WiFi is working with 4.7-rc2 so far.
But I'm not sure if it's due to that I installed
http://mirrors.kernel.org/ubuntu/pool/main/l/linux-firmware/linux-
firmware_1.158_all.deb before to get the card to work.
I've added the dmesg | grep ath10k for you as well. The WiFi is working
with this new kernel.
etecs@etecsdev:~$ dmesg | grep ath10k
[ 18.087548] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0
reset_mode 0
[ 18.615816] ath10k_pci 0000:02:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[ 18.615871] ath10k_pci 0000:02:00.0: Direct firmware load for
ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[ 19.225299] ath10k_pci 0000:02:00.0: qca6164 hw2.1 target 0x05010000 chip_id
0x003405ff sub 17aa:3545
[ 19.225305] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs
0 testmode 0
[ 19.225692] ath10k_pci 0000:02:00.0: firmware ver
SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 features ignore-otp,no-4addr-pad crc32
10bf8e08
[ 19.306993] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32
f4573aa9
[ 20.478806] ath10k_pci 0000:02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp
max-sta 32 raw 0 hwcrypto 1
[ 20.620264] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[ 39.784968] ath10k_pci 0000:02:00.0: no channel configured; ignoring
frame(s)!
[ 58.349674] ath10k_pci 0000:02:00.0: no channel configured; ignoring
frame(s)!
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1586630
Title:
Wireless card QCA6164 crashes when booting
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1586630/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
