*** This bug is a duplicate of bug 145382 ***
https://bugs.launchpad.net/bugs/145382
new to Ubuntu so whats /etc/iftab?
I just did a clean Gutsy install on a Thinkpad T21 of server, during
install it found the NIC as eth0 but boots with eth1.
*-network
description: Ethernet interface
product: 82557/8/9 Ethernet Pro 100
vendor: Intel Corporation
physical id: 3
bus info: [EMAIL PROTECTED]:00:03.0
logical name: eth1
version: 09
serial: 00:10:a4:84:28:0e
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt
10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e100
driverversion=3.5.17-k4-NAPI duplex=full firmware=N/A ip=10.0.90.143 latency=66
link=yes maxlatency=56 mingnt=8 module=e100 multicast=yes port=MII speed=100MB/s
00:03.0 Ethernet controller: Intel Corporation 82557/8/9 Ethernet Pro
100 (rev 09)
[ 15.218862] e100: eth0: e100_probe: addr 0xe8120000, irq 11, MAC addr
00:10:A4:84:28:0E
I also see #47990, which seems to be closed as iftab issue also but
doesnt explain. I dont have a iftab
[EMAIL PROTECTED]:~# ls -la /etc/iftab
ls: /etc/iftab: No such file or directory
[EMAIL PROTECTED]:~# uname -a
Linux T21 2.6.22-12-server #1 SMP Sun Sep 23 18:45:59 GMT 2007 i686 GNU/Linux
[EMAIL PROTECTED]:~#
--
[GUTSY] LAN cards detected as eth0 and eth1, but eth0 and eth1 wants only to
bring up as eth2 and eth3
https://bugs.launchpad.net/bugs/144263
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
