*** This bug is a duplicate of bug 1232928 ***
https://bugs.launchpad.net/bugs/1232928
Public bug reported:
I have added COUNTRY=GB to /etc/default/crda. During boot the RD is
correctly set:
[ 28.766534] cfg80211: World regulatory domain updated:
[ 28.766541] cfg80211: DFS Master region: unset
[ 28.766543] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 28.766546] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 28.766549] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 28.766552] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 28.766555] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 28.766559] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 28.766561] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 28.766564] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 28.766567] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 28.913419] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.914230] ieee80211 phy0: hwaddr 00:16:44:a4:26:df, RTL8187BvE V0 +
rtl8225z2, rfkill mask 2
[ 28.936096] rtl8187: Customer ID is 0x04
[ 28.947344] rtl8187: wireless switch is on
[ 28.947535] usbcore: registered new interface driver rtl8187
[ 28.949935] rtl8187 1-2:1.0 wlx001644a426df: renamed from wlan0
[ 29.093483] cfg80211: Regulatory domain changed to country: GB
[ 29.093490] cfg80211: DFS Master region: ETSI
[ 29.093492] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 29.093495] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 29.093498] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 29.093502] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 29.093505] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700
mBm), (0 s)
[ 29.093507] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
But when the interface is associated it is incorrectly reset:
[ 472.548695] wlx001644a426df: authenticate with c0:3e:<cut>
[ 472.823175] wlx001644a426df: send auth to c0:3e:<cut> (try 1/3)
[ 472.824852] wlx001644a426df: authenticated
[ 472.828048] wlx001644a426df: associate with c0:3e:<cut> (try 1/3)
[ 472.831871] wlx001644a426df: RX AssocResp from c0:3e:<cut> (capab=0x1411
status=0 aid=5)
[ 472.835223] wlx001644a426df: associated
[ 472.835295] IPv6: ADDRCONF(NETDEV_CHANGE): wlx001644a426df: link becomes
ready
[ 472.843644] cfg80211: Regulatory domain changed to country: DE
[ 472.843650] cfg80211: DFS Master region: ETSI
[ 472.843653] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 472.843656] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 472.843659] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 472.843663] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 472.843666] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698
mBm), (0 s)
[ 472.843668] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 472.933487] wlx001644a426df: Limiting TX power to 20 (20 - 0) dBm as
advertised by c0:3e:<cut>
Now, if I HUP wpa_supplicant then it correctly sets the RD again:
[ 1661.809047] wlx001644a426df: deauthenticating from c0:3e:<cut> by local
choice (Reason: 3=DEAUTH_LEAVING)
[ 1661.965254] cfg80211: World regulatory domain updated:
[ 1661.965262] cfg80211: DFS Master region: unset
[ 1661.965264] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1661.965268] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 1661.965271] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 1661.965274] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 1661.965277] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 1661.965280] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 1661.965283] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000
mBm), (0 s)
[ 1661.965286] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 1661.965288] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 1661.983415] cfg80211: Regulatory domain changed to country: GB
[ 1661.983422] cfg80211: DFS Master region: ETSI
[ 1661.983424] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1661.983428] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 1661.983431] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 1661.983435] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 1661.983438] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700
mBm), (0 s)
[ 1661.983440] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
But now I'm not associated with the AP.
I tried adding "iw reg set GB" to the "start" area of
/etc/network/if-up.d/wpasupplicant but that didn't work. I may have put it in
the incorrect place though.
I can't find an NM configuration that overrides the default file.
Is there something wrong with a script somewhere?
