Public bug reported:
Problem Description
==========================
PCIe2 2-Port 10GbE Base-T Adapter fails to configure dhcp network
---uname output---
can't get uname as it will not install Ubuntu 14.04.3
Machine Type = 8408-E8E
---boot type---
Network boot
---bootloader---
grub
---Kernel cmdline used to launch install---
menuentry
---Bootloader protocol---
tftp
---Install repository type---
Internet repository
---Install repository Location---
ports.ubuntu.com
---Point of failure---
Other failure during installation (stage 1)
??????????????????????? [!!] Configure the network ????????????????????????
? ?
? Your system has multiple network interfaces. Choose the one to use as ?
? the primary network interface during the installation. If possible, ?
? the first connected network interface found has been selected. ?
? ?
? Primary network interface: ?
? ?
? eth0: Broadcom Corporation NetXtreme II BCM57810 10 Gigabit Ether ?
? eth1: Broadcom Corporation NetXtreme II BCM57810 10 Gigabit Ether ?
? ?
? <Go Back> ?
? ?
???????????????????????????????????????????????????????????????????????????
Choose eth0
?????????????????????? [!!] Configure the network ???????????????????????
? ?
? Network autoconfiguration failed ?
? Your network is probably not using the DHCP protocol. Alternatively, ?
? the DHCP server may be slow or some network hardware is not working ?
? properly. ?
? ?
? <Continue> ?
? ?
?????????????????????????????????????????????????????????????????????????
??????????????????????? [!!] Configure the network ????????????????????????
? ?
? From here you can choose to retry DHCP network autoconfiguration ?
? (which may succeed if your DHCP server takes a long time to respond) ?
? or to configure the network manually. Some DHCP servers require a ?
? DHCP hostname to be sent by the client, so you can also choose to ?
? retry DHCP network autoconfiguration with a hostname that you ?
? provide. ?
? ?
? Network configuration method: ?
? ?
? Retry network autoconfiguration ?
? Retry network autoconfiguration with a DHCP hostname ?
? Configure network manually ?
? ?
? Do not configure the network at this time ?
? ?
? <Go Back>
Even the manual setup fails.
** Affects: ubuntu
Importance: Undecided
Status: New
** Tags: architecture-ppc64 bugnameltc-127474 severity-critical
targetmilestone-inin14043
** Tags added: architecture-ppc64 bugnameltc-127474 severity-critical
targetmilestone-inin14043
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1473379
Title:
Shiner T will not configure dhcp during installation setup for Ubuntu
14.04.3
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1473379/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
