Public bug reported:

Gutsy with actual repo packages upgrade...
I use it at HP NX7300 
I make 2 profiles in network-admin

The first - Home 
wifi - 10:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan 
mini-PCI (rev 01)
The roaming mode enabled

ethernet - 02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 
100Base-TX (rev 02)
The roaming mode enabled

modem -- disabled

The second - Work
wifi - 10:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan 
mini-PCI (rev 01)
The roaming mode enabled

ethernet - 02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 
100Base-TX (rev 02)
Static IP configuration

When I use profile Home -- any problems...

When I change profile to Work -- system partialy frozen, i can`t open
terminal but tail logs in terminal which I open before change profiles
work, keys not work, but synaptics touchpad work. I cannot open a
network-admin, but firefox start !

When i plug off a ethernet cable the system logs this. 
When I click power button the system try logout user but any reactions. I must 
power off notebook and restart the machine.
After restart the Work profile works normally. I can join to wifi network and 
use wired connections with static IP. 
When I change to profile Home it`s still work normally. But when i change to 
Work the problem return.

cat /var/log/syslog

Oct  4 12:48:21 hornet kernel: [ 2391.628000] b44: eth0: Link is up at 100 
Mbps, full duplex.
Oct  4 12:48:21 hornet kernel: [ 2391.628000] b44: eth0: Flow control is off 
for TX and off for RX.
Oct  4 12:48:21 hornet kernel: [ 2391.628000] ADDRCONF(NETDEV_CHANGE): eth0: 
link becomes ready
Oct  4 12:48:23 hornet avahi-daemon[5229]: Registering new address record for 
fe80::217:a4ff:fedc:bdab on eth0.*.
Oct  4 12:48:26 hornet NetworkManager: <info>  User Switch: 
/org/freedesktop/NetworkManager/Devices/eth0 
Oct  4 12:48:26 hornet NetworkManager: <info>  Deactivating device eth0. 
Oct  4 12:48:26 hornet avahi-daemon[5229]: Withdrawing address record for 
fe80::217:a4ff:fedc:bdab on eth0.
Oct  4 12:48:26 hornet NetworkManager: <info>  Device eth0 activation 
scheduled... 
Oct  4 12:48:26 hornet NetworkManager: <info>  Deactivating device eth1. 
Oct  4 12:48:26 hornet dhclient: There is already a pid file 
/var/run/dhclient.eth1.pid with pid 6315
Oct  4 12:48:26 hornet dhclient: killed old client process, removed PID file
Oct  4 12:48:26 hornet dhclient: DHCPRELEASE on eth1 to 192.168.2.1 port 67
Oct  4 12:48:26 hornet avahi-daemon[5229]: Withdrawing address record for 
192.168.2.104 on eth1.
Oct  4 12:48:26 hornet avahi-daemon[5229]: Leaving mDNS multicast group on 
interface eth1.IPv4 with address 192.168.2.104.
Oct  4 12:48:26 hornet avahi-daemon[5229]: Interface eth1.IPv4 no longer 
relevant for mDNS.
Oct  4 12:48:27 hornet NetworkManager: <info>  SUP: sending command 
'DISABLE_NETWORK 0' 
Oct  4 12:48:27 hornet NetworkManager: <info>  SUP: response was 'OK' 
Oct  4 12:48:27 hornet NetworkManager: <info>  SUP: sending command 'AP_SCAN 0' 
Oct  4 12:48:27 hornet NetworkManager: <info>  SUP: response was 'OK' 
Oct  4 12:48:27 hornet NetworkManager: <info>  SUP: sending command 'TERMINATE' 
Oct  4 12:48:27 hornet NetworkManager: <info>  SUP: response was 'OK' 
Oct  4 12:48:27 hornet avahi-daemon[5229]: Withdrawing address record for 
fe80::21a:73ff:fe4f:3051 on eth1.
Oct  4 12:48:27 hornet NetworkManager: <info>  Activation (eth0) started... 
Oct  4 12:48:27 hornet NetworkManager: <info>  Activation (eth0) Stage 1 of 5 
(Device Prepare) scheduled... 
