** Description changed:

  OS: Xubuntu 16.04.1
  Printer Device: Brother DCP1610W
  
  My printer is not working on my desktop. I've installed both drivers
  under "printer" in the following link:
  
http://support.brother.com/g/b/downloadlist.aspx?c=as_ot&lang=en&prod=dcp1610w_eu_as&os=128
  
  The scanner works perfectly fine. I should mention that I've it working
  on my laptop with exactly the same drivers and OS. After clicking on
  "Print", the job status is "completed" but nothing gets printed. I can't
  print test pages.
+ 
+ Any idea what might be happening and I should I go about fixing this?
  
  Here are the outputs of [CODE]tail -f /var/log/syslog [/CODE] before and
  after plugging my printer:
  
  [CODE]Aug 19 11:50:26 mypc kernel: [  124.382330] usblp 3-10.3:1.0: usblp1: 
USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x035B
  Aug 19 11:50:50 mypc org.freedesktop.PackageKit[3064]: DEBUG:Checking for 
inactivity (30s)
  Aug 19 11:51:20 mypc org.freedesktop.PackageKit[3064]: DEBUG:Checking for 
inactivity (60s)
  Aug 19 11:51:36 mypc kernel: [  193.883546] usb 3-10.3: USB disconnect, 
device number 5
  Aug 19 11:51:36 mypc kernel: [  193.883747] usblp1: removed
  Aug 19 11:51:36 mypc udev-configure-printer[5268]: remove 
/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3
  Aug 19 11:51:36 mypc udev-configure-printer[5268]: URI of detected printer: 
usb://Brother/DCP-1610W%20series?serial=E74230B5N526398, normalized: brother 
dcp 1610w series serial e74230b5n526398
  Aug 19 11:51:36 mypc udev-configure-printer[5268]: URI of print queue: 
usb://Brother/DCP-1610W%20series?serial=E74230B5N526398, normalized: brother 
dcp 1610w series serial e74230b5n526398
  Aug 19 11:51:36 mypc udev-configure-printer[5268]: Queue 
ipp://localhost/printers/Brother-DCP-1610W-series has matching device URI
  Aug 19 11:51:36 mypc udev-configure-printer[5268]: Disabled printer 
ipp://localhost/printers/Brother-DCP-1610W-series as the corresponding device 
was unplugged or turned off
  Aug 19 11:51:40 mypc colord-sane: io/hpmud/pp.c 627: unable to read device-id 
ret=-1
  Aug 19 11:51:43 mypc kernel: [  200.962335] usb 3-10.3: new high-speed USB 
device number 6 using xhci_hcd
  Aug 19 11:51:43 mypc kernel: [  201.051201] usb 3-10.3: New USB device found, 
idVendor=04f9, idProduct=035b
  Aug 19 11:51:43 mypc kernel: [  201.051204] usb 3-10.3: New USB device 
strings: Mfr=0, Product=0, SerialNumber=3
  Aug 19 11:51:43 mypc kernel: [  201.051205] usb 3-10.3: SerialNumber: 
E74230B5N526398
  Aug 19 11:51:43 mypc kernel: [  201.053024] usblp 3-10.3:1.0: usblp1: USB 
Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04F9 pid 0x035B
  Aug 19 11:51:43 mypc systemd[1]: Starting Automatic USB/Bluetooth printer 
setup (-devices-pci0000:00-0000:00:14.0-usb3-3\x2d10-3\x2d10.3)...
  Aug 19 11:51:43 mypc udev-configure-printer[5285]: add 
/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3
  Aug 19 11:51:43 mypc udev-configure-printer[5285]: device devpath is 
/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3
  Aug 19 11:51:43 mypc udev-configure-printer[5285]: MFG:Brother MDL:DCP-1610W 
series SERN:- serial:E74230B5N526398
  Aug 19 11:51:43 mypc kernel: [  201.078847] audit_printk_skb: 63 callbacks 
suppressed
  Aug 19 11:51:43 mypc kernel: [  201.078850] audit: type=1400 
audit(1471603903.429:118): apparmor="DENIED" operation="open" 
profile="/usr/sbin/ippusbxd" name="/etc/ld.so.preload" pid=5299 comm="ippusbxd" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
  Aug 19 11:51:47 mypc colord-sane: io/hpmud/pp.c 627: unable to read device-id 
ret=-1
  Aug 19 11:51:48 mypc kernel: [  206.136838] audit: type=1400 
audit(1471603908.485:119): apparmor="DENIED" operation="open" 
profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=5309 comm="cups-exec" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
  Aug 19 11:51:48 mypc kernel: [  206.137116] audit: type=1400 
audit(1471603908.485:120): apparmor="DENIED" operation="open" 
profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=5309 
comm="cups-deviced" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
  Aug 19 11:51:48 mypc kernel: [  206.140017] audit: type=1400 
audit(1471603908.489:121): apparmor="DENIED" operation="open" 
profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=5311 comm="ipp" 
requested_mask="r" denied_mask="r" fsuid=7 ouid=0
  Aug 19 11:51:48 mypc kernel: [  206.145184] audit: type=1400 
audit(1471603908.493:122): apparmor="DENIED" operation="open" 
profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=5314 comm="serial" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
  Aug 19 11:51:48 mypc kernel: [  206.148449] audit: type=1400 
audit(1471603908.497:123): apparmor="DENIED" operation="open" 
profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=5316 comm="ipps" 
requested_mask="r" denied_mask="r" fsuid=7 ouid=0
  Aug 19 11:51:48 mypc kernel: [  206.150067] audit: type=1400 
audit(1471603908.497:124): apparmor="DENIED" operation="open" 
profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=5320 comm="usb" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
  Aug 19 11:51:48 mypc kernel: [  206.156124] usblp1: removed
  Aug 19 11:51:48 mypc kernel: [  206.163011] usblp 3-10.3:1.0: usblp1: USB 
Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04F9 pid 0x035B
  Aug 19 11:51:48 mypc hp[5313]: io/hpmud/pp.c 627: unable to read device-id 
ret=-1
  Aug 19 11:51:48 mypc python3: io/hpmud/pp.c 627: unable to read device-id 
ret=-1
  Aug 19 11:51:48 mypc udev-configure-printer[5285]: URI contains USB serial 
number
  Aug 19 11:51:48 mypc udev-configure-printer[5285]: URI match: 
usb://Brother/DCP-1610W%20series?serial=E74230B5N526398
  Aug 19 11:51:48 mypc udev-configure-printer[5285]: URI of detected printer: 
usb://Brother/DCP-1610W%20series?serial=E74230B5N526398, normalized: brother 
dcp 1610w series serial e74230b5n526398
  Aug 19 11:51:48 mypc udev-configure-printer[5285]: URI of print queue: 
usb://Brother/DCP-1610W%20series?serial=E74230B5N526398, normalized: brother 
dcp 1610w series serial e74230b5n526398
  Aug 19 11:51:48 mypc udev-configure-printer[5285]: Queue 
ipp://localhost/printers/Brother-DCP-1610W-series has matching device URI
  Aug 19 11:51:48 mypc udev-configure-printer[5285]: Re-enabled printer 
ipp://localhost/printers/Brother-DCP-1610W-series
  Aug 19 11:51:48 mypc systemd[1]: Started Automatic USB/Bluetooth printer 
setup (-devices-pci0000:00-0000:00:14.0-usb3-3\x2d10-3\x2d10.3).
  Aug 19 11:51:50 mypc org.freedesktop.PackageKit[3064]: DEBUG:Checking for 
inactivity (90s)
  ^C[/CODE]
  
