you don't have to create a new bug report. Once the BIOS is updated, and the information above is provided, then please mark this report Status Confirmed. Thank you for your understanding. ** Description changed: The system crashes with a blank screen many times, 8 or 10 times this AM. Chrome crashes, Firefox crashes, PCManFM, copying and pasting, scrolling, and many other apps. It crashed this AM during an Update system and nothing else was running. I think I was scrolling the - details. I can not give any dumps because it won't run long enough. I + details. I can not give any dumps because it won't run long enough. I listed some info in terminal and it crashed scrolling it. Maybe it is hardware, but it seems to be running now for at least 30 mins. I think I am going to change distros. I tried many things including running some live CDs and DVDs with differing versions of Ubuntu on them to see if I could determine a place when they stopped running, and thought I figured it out, but I did not have it figured out. It has been crashing since I installed 14.04, I think. I may have some non-standard - repositories. + repositories. I ran 12.04 for about a year or 2. - I am running on a Dell Optiplex 745 and ran 12.04 for about a year or 2. - I felt I was forced to change when it was no longer supported. - - I wrote, designed, debugged, tested, documented software since the mid - 60s and worked on many differing apps including real time traffic - control, signal processing on TI DSPs, mapping apps, accounting, - calibrating inertial guidance systems, etc., etc. I am not naive. - - Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12 - - It just crashed again while scrolling the sudo lspci-vnvn > lspci- - vnvn.log - - 00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub [8086:2990] (rev 02) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- - Latency: 0 - Capabilities: [e0] Vendor Specific Information: Len=09 <?> - Kernel driver in use: agpgart-intel - - 00:01.0 PCI bridge [0604]: Intel Corporation 82Q963/Q965 PCI Express Root Port [8086:2991] (rev 02) (prog-if 00 [Normal decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 - Memory behind bridge: dfc00000-dfcfffff - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- - BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- - Capabilities: [88] Subsystem: Dell Device [1028:01da] - Capabilities: [80] Power Management version 3 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- - Address: fee0300c Data: 4191 - Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0 - ExtTag- RBE+ - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- - LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Exit Latency L0s <1us, L1 <4us - ClockPM- Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ CommClk- - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- - Slot #0, PowerLimit 0.000W; Interlock- NoCompl+ - SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- - Control: AttnInd Off, PwrInd On, Power- Interlock- - SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- - Changed: MRL- PresDet- LinkState- - RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- - RootCap: CRSVisible- - RootSta: PME ReqID 0000, PMEStatus- PMEPending- - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed- WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending+ InProgress- - Capabilities: [140 v1] Root Complex Link - Desc: PortNumber=02 ComponentID=01 EltType=Config - Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ - Addr: 00000000feda5000 - Kernel driver in use: pcieport - - 00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q963/Q965 Integrated Graphics Controller [8086:2992] (rev 02) (prog-if 00 [VGA controller]) - Subsystem: Dell Device [1028:01da] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 43 - Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=1M] - Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] - Region 4: I/O ports at ecb8 [size=8] - Expansion ROM at <unassigned> [disabled] - Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- - Address: fee0300c Data: 41d1 - Capabilities: [d0] Power Management version 2 - Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Kernel driver in use: i915 - - 00:02.1 Display controller [0380]: Intel Corporation 82Q963/Q965 Integrated Graphics Controller [8086:2993] (rev 02) - Subsystem: Dell Device [1028:01da] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=1M] - Capabilities: [d0] Power Management version 2 - Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - - 00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 16 - Region 4: I/O ports at ff20 [size=32] - Kernel driver in use: uhci_hcd - - 00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin B routed to IRQ 17 - Region 4: I/O ports at ff00 [size=32] - Kernel driver in use: uhci_hcd - - 00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI]) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin C routed to IRQ 22 - Region 0: Memory at dfdfbc00 (32-bit, non-prefetchable) [size=1K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [58] Debug port: BAR=1 offset=00a0 - Kernel driver in use: ehci-pci - - 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 44 - Region 0: Memory at dfdfc000 (64-bit, non-prefetchable) [size=16K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ - Address: 00000000fee0300c Data: 41e1 - Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0 - ExtTag- RBE- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed- WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 - Status: NegoPending- InProgress- - Capabilities: [130 v1] Root Complex Link - Desc: PortNumber=0f ComponentID=02 EltType=Config - Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ - Addr: 00000000feda8000 - Kernel driver in use: snd_hda_intel - - 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 - I/O behind bridge: 00001000-00001fff - Memory behind bridge: dfb00000-dfbfffff - Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- - BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- - Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0 - ExtTag- RBE+ - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- - LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <256ns, L1 <4us - ClockPM- Surprise- LLActRep+ BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ - Slot #4, PowerLimit 10.000W; Interlock- NoCompl- - SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- - Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- - SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- - Changed: MRL- PresDet- LinkState- - RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- - RootCap: CRSVisible- - RootSta: PME ReqID 0000, PMEStatus- PMEPending- - Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- - Address: fee0300c Data: 41a1 - Capabilities: [90] Subsystem: Dell OptiPlex 745 [1028:01da] - Capabilities: [a0] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed+ WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - Capabilities: [180 v1] Root Complex Link - Desc: PortNumber=01 ComponentID=02 EltType=Config - Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ - Addr: 00000000feda8001 - Kernel driver in use: pcieport - - 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 - I/O behind bridge: 00003000-00003fff - Memory behind bridge: dfa00000-dfafffff - Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- - BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- - Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0 - ExtTag- RBE+ - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- - LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <256ns, L1 <4us - ClockPM- Surprise- LLActRep+ BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- - SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ - Slot #0, PowerLimit 10.000W; Interlock- NoCompl- - SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- - Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- - SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- - Changed: MRL- PresDet+ LinkState+ - RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- - RootCap: CRSVisible- - RootSta: PME ReqID 0000, PMEStatus- PMEPending- - Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- - Address: fee0300c Data: 41b1 - Capabilities: [90] Subsystem: Dell OptiPlex 745 [1028:01da] - Capabilities: [a0] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed+ WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - Capabilities: [180 v1] Root Complex Link - Desc: PortNumber=05 ComponentID=02 EltType=Config - Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ - Addr: 00000000feda8001 - Kernel driver in use: pcieport - - 00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 23 - Region 4: I/O ports at ff80 [size=32] - Kernel driver in use: uhci_hcd - - 00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin B routed to IRQ 17 - Region 4: I/O ports at ff60 [size=32] - Kernel driver in use: uhci_hcd - - 00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin C routed to IRQ 18 - Region 4: I/O ports at ff40 [size=32] - Kernel driver in use: uhci_hcd - - 00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI]) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 23 - Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [58] Debug port: BAR=1 offset=00a0 - Kernel driver in use: ehci-pci - - 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev f2) (prog-if 01 [Subtractive decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 - Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- - BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- - Capabilities: [50] Subsystem: Dell Device [1028:01da] - - 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller [8086:2810] (rev 02) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Capabilities: [e0] Vendor Specific Information: Len=0c <?> - Kernel driver in use: lpc_ich - - 00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port SATA Controller [IDE mode] [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin C routed to IRQ 20 - Region 0: I/O ports at fe00 [size=8] - Region 1: I/O ports at fe10 [size=4] - Region 2: I/O ports at fe20 [size=8] - Region 3: I/O ports at fe30 [size=4] - Region 4: I/O ports at fec0 [size=16] - Region 5: I/O ports at ecc0 [size=16] - Capabilities: [70] Power Management version 3 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) - Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- - Kernel driver in use: ata_piix - - 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Interrupt: pin C routed to IRQ 9 - Region 0: Memory at dfdfbb00 (32-bit, non-prefetchable) [size=256] - Region 4: I/O ports at ece0 [size=32] - - 00:1f.5 IDE interface [0101]: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 2 port SATA Controller [IDE mode] [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO]) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin C routed to IRQ 20 - Region 0: I/O ports at fe40 [size=8] - Region 1: I/O ports at fe50 [size=4] - Region 2: I/O ports at fe60 [size=8] - Region 3: I/O ports at fe70 [size=4] - Region 4: I/O ports at fed0 [size=16] - Region 5: I/O ports at ecd0 [size=16] - Capabilities: [70] Power Management version 3 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) - Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- - Kernel driver in use: ata_piix - - 03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express [14e4:167a] (rev 02) - Subsystem: Dell OptiPlex 745 [1028:01da] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 45 - Region 0: Memory at dfaf0000 (64-bit, non-prefetchable) [size=64K] - Expansion ROM at <ignored> [disabled] - Capabilities: [48] Power Management version 3 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- - Capabilities: [50] Vital Product Data - Product Name: Broadcom NetXtreme Gigabit Ethernet Controller - Read-only fields: - [PN] Part number: BCM95754 - [EC] Engineering changes: 106679-15 - [SN] Serial number: 0123456789 - [MN] Manufacture ID: 31 34 65 34 - [RV] Reserved: checksum good, 28 byte(s) reserved - Read/write fields: - [YA] Asset tag: 01da.006 - [RW] Read-write area: 110 byte(s) free - End - Capabilities: [58] Vendor Specific Information: Len=78 <?> - Capabilities: [e8] MSI: Enable+ Count=1/1 Maskable- 64bit+ - Address: 00000000fee0200c Data: 4122 - Capabilities: [d0] Express (v1) Endpoint, MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited - ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- - DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- - RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 512 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- - LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <4us, L1 <64us - ClockPM- Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - Capabilities: [100 v1] Advanced Error Reporting - UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- - UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- - UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- - CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- - CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ - AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- - Capabilities: [13c v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed- WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff - Status: NegoPending- InProgress- - Capabilities: [160 v1] Device Serial Number 00-1a-a0-ff-fe-46-ef-3f - Capabilities: [16c v1] Power Budgeting <?> - Kernel driver in use: tg3 - --- + --- ApportVersion: 2.14.1-0ubuntu3.6 Architecture: amd64 AudioDevicesInUse: - USER PID ACCESS COMMAND - /dev/snd/controlC0: realtime 1698 F.... lxpanel + USER PID ACCESS COMMAND + /dev/snd/controlC0: realtime 1698 F.... lxpanel CRDA: Error: [Errno 2] No such file or directory CurrentDesktop: LXDE DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=fb410345-ccdf-4803-826d-215c019e61af InstallationDate: Installed on 2014-12-08 (48 days ago) InstallationMedia: Lubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140416.2) IwConfig: - eth0 no wireless extensions. - - lo no wireless extensions. + eth0 no wireless extensions. + + lo no wireless extensions. MachineType: Dell Inc. OptiPlex 745 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-44-generic root=/dev/mapper/lubuntu--vg-root ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12 RelatedPackageVersions: - linux-restricted-modules-3.13.0-44-generic N/A - linux-backports-modules-3.13.0-44-generic N/A - linux-firmware 1.127.11 + linux-restricted-modules-3.13.0-44-generic N/A + linux-backports-modules-3.13.0-44-generic N/A + linux-firmware 1.127.11 RfKill: - + Tags: trusty Uname: Linux 3.13.0-44-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 05/21/2007 dmi.bios.vendor: Dell Inc. dmi.bios.version: 2.3.1 dmi.board.name: 0GX297 dmi.board.vendor: Dell Inc. dmi.chassis.type: 15 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr2.3.1:bd05/21/2007:svnDellInc.:pnOptiPlex745:pvr:rvnDellInc.:rn0GX297:rvr:cvnDellInc.:ct15:cvr: dmi.product.name: OptiPlex 745 dmi.sys.vendor: Dell Inc. ** Tags added: bios-outdated-2.6.6 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1414477 Title: system crashes with blank screen ususlly white To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1414477/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
