This is all what is in dmesg (after bootup)
[   33.232428] qla2xxx [0000:13:00.0]-d001:3: Firmware dump saved to temp 
buffer (3/ffffc900009c2000), dump status flags (0x3f).
[   33.232472] qla2xxx [0000:13:00.0]-101e:3: Mailbox cmd timeout occurred, 
cmd=0x69, mb[0]=0x69. Scheduling ISP abort
[   33.232478] qla2xxx [0000:13:00.0]-00af:3: Performing ISP error recovery - 
ha=ffff880035530000.
[   33.969181] qla2xxx [0000:13:00.0]-500a:3: LOOP UP detected (8 Gbps).
[   34.065174] qla2xxx [0000:13:00.0]-803b:3: Firmware ready **** FAILED ****.
[   64.356819] qla2xxx [0000:13:00.0]-d009:3: Firmware has been previously 
dumped (ffffc900009c2000) -- ignoring request.
[   64.356886] qla2xxx [0000:13:00.0]-101e:3: Mailbox cmd timeout occurred, 
cmd=0x69, mb[0]=0x69. Scheduling ISP abort
[   64.356890] qla2xxx [0000:13:00.0]-00af:3: Performing ISP error recovery - 
ha=ffff880035530000.
[   65.081511] qla2xxx [0000:13:00.0]-500a:3: LOOP UP detected (8 Gbps).
[   65.193576] qla2xxx [0000:13:00.0]-803b:3: Firmware ready **** FAILED ****.
[   95.362076] qla2xxx [0000:13:00.0]-d009:3: Firmware has been previously 
dumped (ffffc900009c2000) -- ignoring request.
[   95.362181] qla2xxx [0000:13:00.0]-101e:3: Mailbox cmd timeout occurred, 
cmd=0x69, mb[0]=0x69. Scheduling ISP abort
[   95.362186] qla2xxx [0000:13:00.0]-00af:3: Performing ISP error recovery - 
ha=ffff880035530000.
[   96.102053] qla2xxx [0000:13:00.0]-500a:3: LOOP UP detected (8 Gbps).
[   96.198014] qla2xxx [0000:13:00.0]-803b:3: Firmware ready **** FAILED ****.


There are some extra lines containing qla2xxx during bootup:
[    1.883366] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 
8.07.00.26-k.
[    1.884125] qla2xxx [0000:13:00.0]-001d: : Found an ISP2532 irq 16 iobase 
0xffffc900003b4000.
(...)
[    2.221204] scsi host3: qla2xxx
[    2.221775] qla2xxx [0000:13:00.0]-00fb:3: QLogic QLE2562 - QLogic 8Gb FC 
Dual-port HBA for System x.
[    2.221870] qla2xxx [0000:13:00.0]-00fc:3: ISP2532: PCIe (5.0GT/s x32) @ 
0000:13:00.0 hdma- host#=3 fw=8.03.00 (90d5).

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1625157

Title:
  QLogic qla2xxx firmware fails

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1625157/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to