- My printer is the Brother-DCP 1610w. I can scan perfectly fine with it,
- it's just the printing that's not working. Under "Printers", I see the
- printer there with the green check-mark, though after asking to print
- something, nothing happens.
+ --------------------------------
  
- Any idea what might be happening and I should I go about fixing this?
  
- EDIT: If I go to "Printers", I see the jobs as "completed".
- 
- EDIT2:
  Doing `sudo cat /etc/cups/printers.conf` while the printer is turned OFF 
gives me the following:
  
  [CODE]# Printer configuration file for CUPS v2.1.3
      # Written by cupsd
      # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
      <DefaultPrinter Brother-DCP-1610W-series>
      UUID urn:uuid:3f49b902-e331-31f5-558a-cf8be931977d
      Info Brother DCP-1610W series
      Location mypc
      MakeModel Brother DCP-1610W for CUPS
      DeviceURI usb://Brother/DCP-1610W%20series?serial=E74230B5N526398
      State Stopped
      StateMessage Unplugged or turned off
      StateTime 1471611395
      ConfigTime 1471603824
      Reason paused
      Type 8392708
      Accepting Yes
      Shared Yes
      JobSheets none none
      QuotaPeriod 0
      PageLimit 0
      KLimit 0
      OpPolicy default
      ErrorPolicy retry-job
      </DefaultPrinter>
      <Printer DCP1610W>
      UUID urn:uuid:b62f3751-a91c-39b0-59ee-2fb82efd5755
      Info DCP1610W
      MakeModel Brother DCP-1610W for CUPS
      DeviceURI usb://Brother/DCP-1610W%20series?serial=E74230B5N526398
      State Stopped
      StateMessage Unplugged or turned off
      StateTime 1471611395
      ConfigTime 1471606686
      Reason paused
      Type 8392708
      Accepting Yes
      Shared Yes
      JobSheets none none
      QuotaPeriod 0
      PageLimit 0
      KLimit 0
      OpPolicy default
      ErrorPolicy retry-job
      </Printer>[/CODE]
  
  With the printer ON, I get:
  
  [CODE]# Printer configuration file for CUPS v2.1.3
      # Written by cupsd
      # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
      <DefaultPrinter Brother-DCP-1610W-series>
      UUID urn:uuid:3f49b902-e331-31f5-558a-cf8be931977d
      Info Brother DCP-1610W series
      Location mypc
      MakeModel Brother DCP-1610W for CUPS
      DeviceURI usb://Brother/DCP-1610W%20series?serial=E74230B5N526398
      State Idle
      StateTime 1471702911
      ConfigTime 1471603824
      Type 8392708
      Accepting Yes
      Shared Yes
      JobSheets none none
      QuotaPeriod 0
      PageLimit 0
      KLimit 0
      OpPolicy default
      ErrorPolicy retry-job
      </DefaultPrinter>
      <Printer DCP1610W>
      UUID urn:uuid:b62f3751-a91c-39b0-59ee-2fb82efd5755
      Info DCP1610W
      MakeModel Brother DCP-1610W for CUPS
      DeviceURI usb://Brother/DCP-1610W%20series?serial=E74230B5N526398
      State Idle
      StateTime 1471702911
      ConfigTime 1471606686
      Type 8392708
      Accepting Yes
      Shared Yes
      JobSheets none none
      QuotaPeriod 0
      PageLimit 0
      KLimit 0
      OpPolicy default
      ErrorPolicy retry-job
      </Printer>[/CODE]
  
  I've also tried to print via wireless, but the same thing happens, job
  status is "completed" but nothing gets printed.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1620038

Title:
  Printing job is "completed" but nothing gets printed

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1620038/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to