Jeremy, Here is my current dmesg | grep ath:
[ 3.803113] ath10k_pci 0000:07:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 4.056578] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/cal-pci-0000:07:00.0.bin failed with error -2 [ 4.059429] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2 [ 4.059435] ath10k_pci 0000:07:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 [ 4.151919] ath10k_pci 0000:07:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 11ad:0807 [ 4.151922] ath10k_pci 0000:07:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 4.152335] ath10k_pci 0000:07:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5 [ 4.242728] ath10k_pci 0000:07:00.0: board_file api 2 bmi_id N/A crc32 46b57247 [ 6.363125] ath10k_pci 0000:07:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 6.429154] ath: EEPROM regdomain: 0x6c [ 6.429157] ath: EEPROM indicates we should expect a direct regpair map [ 6.429158] ath: Country alpha2 being used: 00 [ 6.429159] ath: Regpair used: 0x6c [ 6.434396] ath10k_pci 0000:07:00.0 wlp7s0: renamed from wlan0 And I've never used the skip_otp=Y parameter on any kernel. It has no affect on the functionality, at least if the fix is applied correctly. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1520343 Title: Qualcomm Atheros wireless card [168c:003e] (rev 32) not supported To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1520343/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs