Public bug reported:
# lsb_release -rd
Description: Ubuntu 14.04.2 LTS
Release: 14.04
On a multi-homed 14.04 server, the post-up, up, pre-up, etc. scripts are
not executed when the network interface is brought up automatically
(auto ethN set) at boot.
ifup and ifdown do respect and run these commands if the auto ethN lines
are not set in the interfaces config.
/etc/network/interfaces
-----
# The loopback network interface
auto lo
iface lo inet loopback
# Management Net interface
auto eth0
iface eth0 inet static
address 192.168.50.52
netmask 255.255.255.0
up /sbin/ip route add 192.168.50.0/24 dev eth0 src 192.168.50.52 table
mgmtroute
up /sbin/ip route add default via 192.168.50.254 table mgmtroute
up /sbin/ip rule add from 192.168.50.0/24 table mgmtroute
# Public Net interface
auto eth1
iface eth1 inet static
address 192.168.60.52
netmask 255.255.255.0
gateway 192.168.60.254
up /sbin/ip route add 192.168.60.0/24 dev eth1 src 192.168.60.52 table
hostingroute
up /sbin/ip route add default via 192.168.60.254 table hostingroute
up /sbin/ip rule add from 192.168.60.0/24 table hostingroute
** Affects: ubuntu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1472055
Title:
/etc/network/interfaces up, post-up commands not run at network
startup
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1472055/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
