------- Comment From [email protected] 2016-09-07 05:49 EDT------- Thank you Christian. I have verified your dev07 deb for dpdk using testpmd on top of virtio pmd for packet forwarding sanity.
test@ubu1610-0830:~$ sudo testpmd -c 0xf -d /usr/lib/powerpc64le-linux-gnu/librte_pmd_virtio.so -- -i EAL: Detected 32 lcore(s) EAL: Probing VFIO support... EAL: PCI device 0000:00:08.0 on NUMA socket -1 EAL: probe driver: 1af4:1000 rte_virtio_pmd EAL: PCI device 0000:00:09.0 on NUMA socket -1 EAL: probe driver: 1af4:1000 rte_virtio_pmd Interactive-mode selected USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socket=0 Configuring Port 0 (socket 0) Port 0: 52:54:C0:A2:7C:43 Configuring Port 1 (socket 0) Port 1: 52:54:C0:A2:7C:44 Checking link statuses... Port 0 Link Up - speed 10000 Mbps - full-duplex Port 1 Link Up - speed 10000 Mbps - full-duplex Done testpmd> start io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support disabled, MP over anonymous pages disabled Logical Core 1 (socket 0) forwards packets on 2 streams: RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01 RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00 io packet forwarding - CRC stripping disabled - packets/burst=32 nb forwarding cores=1 - nb forwarding ports=2 RX queues=1 - RX desc=128 - RX free threshold=0 RX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX queues=1 - TX desc=512 - TX free threshold=0 TX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX RS bit threshold=0 - TXQ flags=0xf00 testpmd> stop Telling cores to stop... Waiting for lcores to finish... ---------------------- Forward statistics for port 0 ---------------------- RX-packets: 857474 RX-dropped: 0 RX-total: 857474 TX-packets: 433345 TX-dropped: 98 TX-total: 433443 ---------------------------------------------------------------------------- ---------------------- Forward statistics for port 1 ---------------------- RX-packets: 433443 RX-dropped: 0 RX-total: 433443 TX-packets: 853543 TX-dropped: 3931 TX-total: 857474 ---------------------------------------------------------------------------- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ RX-packets: 1290917 RX-dropped: 0 RX-total: 1290917 TX-packets: 1286888 TX-dropped: 4029 TX-total: 1290917 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Done. testpmd> quit Shutting down port 0... Stopping ports... Done Closing ports... Done Shutting down port 1... Stopping ports... Done Closing ports... Done Bye... test@ubu1610-0830:~$ uname -a Linux ubu1610-0830 4.4.0-9136-generic #55-Ubuntu SMP Fri Aug 26 05:56:24 UTC 2016 ppc64le ppc64le ppc64le GNU/Linux test@ubu1610-0830:~$ cat /etc/issue Ubuntu Yakkety Yak (development branch) \n \l Above sanity was done with Yakkety kvm guest running dpdk, due to some issues I am facing to setup yakkety on a baremetal. If the above test is fine, could you please integrate your changes and release dpdk in yakkety ?. Thanks. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1539775 Title: Enable ppc64el on dpdk To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dpdk/+bug/1539775/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