At this moment in time I am unaware of a workaround. I'll probably have
to remove NM as usual.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: wpasupplicant 2.4-0ubuntu6
ProcVersionSignature: Ubuntu 4.4.0-65.86-generic 4.4.49
Uname: Linux 4.4.0-65-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.5
Architecture: amd64
Date: Mon Mar 6 11:06:24 2017
InstallationDate: Installed on 2017-02-27 (6 days ago)
InstallationMedia: Ubuntu-Server 16.04.1 LTS "Xenial Xerus" - Release amd64
(20160719)
SourcePackage: wpa
UpgradeStatus: No upgrade log present (probably fresh install)
** Affects: network-manager (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug xenial
** Package changed: wpa (Ubuntu) => network-manager (Ubuntu)
** Summary changed:
- wpa_supplicant resets regulatory domain to incorrect value
+ NetworkManager resets regulatory domain to incorrect value
** Description changed:
I have added COUNTRY=GB to /etc/default/crda. During boot the RD is
correctly set:
[ 28.766534] cfg80211: World regulatory domain updated:
[ 28.766541] cfg80211: DFS Master region: unset
[ 28.766543] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 28.766546] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 28.766549] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 28.766552] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm), (N/A)
[ 28.766555] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 28.766559] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 28.766561] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 28.766564] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 28.766567] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A,
0 mBm), (N/A)
[ 28.913419] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.914230] ieee80211 phy0: hwaddr 00:16:44:a4:26:df, RTL8187BvE V0 +
rtl8225z2, rfkill mask 2
[ 28.936096] rtl8187: Customer ID is 0x04
[ 28.947344] rtl8187: wireless switch is on
[ 28.947535] usbcore: registered new interface driver rtl8187
[ 28.949935] rtl8187 1-2:1.0 wlx001644a426df: renamed from wlan0
[ 29.093483] cfg80211: Regulatory domain changed to country: GB
[ 29.093490] cfg80211: DFS Master region: ETSI
[ 29.093492] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 29.093495] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 29.093498] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 29.093502] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 29.093505] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A,
2700 mBm), (0 s)
[ 29.093507] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
But when the interface is associated it is incorrectly reset:
[ 472.548695] wlx001644a426df: authenticate with c0:3e:<cut>
[ 472.823175] wlx001644a426df: send auth to c0:3e:<cut> (try 1/3)
[ 472.824852] wlx001644a426df: authenticated
[ 472.828048] wlx001644a426df: associate with c0:3e:<cut> (try 1/3)
[ 472.831871] wlx001644a426df: RX AssocResp from c0:3e:<cut> (capab=0x1411
status=0 aid=5)
[ 472.835223] wlx001644a426df: associated
[ 472.835295] IPv6: ADDRCONF(NETDEV_CHANGE): wlx001644a426df: link becomes
ready
[ 472.843644] cfg80211: Regulatory domain changed to country: DE
[ 472.843650] cfg80211: DFS Master region: ETSI
[ 472.843653] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 472.843656] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 472.843659] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 472.843663] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 472.843666] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A,
2698 mBm), (0 s)
[ 472.843668] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
[ 472.933487] wlx001644a426df: Limiting TX power to 20 (20 - 0) dBm as
advertised by c0:3e:<cut>
Now, if I HUP wpa_supplicant then it correctly sets the RD again:
[ 1661.809047] wlx001644a426df: deauthenticating from c0:3e:<cut> by local
choice (Reason: 3=DEAUTH_LEAVING)
[ 1661.965254] cfg80211: World regulatory domain updated:
[ 1661.965262] cfg80211: DFS Master region: unset
[ 1661.965264] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1661.965268] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 1661.965271] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 1661.965274] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A,
2000 mBm), (N/A)
[ 1661.965277] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 1661.965280] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 1661.965283] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A,
2000 mBm), (0 s)
[ 1661.965286] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A,
2000 mBm), (N/A)
[ 1661.965288] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A,
0 mBm), (N/A)
[ 1661.983415] cfg80211: Regulatory domain changed to country: GB
[ 1661.983422] cfg80211: DFS Master region: ETSI
[ 1661.983424] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1661.983428] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A,
2000 mBm), (N/A)
[ 1661.983431] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (N/A)
[ 1661.983435] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz
AUTO), (N/A, 2000 mBm), (0 s)
[ 1661.983438] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A,
2700 mBm), (0 s)
[ 1661.983440] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
But now I'm not associated with the AP.
- Is there something wrong with a script somewhere, or is NetworkManager
- to blame?
-
I tried adding "iw reg set GB" to the "start" area of
/etc/network/if-up.d/wpasupplicant but that didn't work. I may have put it in
the incorrect place though.
I can't find an NM configuration that overrides the default file.
- At this moment in time I am unaware of a workaround.
+ Is there something wrong with a script somewhere?
- Note: I wanted to change affected package to NM but apparently the
- search functionality doesn't work at the moment - I think it's more
- likely to be caused by NM than wpa_supplicant, as most things are.
+ At this moment in time I am unaware of a workaround. I'll probably have
+ to remove NM as usual.
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: wpasupplicant 2.4-0ubuntu6
ProcVersionSignature: Ubuntu 4.4.0-65.86-generic 4.4.49
Uname: Linux 4.4.0-65-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.5
Architecture: amd64
Date: Mon Mar 6 11:06:24 2017
InstallationDate: Installed on 2017-02-27 (6 days ago)
InstallationMedia: Ubuntu-Server 16.04.1 LTS "Xenial Xerus" - Release amd64
(20160719)
SourcePackage: wpa
UpgradeStatus: No upgrade log present (probably fresh install)
** This bug has been marked a duplicate of bug 1232928
crda defaults file not honoured on wireless association
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1670325
Title:
NetworkManager resets regulatory domain to incorrect value
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1670325/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
