Confirm this problem with Edgy knot3 upgraded from Dapper. Can't get an
IP for eth0, message is same as "send_packet: Message too long".
$lspci | grep Ethernet
00:12.0 Ethernet controller: National Semiconductor Corporation DP83815
(MacPhyter) Ethernet Controller
$lsmod | grep nat*
natsemi 30112 0
And, "sudo dhclient wlan0" (zd1211) is OK to get an IP, however there is
"SIOCSIFMTU: Invalid argument" message.
eth0 Link encap:Ethernet HWaddr (...)
UP BROADCAST MULTICAST MTU:64 Metric:1
RX packets:70 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9191 (8.9 KiB) TX bytes:1200 (1.1 KiB)
Interrupt:5 Base address:0x4000
wlan0 Link encap:Ethernet HWaddr (...)
inet addr:10.0.0.19 Bcast:255.255.255.255 Mask:255.255.255.0
inet6 addr: fe80::213:49ff:fe22:feed/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5485 errors:120 dropped:0 overruns:0 frame:120
TX packets:3512 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7197061 (6.8 MiB) TX bytes:372786 (364.0 KiB)
** Changed in: Ubuntu
Status: Unconfirmed => Confirmed
--
Network unreachable with Edgy
https://launchpad.net/bugs/58927
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
