Public bug reported:
It suspends then automatically resumes a few seconds later. Latest
kernel update brings back screen auto-rotate feature, but also breaks
suspend. Not sure if this is related. Previous few kernel releases had
auto-rotate feature disabled, but suspend worked properly and did not
resume from suspend automatically.
[ 737.222140] PM: Syncing filesystems ... done.
[ 737.233688] PM: Preparing system for sleep (mem)
[ 737.234034] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 737.236194] Double checking all user space processes after OOM killer
disable... (elapsed 0.000 seconds)
[ 737.236333] Freezing remaining freezable tasks ... (elapsed 0.000 seconds)
done.
[ 737.237252] PM: Suspending system (mem)
[ 737.237283] Suspending console(s) (use no_console_suspend to debug)
[ 737.404190] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 737.406041] sd 0:0:0:0: [sda] Stopping disk
[ 738.065297] PM: suspend of devices complete after 827.881 msecs
[ 738.085132] PM: late suspend of devices complete after 19.829 msecs
[ 738.086363] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 738.105461] PM: noirq suspend of devices complete after 20.326 msecs
[ 738.105897] ACPI: Preparing to enter system sleep state S3
[ 738.361104] ACPI : EC: EC stopped
[ 738.361105] PM: Saving platform NVS memory
[ 738.361121] Disabling non-boot CPUs ...
[ 738.361598] Broke affinity for irq 23
[ 738.361604] Broke affinity for irq 40
[ 738.361611] Broke affinity for irq 43
[ 738.363673] smpboot: CPU 1 is now offline
[ 738.386513] Broke affinity for irq 23
[ 738.386519] Broke affinity for irq 40
[ 738.386525] Broke affinity for irq 43
[ 738.386533] Broke affinity for irq 59
[ 738.387594] smpboot: CPU 2 is now offline
[ 738.418497] Broke affinity for irq 1
[ 738.418508] Broke affinity for irq 9
[ 738.418513] Broke affinity for irq 12
[ 738.418520] Broke affinity for irq 23
[ 738.418523] Broke affinity for irq 40
[ 738.418526] Broke affinity for irq 42
[ 738.418528] Broke affinity for irq 43
[ 738.418534] Broke affinity for irq 59
[ 738.419573] smpboot: CPU 3 is now offline
[ 738.440159] ACPI: Low-level resume complete
[ 738.440235] ACPI : EC: EC started
[ 738.440236] PM: Restoring platform NVS memory
[ 738.440625] Enabling non-boot CPUs ...
[ 738.463840] x86: Booting SMP configuration:
[ 738.463841] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 738.466739] cache: parent cpu1 should not be sleeping
[ 738.466961] CPU1 is up
[ 738.487864] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 738.490555] cache: parent cpu2 should not be sleeping
[ 738.490870] CPU2 is up
[ 738.535883] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 738.538658] cache: parent cpu3 should not be sleeping
[ 738.539378] CPU3 is up
[ 738.549959] ACPI: Waking up from system sleep state S3
[ 739.483697] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 739.483772] PM: noirq resume of devices complete after 32.141 msecs
[ 739.484169] PM: early resume of devices complete after 0.371 msecs
[ 739.487691] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 739.488427] sd 0:0:0:0: [sda] Starting disk
[ 739.531853] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout
[ 739.547494] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
[ 739.635640] usb 1-1.7: reset full-speed USB device number 3 using ehci-pci
[ 739.783794] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[ 739.802392] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 739.802641] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 739.802643] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 739.802723] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 739.802888] ata1.00: supports DRM functions and may not be fully accessible
[ 739.803249] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 739.803251] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 739.803272] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[ 739.803357] ata1.00: supports DRM functions and may not be fully accessible
[ 739.803421] ata1.00: configured for UDMA/133
[ 739.823628] usb 1-1.8: reset full-speed USB device number 5 using ehci-pci
[ 740.043736] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[ 740.070524] psmouse serio1: synaptics: queried max coordinates: x [..5710],
y [..4696]
[ 740.112849] psmouse serio1: synaptics: queried min coordinates: x [1232..],
y [1156..]
[ 740.112853] psmouse serio1: synaptics: quirked min/max coordinates: x
[1232..5710], y [1156..4696]
[ 740.303742] usb 2-5: reset full-speed USB device number 3 using xhci_hcd
[ 741.002549] PM: resume of devices complete after 1518.432 msecs
[ 741.002644] usb 2-4:1.0: rebind failed: -517
[ 741.002647] usb 2-4:1.1: rebind failed: -517
[ 741.002894] PM: Finishing wakeup.
[ 741.002895] Restarting tasks ...
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1650752
Title:
Thinkpad Yoga 13 fails to suspend after update to 4.8.0.30.39
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1650752/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
