Hi, After my upgrade from feisty to gutsy on my imac g3 , I tried to burn a cd with k3b and gnomebaker and I get similar problems. K3b has the following error message which looks similar:
System ----------------------- K3b Version: 1.0.3 KDE Version: 3.5.7 QT Version: 3.3.7 Kernel: 2.6.22-12-powerpc Devices ----------------------- MATSHITA CD-ROM CR-1760 ZA0E (/dev/hdb, ) [CD-ROM] [Fout] [Geen] MATSHITA CD-RW CW-7586 1.01 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM] [Fout] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R] Used versions ----------------------- cdrecord: 1.1.6 cdrecord ----------------------- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/scd0' devname: '/dev/scd0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.6 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'MATSHITA' Identification : 'CD-RW CW-7586 ' Revision : '1.01' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1467648 = 1433 KB FIFO size : 12582912 = 12288 KB Encoding speed : 131x (9799 sectors/s) for libedc from Heiko Eißfeldt Speed set to 1411 KB/s Track 01: data 724 MB Total size: 696 MB (69:00.41) = 310531 sectors Lout start: 696 MB (69:02/31) = 310531 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 6 Is not unrestricted Is not erasable Disk sub type: Medium Type C, low Beta category (C-) (6) ATIP start of lead in: -11231 (97:32/19) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 27 Manufacturer: Prodisc Technology Inc. Blocks total: 359846 Blocks current: 359846 Blocks remaining: 49315 Starting to write CD/DVD at speed 8.0 in real RAW/RAW96R mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... /usr/bin/wodim: WARNING: Drive returns wrong startsec (0) using -11231 from ATIP Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 FF FF D4 21 00 00 1A 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.005s timeout 40s /usr/bin/wodim: Could not write Lead-in. Writing lead-in at sector -11231 write leadin data: error after 0 bytes Writing time: 3.621s /usr/bin/wodim: fifo had 192 puts and 0 gets. /usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=8 -raw96r -clone /home/henne/Desktop/k3b_0.img -- GnomeBaker won't blank mounted CD-RW https://bugs.launchpad.net/bugs/147191 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
