Linux petrata 2.6.20-16-generic #2 SMP Fri Aug 31 00:55:27 UTC 2007 i686
GNU/Linux
This is happening to me when I run k3b:
Sep 14 21:17:00 petrata kernel: [ 233.472645] res
40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
Sep 14 21:17:07 petrata kernel: [ 240.472535] ata2: port is slow to respond,
please be patient (Status 0xd0)
Sep 14 21:17:30 petrata kernel: [ 263.475021] ata2: soft resetting port
Sep 14 21:17:32 petrata kernel: [ 264.670780] ata2.00: configured for UDMA/33
Sep 14 21:17:32 petrata kernel: [ 264.834448] ata2.01: configured for UDMA/66
Sep 14 21:17:32 petrata kernel: [ 264.834488] ata2: EH complete
I have a LITE-ON DVDRW SOHW-1673S. with firmware JS05. I have updated it to
JS0D.
Before the update, the above would take about 5 minutes, and k3b would not find
the burner. If I closed k3b and ran it again, the hard disk light would stay
lit and it would never get started. The drive is locked.
After the update, k3b takes about 10-20 seconds to get going and otherwise
works fine (just testing now with a CDRW).
Attached is the start of the k3b run.
It hangs at this point:
(K3bDevice::Device) /dev/scd1: checking for RAW_R96R
(K3bDevice::ScsiCommand) failed:
command: GET PERFORMANCE (ac)
errorcode: 72
sense key: NO SENSE (2)
asc: 0
ascq: 3
** Attachment added: "k3b_startup.txt"
http://launchpadlibrarian.net/9279832/k3b_startup.txt
--
ata2 2.6.20-13-generic ata2: port is slow to respond
https://bugs.launchpad.net/bugs/103277
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