Oct  4 12:48:27 hornet NetworkManager: <info>  Activation (eth0) Stage 1 of 5 
(Device Prepare) started... 
Oct  4 12:48:27 hornet NetworkManager: <info>  Activation (eth0) Stage 2 of 5 
(Device Configure) scheduled... 
Oct  4 12:48:27 hornet NetworkManager: <info>  Activation (eth0) Stage 1 of 5 
(Device Prepare) complete. 
Oct  4 12:48:27 hornet NetworkManager: <info>  Activation (eth0) Stage 2 of 5 
(Device Configure) starting... 
Oct  4 12:48:27 hornet NetworkManager: <info>  Activation (eth0) Stage 2 of 5 
(Device Configure) successful. 
Oct  4 12:48:27 hornet NetworkManager: <info>  Activation (eth0) Stage 3 of 5 
(IP Configure Start) scheduled. 
Oct  4 12:48:27 hornet NetworkManager: <info>  Activation (eth0) Stage 2 of 5 
(Device Configure) complete. 
Oct  4 12:48:27 hornet NetworkManager: <info>  Activation (eth0) Stage 3 of 5 
(IP Configure Start) started... 
Oct  4 12:48:28 hornet NetworkManager: <info>  Activation (eth0) Beginning DHCP 
transaction. 
Oct  4 12:48:28 hornet dhclient: There is already a pid file 
/var/run/dhclient.eth0.pid with pid 134519120
Oct  4 12:48:28 hornet NetworkManager: <info>  Activation (eth0) Stage 3 of 5 
(IP Configure Start) complete. 
Oct  4 12:48:28 hornet NetworkManager: <info>  DHCP daemon state is now 12 
(successfully started) for interface eth0 
Oct  4 12:48:29 hornet NetworkManager: <info>  DHCP daemon state is now 1 
(starting) for interface eth0 
Oct  4 12:48:30 hornet NetworkManager: <info>  Old device 'eth0' activating, 
won't change. 
Oct  4 12:48:31 hornet dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 
67 interval 7
Oct  4 12:48:38 hornet dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 
67 interval 12
Oct  4 12:48:50 hornet dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 
67 interval 11
Oct  4 12:48:50 hornet kernel: [ 2420.132000] ADDRCONF(NETDEV_UP): eth1: link 
is not ready
Oct  4 12:48:53 hornet NetworkManager: <info>  /etc/network/interface changed: 
rebuilding the device list. 
Oct  4 12:48:53 hornet NetworkManager: <WARN>  ifparser_init(): Error: Can't 
parse inet line 'inet'  
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Oct  4 12:48:53 hornet NetworkManager: <info>  Removing wireless (802.11) 
device 'eth1'. 
Oct  4 12:48:53 hornet NetworkManager: <info>  Deactivating device eth1. 
Oct  4 12:48:53 hornet avahi-daemon[5229]: Joining mDNS multicast group on 
interface eth0.IPv4 with address xxx.xxx.xxx.xxx.
Oct  4 12:48:53 hornet NetworkManager: <info>  Removing wired Ethernet (802.3) 
device 'eth0'. 
Oct  4 12:48:53 hornet NetworkManager: <info>  Deactivating device eth0. 
Oct  4 12:48:53 hornet NetworkManager: <info>  Activation (eth0): cancelling... 
Oct  4 12:48:53 hornet NetworkManager: <info>  Activation (eth0) cancellation 
handler scheduled... 
Oct  4 12:48:53 hornet NetworkManager: <info>  Activation (eth0): waiting for 
device to cancel activation. 
Oct  4 12:48:53 hornet dhclient: There is already a pid file 
/var/run/dhclient.eth0.pid with pid 6497
Oct  4 12:48:53 hornet dhclient: killed old client process, removed PID file
Oct  4 12:48:53 hornet avahi-daemon[5229]: New relevant interface eth0.IPv4 for 
mDNS.
Oct  4 12:48:53 hornet avahi-daemon[5229]: Registering new address record for 
xxx.xxx.xxx.xxx on eth0.IPv4.
Oct  4 12:48:53 hornet avahi-daemon[5229]: Withdrawing address record for 
xxx.xxx.xxx.xxx on eth0.
Oct  4 12:48:53 hornet avahi-daemon[5229]: Leaving mDNS multicast group on 
interface eth0.IPv4 with address xxx.xxx.xxx.xxx
Oct  4 12:48:53 hornet avahi-daemon[5229]: Interface eth0.IPv4 no longer 
relevant for mDNS.
Oct  4 12:48:53 hornet avahi-daemon[5229]: Joining mDNS multicast group on 
interface eth0.IPv4 with address xxx.xxx.xxx.xxx.
Oct  4 12:48:53 hornet avahi-daemon[5229]: New relevant interface eth0.IPv4 for 
mDNS.
Oct  4 12:48:53 hornet avahi-daemon[5229]: Registering new address record for 
xxx.xxx.xxx.xxx on eth0.IPv4.
Oct  4 12:48:53 hornet dhclient: DHCPRELEASE on eth0 to 192.168.0.1 port 67
Oct  4 12:48:53 hornet avahi-daemon[5229]: Withdrawing address record for 
xxx.xxx.xxx.xxx on eth0.
Oct  4 12:48:53 hornet avahi-daemon[5229]: Leaving mDNS multicast group on 
interface eth0.IPv4 with address xxx.xxx.xxx.xxx.
Oct  4 12:48:53 hornet avahi-daemon[5229]: Interface eth0.IPv4 no longer 
relevant for mDNS.
Oct  4 12:48:54 hornet ntpdate[6600]: sendto(91.189.94.145): Network is 
unreachable
Oct  4 12:48:54 hornet NetworkManager: <info>  Activation (eth0): waiting for 
device to cancel activation. 
Oct  4 12:48:54 hornet NetworkManager: <info>  Activation (eth0) cancellation 
handled. 
Oct  4 12:48:54 hornet NetworkManager: <info>  Activation (eth0): cancelled. 
Oct  4 12:48:54 hornet NetworkManager: <info>  Recreating the device list. 
Oct  4 12:48:55 hornet kernel: [ 2425.036000] ADDRCONF(NETDEV_UP): eth1: link 
is not ready
Oct  4 12:48:55 hornet ntpdate[6600]: sendto(91.189.94.145): Network is 
unreachable
Oct  4 12:48:55 hornet NetworkManager: <info>  eth1: Device is fully-supported 
using driver 'bcm43xx'. 
Oct  4 12:48:55 hornet NetworkManager: <info>  nm_device_init(): waiting for 
device's worker thread to start 
Oct  4 12:48:55 hornet NetworkManager: <info>  nm_device_init(): device's 
worker thread started, continuing. 
Oct  4 12:48:55 hornet NetworkManager: <info>  Now managing wireless (802.11) 
device 'eth1'. 
Oct  4 12:48:55 hornet NetworkManager: <info>  Deactivating device eth1. 
Oct  4 12:48:55 hornet kernel: [ 2425.136000] SoftMAC: Open Authentication 
completed with 00:80:48:3d:5c:a7
Oct  4 12:48:55 hornet kernel: [ 2425.136000] ADDRCONF(NETDEV_UP): eth0: link 
is not ready
Oct  4 12:48:55 hornet NetworkManager: <info>  Device list recreated 
successfully. 
Oct  4 12:48:55 hornet NetworkManager: <info>  /etc/network/interface changed: 
rebuilding the device list. 
Oct  4 12:48:55 hornet NetworkManager: <info>  Removing wireless (802.11) 
device 'eth1'. 
Oct  4 12:48:55 hornet NetworkManager: <info>  Deactivating device eth1. 
Oct  4 12:48:56 hornet ntpdate[6600]: sendto(91.189.94.145): Network is 
unreachable
Oct  4 12:48:57 hornet ntpdate[6600]: sendto(91.189.94.145): Network is 
unreachable
Oct  4 12:48:57 hornet ntpdate[6600]: no server suitable for synchronization 
found

I plug off ethernet cable and plug on:

Oct  4 12:48:58 hornet kernel: [ 2428.136000] b44: eth0: Link is up at 100 
Mbps, full duplex.
Oct  4 12:48:58 hornet kernel: [ 2428.136000] b44: eth0: Flow control is off 
for TX and off for RX.
Oct  4 12:49:24 hornet kernel: [ 2454.152000] b44: eth0: Link is down.
Oct  4 12:49:31 hornet kernel: [ 2461.156000] b44: eth0: Link is up at 100 
Mbps, full duplex.
Oct  4 12:49:31 hornet kernel: [ 2461.156000] b44: eth0: Flow control is off 
for TX and off for RX.

When click power button:
Oct  4 12:50:18 hornet gnome-power-manager: (vdr) Interaktywne wylogowanie 
GNOME ponieważ klawisz zasilania został wciśnięty
"Interactive logout GNOME because power button was press"

** Affects: ubuntu
     Importance: Undecided
         Status: New

-- 
[gutsy] network-admin and profile
https://bugs.launchpad.net/bugs/148931
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to